Regulation 2021/2278 - Suspension of the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products

0.6789

ex 1512 19 10

10

Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of

—	conjugated linoleic acid of heading 3823 or

—	ethyl- or methyl esters of linoleic acid of heading 2916 (1)

0 %

-

31.12.2022

0.3341

ex 1515 90 99

92

Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid

0 %

-

31.12.2023

0.7686

1516 20 10

Hydrogenated castor oil, so called ‘opal-wax’

0 %

-

31.12.2023

0.4708

ex 1516 20 96

20

Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process

0 %

-

31.12.2024

0.4080

ex 1517 90 99

10

Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)

0 %

-

31.12.2026

0.6182

ex 1901 90 99

ex 2106 90 98

39

45

Preparation in powder form containing by weight:

—	15 % or more but not more than 35 % of wheat derived Maltodextrin,

—	15 % or more but not more than 35 % of whey (milk serum),

—	10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,

—	10 % or more but not more than 30 % of blended, aged spray dried cheese,

—	5 % or more but not more than 15 % of buttermilk and

—	0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid

0 %

-

31.12.2023

0.2423

ex 1902 30 10

ex 1903 00 00

10

20

Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale

0 %

-

31.12.2023

0.2866

ex 2005 91 00

10

Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg

0 %

-

31.12.2023

0.5884

ex 2007 99 50

ex 2007 99 93

83

93

10

Mango puree concentrate, obtained by cooking:

—	of the Genus Mangifera spp.,

—	with a sugar content by weight of not more than 30 %

for use in the manufacture of products of food and drink industry (1)

6 % (3)

-

31.12.2022

0.5875

ex 2007 99 50

84

94

Papaya puree concentrate, obtained by cooking:

—	of the Genus Carica spp.,

—	with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)

7,8 % (3)

-

31.12.2022

0.5867

ex 2007 99 50

85

95

Guava puree concentrate, obtained by cooking:

—	of the Genus Psidium spp.,

—	with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)

6 % (3)

-

31.12.2022

0.4716

ex 2008 93 91

20

Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (4)

0 %

-

31.12.2022

0.5004

ex 2008 99 48

94

Mango puree:

—	not from concentrate,

—	of the genus Mangifera,

—	of a Brix value of 14 or more, but not more than 20,

used in the manufacture of products of drink industry (1)

6 %

-

31.12.2022

0.4709

ex 2008 99 49

ex 2008 99 99

30

40

Seedless boysenberry puree not containing added spirit, whether or not containing added sugar

0 %

-

31.12.2025

0.5587

ex 2008 99 49

ex 2008 99 99

70

11

Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:

—	more than 6 % of salt concentration,

—	0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and

—	whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995

for use in the manufacture of stuffed vine leaves with rice (1)

0 %

-

31.12.2022

0.6723

ex 2008 99 91

20

Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking (1) (2)

0 % (3)

-

31.12.2025

0.7767

ex 2008 99 99

35

Frozen pulp from acai berries:

—	hydrated and pasteurised,

—	separated from the kernels by the addition of water,

—	with a Brix value of less than 6, and

—	with a sugar content of less than 5,6 %

0 %

-

31.12.2024

0.4992

ex 2009 41 92

ex 2009 41 99

20

70

Pineapple juice:

—	not from concentrate,

—	of the genus Ananas,

—	of a Brix value of 11 or more but not more than 16,

used in the manufacture of products of drink industry (1)

8 %

-

31.12.2025

0.4664

ex 2009 49 30

91

Pineapple juice, other than in powder form:

—	with a Brix value of more than 20 but not more than 67,

—	a value of more than EUR 30 per 100 kg net weight,

—	containing added sugar

used in the manufacture of products of food or drink industry (1)

0 %

-

31.12.2024

0.4623

ex 2009 81 31

10

Cranberry juice concentrate:

—	of a Brix value of 40 or more but not more than 66,

—	in immediate packings of a content of 50 litres or more

0 %

l

31.12.2024

0.6356

ex 2009 89 73

11

13

Passion fruit juice and passion fruit juice concentrate, whether or not frozen:

—	with a Brix value of 13,7 or more but not more than 55,

—	of a value of more than EUR 30 per 100 kg net weight,

—	in immediate packings of a content of 50 litres or more, and

—	with added sugar

for the use in the manufacture of products of food or drink industry (1)

0 %

l

31.12.2024

0.4159

ex 2009 89 79

20

Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more

0 %

l

31.12.2023

0.6050

ex 2009 89 79

30

Frozen acerola juice concentrate :

—	with a Brix value of more than 48 but not more than 67,

—	in immediate packings of a content of 50 litres or more

0 %

l

31.12.2023

0.5206

ex 2009 89 79

85

Acai berry juice concentrate:

—	of the species Euterpe oleracea,

—

frozen,

—	not sweetened,

—	not in powder form,

—	of a Brix value of 23 or more but not more than 32,

in immediate packings of a content of 10 kg or more

0 %

-

31.12.2026

0.6365

ex 2009 89 97

21

29

Passion fruit juice and passion fruit juice concentrate, whether or not frozen:

—	with a Brix value of 10 or more but not more than 13,7,

—	of a value of more than EUR 30 per 100 kg net weight,

—	in immediate packings of a content of 50 litres or more, and

—	without added sugar

for the use in the manufacture of products of food or drink industry (1)

0 %

l

31.12.2024

0.4157

ex 2009 89 99

96

Coconut water

—	unfermented,

—	not containing added spirit or sugar, and

—	in immediate packing of a content of 20 litres or more (2)

0 %

l

31.12.2026

0.6152

ex 2106 10 20

20

Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form

0 %

-

31.12.2023

0.3340

ex 2106 10 20

30

Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate

0 %

-

31.12.2023

0.7284

ex 2106 90 92

50

Casein protein hydrolysate consisting of:

—	by weight 20 % or more but not more than 70 % free amino acids, and

—	peptones of which by weight more than 90 % having a molecular weight of not more than 2 000 Da

0 %

-

31.12.2022

0.7435

ex 2106 90 98

47

Preparation, having a moisture content of 1 % or more but not more than 4 %, and containing by weight:

—	15 % or more but not more than 35 % of buttermilk,

—	20 % (±10 %) of lactose,

—	20 % (±10 %) of whey protein concentrate,

—	15 % (±10 %) of cheddar cheese,

—	3 % (±2 %) of salt,

—	0,1 % or more but not more than 10 % of lactic acid E270,

—	0,1 % or more but not more than 10 % of gum arabic E414

for use in the manufacture of products of food and drink industry (1)

0 %

-

31.12.2022

0.5246

ex 2519 90 10

10

Fused magnesia with a purity by weight of 94 % or more

0 %

-

31.12.2026

0.6330

ex 2707 50 00

ex 2707 99 80

20

10

Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %

0 %

-

31.12.2024

0.6168

ex 2707 99 99

10

Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 (1)

0 %

-

31.12.2023

0.8144

ex 2710 12 25

20

Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:

—	a specific gravity of 0,666 or more but not more than 0,686,

—	a total of carbonyl compounds of less than 1 ppm,

—	a total of acetylenic compounds of less than 2 ppm

0 %

-

31.12.2025

0.7823

ex 2710 19 81

ex 2710 19 99

30

50

Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:

—	90 % or more by weight of saturates, and

—	not more than 0,03 % by weight of sulphur,

and with

—	a viscosity index of 80 or more, but less than 120, and

—	a kinematic viscosity less than 5,0 cSt at 100°C or more than 13,0 cSt at 100°C

0 %

-

31.12.2023

0.7822

ex 2710 19 81

ex 2710 19 99

40

60

Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:

—	90 % or more by weight of saturates, and

—	not more than 0,03 % by weight of sulphur,

with a viscosity index of 120 or more

0 %

-

31.12.2024

0.6495

ex 2710 19 99

20

Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:

—	not more than 1 mg/kg of sulphur

—	more than 99 % by weight of saturated hydrocarbons

—	more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and

—	a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or

—	a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more

0 %

-

31.12.2024

0.7393

ex 2712 90 99

10

Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms

0 %

-

31.12.2022

0.4531

ex 2804 50 90

40

Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis

0 %

-

31.12.2023

0.8021

2804 70 10

Red phosphorus

0 %

-

31.12.2022

0.8022

2804 70 90

Phosphorus, other than red phosphorus

0 %

-

31.12.2023

0.6658

ex 2805 12 00

10

Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)

0 %

-

31.12.2025

0.5609

ex 2805 19 90

20

Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more

0 %

-

31.12.2022

0.2559

ex 2805 30 10

10

Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium

0 %

-

31.12.2023

0.497

2805 30 20

2805 30 30

2805 30 40

Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7769

ex 2809 20 00

10

Aqueous solution of phosphoric acid (CAS RN 7664-38-2), containing by weight 85 % or more phosphoric acid

0 %

-

31.12.2024

0.2407

ex 2811 22 00

10

Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

0 %

-

31.12.2023

0.6836

ex 2811 22 00

15

Amorphous silicon dioxide (CAS RN 60676-86-0)

—	in the form of powder

—	of a purity by weight of 99,0 % or more

—	with a median grain size of 0,7 μm or more, but not more than 2,1 μm

—	where 70 % of the particles have a diameter of not more than 3 μm

0 %

-

31.12.2022

0.7292

ex 2811 29 90

10

Tellurium dioxide (CAS RN 7446-07-3)

0 %

-

31.12.2022

0.3308

ex 2812 90 00

10

Nitrogen trifluoride (CAS RN 7783-54-2)

0 %

-

31.12.2023

0.5747

ex 2816 40 00

10

Barium hydroxide (CAS RN 17194-00-2)

0 %

-

31.12.2022

0.7594

ex 2818 10 11

10

Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0

0 %

-

31.12.2023

0.5110

ex 2818 10 91

20

Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:

—	94 % or more, but less than 98,5 % of aluminium oxide,

—	2 % (± 1,5 %) of magnesium oxide,

—	1 % (± 0,6 %) of yttrium oxide,

and

—	either 2 % (± 1,2 %) of lanthanum oxide, or

—	2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

with less than 50 % of the total weight having a particle size of more than 10 mm

0 %

-

31.12.2025

0.4640

ex 2818 20 00

10

Activated alumina with a specific surface area of at least 350 m2/g

0 %

-

31.12.2024

0.6837

ex 2818 30 00

20

Aluminium hydroxide (CAS RN 21645-51-2)

—	in the form of powder,

—	with a purity by weight of 99,5 % or more,

—	with a decomposition point of 263°C or more,

—	with a particle size of 4 μm (± 1 μm),

—	with a Total-Na2O-content by weight of not more than 0,06 %

0 %

-

31.12.2025

0.3306

ex 2818 30 00

30

Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)

0 %

-

31.12.2023

0.5369

ex 2819 90 90

10

Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy (1)

0 %

-

31.12.2026

0.5752

ex 2823 00 00

10

Titanium dioxide (CAS RN 13463-67-7):

—	of a purity by weight of 99,9 % or more,

—	with an average grain-size of 0,7 μm or more but not more than 2,1 μm

0 %

-

31.12.2022

0.5576

ex 2825 10 00

10

Hydroxylammonium chloride (CAS RN 5470-11-1)

0 %

-

31.12.2022

0.7897

ex 2825 20 00

10

Lithium hydroxide monohydrate (CAS RN 1310-66-3)

2,6 %

-

31.12.2022

0.3800

2825 30 00

Vanadium oxides and hydroxides

0 %

-

31.12.2026

0.3303

ex 2825 50 00

20

Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride

0 %

-

31.12.2023

0.6819

ex 2825 50 00

30

Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm

0 %

-

31.12.2025

0.5555

ex 2825 60 00

10

Zirconium dioxide (CAS RN 1314-23-4)

0 %

-

31.12.2022

0.6980

ex 2825 70 00

10

Molybdenum trioxide (CAS RN 1313-27-5)

0 %

-

31.12.2026

0.7193

ex 2825 70 00

20

Molybdic Acid (CAS RN 7782-91-4)

0 %

-

31.12.2026

0.5055

ex 2826 19 90

10

Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more

0 %

-

31.12.2025

0.2865

ex 2827 39 85

10

Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %

0 %

-

31.12.2023

0.4180

ex 2827 39 85

20

Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more

0 %

-

31.12.2026

0.6143

ex 2827 39 85

40

Barium chloride dihydrate (CAS RN 10326-27-9)

0 %

-

31.12.2023

0.4423

ex 2827 49 90

10

Hydrated zirconium dichloride oxide (CAS RN 7699-43-6)

0 %

-

31.12.2023

0.6463

ex 2827 60 00

10

Sodium iodide (CAS RN 7681-82-5)

0 %

-

31.12.2024

0.7596

ex 2828 10 00

10

Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more

0 %

-

31.12.2023

0.3302

ex 2830 10 00

10

Disodium tetrasulphide (CAS RN 12034-39-8), containing by weight 38 % or less of sodium calculated on the dry weight

0 %

-

31.12.2023

0.3859

ex 2833 29 80

20

Manganese sulphate monohydrate (CAS RN 10034-96-5)

0 %

-

31.12.2023

0.5090

ex 2833 29 80

30

Zirconium sulphate (CAS RN 14644-61-2)

0 %

-

31.12.2022

0.4338

ex 2835 10 00

10

Sodium hypophosphite monohydrate (CAS RN 10039-56-2)

0 %

-

31.12.2022

0.6144

ex 2835 10 00

20

Sodium hypophosphite (CAS RN 7681-53-0)

0 %

-

31.12.2023

0.7452

ex 2835 10 00

30

Aluminium Phosphinate (CAS RN 7784-22-7)

0 %

-

31.12.2023

0.2524

ex 2836 91 00

20

Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:

—	2 mg/kg or more of arsenic,

—	200 mg/kg or more of calcium,

—	200 mg/kg or more of chlorides,

—	20 mg/kg or more of iron,

—	150 mg/kg or more of magnesium,

—	20 mg/kg or more of heavy metals,

—	300 mg/kg or more of potassium,

—	300 mg/kg or more of sodium,

—	200 mg/kg or more of sulphates,

determined according to the methods specified in the European Pharmacopœia

0 %

-

31.12.2023

0.2863

ex 2836 99 17

30

Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more

0 %

-

31.12.2023

0.3300

ex 2837 19 00

20

Copper cyanide (CAS RN 544-92-3)

0 %

-

31.12.2023

0.4078

ex 2837 20 00

10

Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)

0 %

-

31.12.2026

0.4339

ex 2839 19 00

10

Disodium disilicate (CAS RN 13870-28-5)

0 %

-

31.12.2022

0.2861

ex 2839 90 00

20

Calcium silicate (CAS RN 1344-95-2)

0 %

-

31.12.2023

0.6632

ex 2840 20 90

10

Zinc borate (CAS RN 12767-90-7)

0 %

-

31.12.2025

0.7288

ex 2841 50 00

11

Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more, for use as intermediate for the production of chrome (1)

2 %

-

31.12.2025

0.6142

ex 2841 70 00

10

Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)

0 %

-

31.12.2023

0.6482

ex 2841 70 00

30

Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)

0 %

-

31.12.2024

0.6981

ex 2841 70 00

40

Diammonium dimolybdate (CAS RN 27546-07-2)

0 %

-

31.12.2026

0.4323

ex 2841 80 00

10

Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)

0 %

-

31.12.2022

0.7301

ex 2841 90 30

10

Potassium metavanadate (CAS RN 13769-43-2)

0 %

-

31.12.2022

0.4222

ex 2841 90 85

10

Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %

2,7 %

-

31.12.2022

0.5936

ex 2841 90 85

20

Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more

0 %

-

31.12.2023

0.4416

ex 2842 10 00

10

Synthetic beta zeolite powder

0 %

-

31.12.2023

0.4588

ex 2842 10 00

20

Synthetic chabasite zeolite powder

0 %

-

31.12.2024

0.7397

ex 2842 10 00

50

Fluorphlogopite (CAS RN 12003-38-2)

0 %

-

31.12.2022

0.7097

ex 2842 10 00

60

Aluminosilicate (CAS RN 1318-02-1) with

—	a purity by weight of 94 % or more,

—	a zeolite structure of aluminophosphate-eighteen (AEI), and

—	a phase purity of 90 % or more

for use in the manufacture of copper zeolite (1)

0 %

-

31.12.2026

0.4642

ex 2842 90 10

10

Sodium selenate (CAS RN 13410-01-0)

0 %

-

31.12.2024

0.7400

ex 2842 90 80

30

Aluminum trititanium dodecachloride (CAS RN 12003-13-3)

0 %

-

31.12.2022

0.3295

2845 10 00

Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)

0 %

-

31.12.2023

0.4189

2845 40 00

Helium-3 (CAS RN 14762-55-1)

0 %

-

31.12.2026

0.3297

2845 90 10

Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)

0 %

-

31.12.2023

0.4191

ex 2845 90 90

20

Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)

0 %

-

31.12.2023

0.4190

ex 2845 90 90

30

(13C)Carbon monoxide (CAS RN 1641-69-6)

0 %

-

31.12.2026

0.2859

ex 2846 10 00

ex 3824 99 96

10

53

Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight

0 %

-

31.12.2023

0.3296

ex 2846 10 00

20

Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated

0 %

-

31.12.2023

0.3420

ex 2846 10 00

30

Cerium lanthanum carbonate, whether or not hydrated

0 %

-

31.12.2023

0.3227

2846 90 10

2846 90 20

2846 90 30

2846 90 90

Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00

0 %

-

31.12.2023

0.3418

ex 2850 00 20

10

Silane (CAS RN 7803-62-5)

0 %

-

31.12.2023

0.4332

ex 2850 00 20

30

Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm

0 %

-

31.12.2022

0.5497

ex 2850 00 20

40

Germanium tetrahydride (CAS RN 7782-65-2)

0 %

-

31.12.2026

0.7302

ex 2850 00 20

60

Disilane (CAS RN 1590-87-0)

0 %

-

31.12.2022

0.7555

ex 2850 00 20

70

Cubic Boron nitride (CAS RN 10043-11-5)

0 %

-

31.12.2023

0.3419

ex 2850 00 20

80

Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more

0 %

-

31.12.2024

0.4492

ex 2850 00 60

10

Sodium azide (CAS RN 26628-22-8)

0 %

-

31.12.2023

0.3421

ex 2853 90 90

20

Phosphine (CAS RN 7803-51-2)

0 %

-

31.12.2023

0.6633

2903 42 00

Difluoromethane (CAS RN 75-10-5)

0 %

-

31.12.2025

0.6007

ex 2903 44 00

10

Pentafluoroethane (CAS RN 354-33-6)

0 %

-

31.12.2024

0.3674

ex 2903 45 00

30

1,1,1,2-Tetrafluoroethane (CAS RN 811-97-2) conforming to the following specifications:

—	not more than 600 ppm by weight of HFC-134 (1,1,2,2-tetrafluoroethane),

—	not more than 5 ppm by weight of HFC-143a (1,1,1-trifluoroethane),

—	not more than 2 ppm by weight of HFC-125 (pentafluoroethane),

—	not more than 100 ppm by weight of HCFC-124 (1-chloro-1,2,2,2- tetrafluoroethane),

—	not more than 30 ppm by weight of CFC-114 (1,2-dichlorotetrafluoroethane),

—	not more than 50 ppm by weight of CFC-114a (1,1-dichlorotetrafluoroethane),

—	not more than 250 ppm by weight of HCFC-133a (1-chloro-2,2,2-trifluoroethane),

—	not more than 2 ppm by weight of HCFC-22 (chlorodifluoromethane),

—	not more than 2 ppm by weight of CFC-115 (chloropentafluoroethane),

—	not more than 2 ppm by weight of CFC-12 (dichlorodifluoromethane),

0 %

-

31.12.2024

—	not more than 20 ppm by weight of HCC-40 (methyl chloride),

—	not more than 20 ppm by weight of HFC-245cb (1,1,1,2,2-pentafluoropropane),

—	not more than 20 ppm by weight of H-12B1 (chlorodifluorobromomethane),

—	not more than 20 ppm by weight of HFC-32 (difluoromethane),

—	not more than 15 ppm by weight of HCFC-31 (chlorofluoromethane),

—	not more than 10 ppm by weight of HFC-152a (1,1-difluoroethane),

—	not more than 20 ppm by weight of HFO-1131 (1-chloro-2-fluoroethylene),

—	not more than 20 ppm by weight of HCFO-1122 (1-chloro-2,2-difluoroethylene),

—	not more than 3 ppm by weight of HFO-1234yf (2,3,3,3-tetrafluoropropene),

—	not more than 3 ppm by weight of HFO-1243zf (3,3,3-trifluoropropene),

—	not more than 3 ppm by weight of HCFO-1122a (1-chloro-1,2-difluoroethylene),

—	not more than 4,5 ppm by weight of HFO-1234yf + HCFO-1122a + HFO-1243zf (2,3,3,3-tetrafluoropropene + 1-chloro-1,2-difluoroethylene + 3,3,3-trifluoropropene),

—	not more than 3 ppm by weight of any individual unspecified/unknown chemical,

—	not more than 10 ppm by weight of all unspecified/unknown chemicals combined,

—	not more than 10 ppm by weight of water,

—	with an acidity level of not more than 0,1 ppm by weight,

—	without halides,

—	not more than 0,01 % by volume of high boilers,

—	without any odour (no malodour),

for use with or without further purification as an under GMP (Good Manufacturing Practice) produced inhalation grade of HFC-134a in the manufacture of a propellant for medical aerosols whose contents are absorbed in the oral or nasal cavities, and/or the respiratory tract (1)

0.2542

ex 2903 47 00

10

1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)

0 %

-

31.12.2023

0.6077

ex 2903 49 30

30

1H-Perfluorohexane (CAS RN 355-37-3)

0 %

-

31.12.2023

0.2854

ex 2903 49 30

10

Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)

0 %

-

31.12.2023

0.2852

ex 2903 49 30

20

Perfluoroethane (CAS RN 76-16-4)

0 %

-

31.12.2023

0.5803

ex 2903 51 00

10

2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)

0 %

-

31.12.2022

0.4517

ex 2903 51 00

20

Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)

0 %

-

31.12.2023

0.6076

ex 2903 59 00

20

(Perfluorobutyl) ethylene (CAS RN 19430-93-4)

0 %

-

31.12.2023

0.4066

ex 2903 59 00

30

Hexafluoropropene (CAS RN 116-15-4)

0 %

-

31.12.2026

0.7324

ex 2903 59 00

40

1,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2)

0 %

-

31.12.2022

0.8151

ex 2903 69 19

60

1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.7289

ex 2903 69 19

20

5-Bromopent-1-ene (CAS RN 1119-51-3)

0 %

-

31.12.2022

0.7974

ex 2903 69 19

40

3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7895

ex 2903 72 00

10

Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.3675

ex 2903 77 60

10

1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)

0 %

-

31.12.2023

0.5212

ex 2903 77 90

10

Chlorotrifluoroethylene (CAS RN 79-38-9)

0 %

-

31.12.2026

0.7513

ex 2903 78 00

10

Octafluoro-1,4-diiodobutane (CAS RN 375-50-8)

0 %

-

31.12.2023

0.7755

ex 2903 78 00

20

Trifluoroiodomethane (CAS RN 2314-97-8)

0 %

-

31.12.2024

0.6485

ex 2903 79 30

10

Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)

0 %

-

31.12.2024

0.7826

ex 2903 79 30

30

1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.5765

ex 2903 89 80

50

Chlorocyclopentane (CAS RN 930-28-9)

0 %

-

31.12.2022

0.7304

ex 2903 89 80

60

Octafluorocyclobutane (CAS RN 115-25-3)

0 %

-

31.12.2022

0.6611

ex 2903 99 80

15

4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)

0 %

-

31.12.2025

0.3410

ex 2903 99 80

20

1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)

0 %

-

31.12.2023

0.8017

ex 2903 99 80

25

2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8018

ex 2903 99 80

35

2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.3411

ex 2903 99 80

40

2,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and containing:

—	0,001 mg/kg or less of tetrachlorodibenzodioxines,

—	0,001 mg/kg or less of tetrachlorodibenzofurans,

—	0,2 mg/kg or less of tetrachlorobiphenyls

0 %

-

31.12.2023

0.8076

ex 2903 99 80

45

1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.4529

ex 2903 99 80

50

Fluorobenzene (CAS RN 462-06-6)

0 %

-

31.12.2023

0.8101

ex 2903 99 80

55

1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7351

ex 2903 99 80

60

1,1'-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1)

0 %

-

31.12.2022

0.8166

ex 2903 99 80

65

2,6-Difluorobenzyl bromide (CAS RN 85118-00-9) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.8177

ex 2903 99 80

70

1-[Chloro(phenyl)methyl]-2-methylbenzene (CAS RN 41870-52-4) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.6235

ex 2903 99 80

75

3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)

0 %

-

31.12.2024

0.5917

ex 2903 99 80

80

1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)

0 %

-

31.12.2023

0.3407

ex 2904 10 00

30

Sodium p-styrenesulphonate (CAS RN 2695-37-6)

0 %

-

31.12.2024

0.4686

ex 2904 10 00

50

Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)

0 %

-

31.12.2024

0.3409

ex 2904 20 00

10

Nitromethane (CAS RN 75-52-5)

0 %

-

31.12.2025

0.3391

ex 2904 20 00

20

Nitroethane (CAS RN 79-24-3)

0 %

-

31.12.2022

0.3408

ex 2904 20 00

30

1-Nitropropane (CAS RN 108-03-2)

0 %

-

31.12.2025

0.3390

ex 2904 20 00

40

2-Nitropropane (CAS RN 79-46-9)

0 %

-

31.12.2024

0.2526

ex 2904 99 00

20

1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)

0 %

-

31.12.2024

0.6612

ex 2904 99 00

25

Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)

0 %

-

31.12.2025

0.3388

ex 2904 99 00

30

Tosyl chloride (CAS RN 98-59-9)

0 %

-

31.12.2024

0.6613

ex 2904 99 00

35

1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)

0 %

-

31.12.2025

0.5745

ex 2904 99 00

40

4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)

0 %

-

31.12.2022

0.7507

ex 2904 99 00

45

2-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4)

0 %

-

31.12.2023

0.6001

ex 2904 99 00

50

Ethanesulphonyl chloride (CAS RN 594-44-5)

0 %

-

31.12.2023

0.7957

ex 2904 99 00

55

2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.6407

ex 2904 99 00

60

4,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7)

0 %

-

31.12.2024

0.8160

ex 2904 99 00

65

4-Nitrotoluene-2-sulphonic acid (CAS RN 121-03-9) in powder form, with a purity by weight of 80 % or more and a content of water by weight of 15 % or more

0 %

-

31.12.2026

0.6270

ex 2904 99 00

70

1-Chloro-4-nitrobenzene (CAS RN 100-00-5)

0 %

-

31.12.2024

0.6560

ex 2904 99 00

80

1-Chloro-2-nitrobenzene (CAS RN 88-73-3)

0 %

-

31.12.2024

0.6186

ex 2905 11 00

10

Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more

0 %

-

31.12.2023

0.2967

ex 2905 19 00

11

Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN

0 %

-

31.12.2023

0.6118

ex 2905 19 00

20

Butyltitanate monohydrate, homopolymer (CAS RN 162303-51-7)

0 %

-

31.12.2023

0.6119

ex 2905 19 00

25

Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)

0 %

-

31.12.2023

0.3384

ex 2905 19 00

30

2,6-Dimethylheptan-4-ol (CAS RN 108-82-7)

0 %

-

31.12.2023

0.4793

ex 2905 19 00

40

2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)

0 %

-

31.12.2024

0.5534

ex 2905 19 00

70

Titanium tetrabutanolate (CAS RN 5593-70-4)

0 %

-

31.12.2022

0.5533

ex 2905 19 00

80

Titanium tetraisopropoxide (CAS RN 546-68-9)

0 %

-

31.12.2022

0.6002

ex 2905 19 00

85

Titanium tetraethanolate (CAS RN 3087-36-3)

0 %

-

31.12.2023

0.6464

ex 2905 22 00

10

Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)

0 %

-

31.12.2024

0.7114

ex 2905 22 00

20

3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)

0 %

-

31.12.2026

0.7388

ex 2905 29 90

10

Cis-hex-3-en-1-ol (CAS RN 928-96-1)

0 %

-

31.12.2022

0.7674

ex 2905 32 00

20

(2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more

0 %

-

31.12.2023

0.4934

ex 2905 39 95

10

Propane-1,3-diol (CAS RN 504-63-2)

0 %

-

31.12.2025

0.5249

ex 2905 39 95

20

Butane-1,2-diol (CAS RN 584-03-2)

0 %

-

31.12.2022

0.5255

ex 2905 39 95

30

2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)

0 %

-

31.12.2026

0.5847

ex 2905 39 95

40

Decane-1,10-diol (CAS RN 112-47-0)

0 %

-

31.12.2022

0.5908

ex 2905 39 95

50

2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)

0 %

-

31.12.2023

0.7701

ex 2905 39 95

60

Dodecane-1,12-diol (CAS RN 5675-51-4)

0 %

-

31.12.2024

0.7914

ex 2905 39 95

70

2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.4624

ex 2905 59 98

20

2,2,2-Trifluoroethanol (CAS RN 75-89-8)

0 %

-

31.12.2024

0.3378

ex 2906 19 00

10

Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)

0 %

-

31.12.2023

0.3380

ex 2906 19 00

20

4,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6)

0 %

-

31.12.2023

0.6257

ex 2906 19 00

50

4-tert-Butylcyclohexanol (CAS RN 98-52-2)

0 %

-

31.12.2024

0.8231

ex 2906 19 00

60

5-Methyl-2-(prop-1-en-2-yl)cyclohexanol, mixture of isomers (CAS RN 7786-67-6) with a purity by weight of 90 % or more

0 %

-

31.12.2026

0.3681

ex 2906 29 00

20

1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)

0 %

-

31.12.2023

0.5855

ex 2906 29 00

30

2-Phenylethanol (CAS RN 60-12-8)

0 %

-

31.12.2022

0.6757

ex 2906 29 00

40

2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)

0 %

-

31.12.2022

0.7373

ex 2906 29 00

50

2,2'-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5)

0 %

-

31.12.2022

0.7806

ex 2906 29 00

60

3-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573-45-2)

0 %

-

31.12.2024

0.7963

ex 2906 29 00

70

1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.6329

ex 2907 12 00

20

Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.6559

ex 2907 12 00

30

p-Cresol (CAS RN 106-44-5)

0 %

-

31.12.2024

0.5216

ex 2907 15 90

10

2-Naphthol (CAS RN 135-19-3)

0 %

-

31.12.2026

0.6256

ex 2907 19 10

10

2,6-Xylenol (CAS RN 576-26-1)

0 %

-

31.12.2024

0.4480

ex 2907 19 90

20

Biphenyl-4-ol (CAS RN 92-69-3)

0 %

-

31.12.2023

0.7753

ex 2907 19 90

30

2-methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2)

0 %

-

31.12.2024

0.3372

ex 2907 21 00

10

Resorcinol (CAS RN 108-46-3)

0 %

-

31.12.2023

0.6026

ex 2907 29 00

15

6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9)

0 %

-

31.12.2023

0.3369

ex 2907 29 00

20

4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)

0 %

-

31.12.2023

0.6454

ex 2907 29 00

25

4-Hydroxybenzyl alcohol (CAS RN 623-05-2)

0 %

-

31.12.2024

0.3367

ex 2907 29 00

30

4,4',4"-Ethylidynetriphenol (CAS RN 27955-94-8)

0 %

-

31.12.2023

0.5432

ex 2907 29 00

45

2-Methylhydroquinone (CAS RN 95-71-6)

0 %

-

31.12.2026

0.3368

ex 2907 29 00

50

6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)

0 %

-

31.12.2023

0.6558

ex 2907 29 00

65

2,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)

0 %

-

31.12.2024

0.2584

ex 2907 29 00

70

2,2',2",6,6',6"-Hexa-tert-butyl-α,α',α"-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)

0 %

-

31.12.2023

0.7402

ex 2907 29 00

75

Biphenyl-4,4'-diol (CAS RN 92-88-6)

0 %

-

31.12.2023

0.3848

ex 2907 29 00

85

Phloroglucinol whether or not hydrated

0 %

-

31.12.2023

0.5903

ex 2908 19 00

10

Pentafluorophenol (CAS RN 771-61-9)

0 %

-

31.12.2023

0.5914

ex 2908 19 00

20

4,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)

0 %

-

31.12.2023

0.6260

ex 2908 19 00

30

4-Chlorophenol (CAS RN 106-48-9)

0 %

-

31.12.2024

0.6782

ex 2908 19 00

40

3,4,5-Trifluorophenol (CAS RN 99627-05-1)

0 %

-

31.12.2025

0.6915

ex 2908 19 00

50

4-Fluorophenol (CAS RN 371-41-5)

0 %

-

31.12.2025

0.7720

ex 2908 19 00

60

2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS RN 79-94-7)

0 %

-

31.12.2024

0.8204

ex 2908 19 00

70

2,3,6-Trifluorophenol (CAS RN 113798-74-6) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.3361

ex 2909 19 90

20

Bis(2-chloroethyl) ether (CAS RN 111-44-4)

0 %

-

31.12.2023

0.3359

ex 2909 19 90

30

Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more

0 %

-

31.12.2023

0.4035

ex 2909 19 90

50

3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)

0 %

-

31.12.2026

0.5407

ex 2909 20 00

10

8-Methoxycedrane (CAS RN 19870-74-7)

0 %

-

31.12.2026

0.5503

ex 2909 30 38

20

1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)

0 %

-

31.12.2026

0.6649

ex 2909 30 38

30

1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)

0 %

-

31.12.2025

0.7454

ex 2909 30 38

40

4-Benzyloxybromobenzene (CAS RN 6793-92-6)

0 %

-

31.12.2023

0.7828

ex 2909 30 38

50

2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.4710

ex 2909 30 90

10

2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)

0 %

-

31.12.2024

0.7176

ex 2909 30 90

15

{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)

0 %

-

31.12.2026

0.4711

ex 2909 30 90

20

1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)

0 %

-

31.12.2024

0.7115

ex 2909 30 90

25

1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane

0 %

-

31.12.2026

0.5117

ex 2909 30 90

30

3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)

0 %

-

31.12.2025

0.7580

ex 2909 30 90

35

1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738-29-9)

0 %

-

31.12.2023

0.6614

ex 2909 30 90

40

1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)

0 %

-

31.12.2025

0.8167

ex 2909 30 90

45

5-Bromo-1,3-difluoro-2-(trifluoromethoxy)benzene (CAS RN 115467-07-7) with a purity by weight of 95 % or more

0 %

-

31.12.2026

0.6783

ex 2909 30 90

50

1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)

0 %

-

31.12.2025

0.6784

ex 2909 30 90

60

1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)

0 %

-

31.12.2025

0.6994

ex 2909 30 90

70

O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)

0 %

-

31.12.2026

0.7079

ex 2909 30 90

80

Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more

0 %

-

31.12.2022

0.7706

ex 2909 44 00

10

2-Propoxyethanol (CAS RN 2807-30-9)

0 %

-

31.12.2024

0.6927

ex 2909 49 80

10

1-Propoxypropan-2-ol (CAS RN 1569-01-3)

0 %

-

31.12.2026

0.3484

ex 2909 50 00

10

4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)

0 %

-

31.12.2023

0.7846

ex 2909 50 00

40

2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.3682

ex 2909 60 90

10

Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)

0 %

-

31.12.2023

0.6489

ex 2909 60 90

30

3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons

0 %

-

31.12.2024

0.7910

ex 2909 60 90

50

Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes

0 %

-

31.12.2024

0.7744

ex 2910 90 00

10

2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)

0 %

-

31.12.2024

0.5940

ex 2910 90 00

15

1,2-Epoxycyclohexane (CAS RN 286-20-4)

0 %

-

31.12.2023

0.7672

ex 2910 90 00

25

Phenyloxirane (CAS RN 96-09-3)

0 %

-

31.12.2023

0.2649

ex 2910 90 00

30

2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)

0 %

-

31.12.2023

0.8042

ex 2910 90 00

40

[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.6660

ex 2910 90 00

50

2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)

0 %

-

31.12.2025

0.4361

ex 2910 90 00

80

Allyl glycidyl ether (CAS RN 106-92-3)

0 %

-

31.12.2026

0.7116

ex 2912 19 00

10

Undecanal (CAS RN 112-44-7)

0 %

-

31.12.2026

0.8073

ex 2912 19 00

20

Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.6968

ex 2912 29 00

15

2,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)

0 %

-

31.12.2026

0.7314

ex 2912 29 00

35

Cinnamaldehyde (CAS RN 104-55-2)

0 %

-

31.12.2022

0.7405

ex 2912 29 00

45

p-Phenylbenzaldehyde (CAS RN 3218-36-8)

0 %

-

31.12.2022

0.5755

ex 2912 29 00

50

4-Isobutylbenzaldehyde (CAS RN 40150-98-9)

0 %

-

31.12.2023

0.7612

ex 2912 29 00

55

Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5)

0 %

-

31.12.2023

0.6072

ex 2912 29 00

70

4-tert-Butylbenzaldehyde (CAS RN 939-97-9)

0 %

-

31.12.2023

0.6073

ex 2912 29 00

80

4-Isopropylbenzaldehyde (CAS RN 122-03-2)

0 %

-

31.12.2023

0.8147

2912 42 00

Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)

0 %

-

31.12.2025

0.3479

ex 2912 49 00

10

3-Phenoxybenzaldehyde (CAS RN 39515-51-0)

0 %

-

31.12.2023

0.5732

ex 2912 49 00

20

4-Hydroxybenzaldehyde (CAS RN 123-08-0)

0 %

-

31.12.2022

0.5135

ex 2912 49 00

30

Salicylaldehyde (CAS RN 90-02-8)

0 %

-

31.12.2025

0.6678

ex 2912 49 00

40

3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)

0 %

-

31.12.2025

0.7353

ex 2912 49 00

50

2,6-dihydroxybenzaldehyde (CAS RN 387-46-2)

0 %

-

31.12.2022

0.7712

ex 2913 00 00

10

2-Nitrobenzaldehyde (CAS RN 552-89-6)

0 %

-

31.12.2024

0.4228

ex 2914 19 90

20

Heptan-2-one (CAS RN 110-43-0)

0 %

-

31.12.2022

0.4274

ex 2914 19 90

30

3-Methylbutanone (CAS RN 563-80-4)

0 %

-

31.12.2022

0.4275

ex 2914 19 90

40

Pentan-2-one (CAS RN 107-87-9)

0 %

-

31.12.2022

0.7554

ex 2914 19 90

60

Zinc acetylacetonate (CAS RN 14024-63-6)

0 %

-

31.12.2023

0.7568

ex 2914 29 00

15

oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1)

0 %

-

31.12.2023

0.3475

ex 2914 29 00

20

Cyclohexadec-8-enone (CAS RN 3100-36–5)

0 %

-

31.12.2023

0.7450

ex 2914 29 00

25

Cyclohex-2-enone (CAS RN 930-68-7)

0 %

-

31.12.2023

0.4933

ex 2914 29 00

30

(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)

0 %

-

31.12.2025

0.8015

ex 2914 29 00

35

4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.3480

ex 2914 29 00

40

Camphor

0 %

-

31.12.2023

0.8058

ex 2914 29 00

45

4-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.5389

ex 2914 29 00

50

trans-β-Damascone (CAS RN 23726-91-2)

0 %

-

31.12.2022

0.7422

ex 2914 29 00

70

2-sec-butylcyclohexanone (CAS RN 14765-30-1)

0 %

-

31.12.2022

0.7389

ex 2914 29 00

80

1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)

0 %

-

31.12.2022

0.6265

ex 2914 39 00

15

2,6-Dimethyl-1-indanone (CAS RN 66309-83-9)

0 %

-

31.12.2024

0.6447

ex 2914 39 00

25

1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)

0 %

-

31.12.2024

0.4227

ex 2914 39 00

30

Benzophenone (CAS RN 119-61-9)

0 %

-

31.12.2022

0.4429

ex 2914 39 00

50

4-Phenylbenzophenone (CAS RN 2128-93-0)

0 %

-

31.12.2023

0.4428

ex 2914 39 00

60

4-Methylbenzophenone (CAS RN 134-84-9)

0 %

-

31.12.2023

0.5739

ex 2914 39 00

70

Benzil (CAS RN 134-81-6)

0 %

-

31.12.2022

0.5535

ex 2914 39 00

80

4'-Methylacetophenone (CAS RN 122-00-9)

0 %

-

31.12.2022

0.7824

ex 2914 50 00

15

1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.8168

ex 2914 50 00

18

4'-Hydroxyacetophenone (CAS RN 99-93-4) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.4932

ex 2914 50 00

20

3'-Hydroxyacetophenone (CAS RN 121-71-1)

0 %

-

31.12.2025

0.8179

ex 2914 50 00

23

1-[2-(Oxiran-2-ylmethoxy)phenyl]-3-phenylpropan-1-one (CAS RN 22525-95-7) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.5943

ex 2914 50 00

25

4'-Methoxyacetophenone (CAS RN 100-06-1)

0 %

-

31.12.2023

0.8195

ex 2914 50 00

28

1,1'-{(2-hydroxypropane-1,3-diyl)bis[oxy(6-hydroxybenzene-2,1-diyl)]}diethanone (CAS RN 16150-44-0) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.7797

ex 2914 50 00

35

2-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one (CAS-RN 71868-15-0)

0 %

-

31.12.2024

0.5904

ex 2914 50 00

36

2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)

0 %

-

31.12.2023

0.5435

ex 2914 50 00

40

4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)

0 %

-

31.12.2026

0.5809

ex 2914 50 00

45

3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)

0 %

-

31.12.2022

0.4235

ex 2914 50 00

60

2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)

0 %

-

31.12.2022

0.6762

ex 2914 50 00

75

7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)

0 %

-

31.12.2022

0.4385

ex 2914 50 00

80

2',6'-Dihydroxyacetophenone (CAS RN 699-83-2)

0 %

-

31.12.2023

0.2647

ex 2914 69 80

10

2-Ethylanthraquinone (CAS RN 84-51-5)

0 %

-

31.12.2023

0.2643

ex 2914 69 80

30

1,4-Dihydroxyanthraquinone (CAS RN 81-64-1)

0 %

-

31.12.2023

0.5430

ex 2914 69 80

40

p-Benzoquinone (CAS RN 106-51-4)

0 %

-

31.12.2023

0.6481

ex 2914 69 80

50

Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)

0 %

-

31.12.2024

0.7736

ex 2914 79 00

18

2-Chloro-1-cyclopropylethanone (CAS RN 7379-14-8)

0 %

-

31.12.2024

0.5782

ex 2914 79 00

20

2,4'-Difluorobenzophenone (CAS RN 342-25-6)

0 %

-

31.12.2022

0.7732

ex 2914 79 00

23

5-Chloro-2-hydroxybenzophenone (CAS RN 85-19-8)

0 %

-

31.12.2024

0.7751

ex 2914 79 00

27

(2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2)

0 %

-

31.12.2024

0.7467

ex 2914 79 00

30

5-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)

0 %

-

31.12.2023

0.7442

ex 2914 79 00

35

1-[4-(benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9)

0 %

-

31.12.2023

0.3474

ex 2914 79 00

40

Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)

0 %

-

31.12.2023

0.2640

ex 2914 79 00

50

3'-Chloropropiophenone (CAS RN 34841-35-5)

0 %

-

31.12.2023

0.4948

ex 2914 79 00

60

4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)

0 %

-

31.12.2026

0.5237

ex 2914 79 00

70

4-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3)

0 %

-

31.12.2026

0.6120

ex 2914 79 00

80

Tetrachloro-p-benzoquinone (CAS RN 118-75-2)

0 %

-

31.12.2023

0.7955

ex 2915 24 00

10

Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7433

ex 2915 39 00

10

Cis-3-hexenyl acetate (CAS RN 3681-71-8)

0 %

-

31.12.2022

0.6155

ex 2915 39 00

25

2-Methylcyclohexyl acetate (CAS RN 5726-19-2)

0 %

-

31.12.2023

0.7423

ex 2915 39 00

30

4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4)

0 %

-

31.12.2022

0.2957

ex 2915 39 00

40

tert-Butyl acetate (CAS RN 540-88-5)

0 %

-

31.12.2023

0.5119

ex 2915 39 00

60

Dodec-8-enyl acetate (CAS RN 28079-04-1)

0 %

-

31.12.2025

0.5121

ex 2915 39 00

65

Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)

0 %

-

31.12.2025

0.5120

ex 2915 39 00

70

Dodec-9-enyl acetate (CAS RN 16974-11-1)

0 %

-

31.12.2025

0.5289

ex 2915 39 00

75

Isobornyl acetate (CAS RN 125-12-2)

0 %

-

31.12.2026

0.5301

ex 2915 39 00

80

1-Phenylethyl acetate (CAS RN 93-92-5)

0 %

-

31.12.2026

0.5909

ex 2915 39 00

85

2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)

0 %

-

31.12.2023

0.7834

ex 2915 40 00

10

Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7830

ex 2915 40 00

20

Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.5858

ex 2915 60 19

10

Ethyl butyrate (CAS RN 105-54-4)

0 %

-

31.12.2022

0.7540

ex 2915 70 40

10

Methyl palmitate (CAS RN 112-39-0)

0 %

-

31.12.2023

0.7541

ex 2915 90 30

10

Methyl laurate (CAS RN 111-82-0)

0 %

-

31.12.2025

0.7899

ex 2915 90 70

18

Myristic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7407

ex 2915 90 70

20

Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)

0 %

-

31.12.2022

0.8146

ex 2915 90 70

23

Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7542

ex 2915 90 70

25

Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)

0 %

-

31.12.2023

0.6003

ex 2915 90 70

27

Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more

0 %

-

31.12.2023

0.5767

ex 2915 90 70

30

3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)

0 %

-

31.12.2022

0.8154

ex 2915 90 70

33

Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.5536

ex 2915 90 70

35

2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)

0 %

-

31.12.2023

0.6255

ex 2915 90 70

45

Trimethyl orthoformate (CAS RN 149-73-5)

0 %

-

31.12.2024

0.4791

ex 2915 90 70

50

Allyl heptanoate (CAS RN 142-19-8)

0 %

-

31.12.2024

0.4954

ex 2915 90 70

60

Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)

0 %

-

31.12.2025

0.2585

ex 2916 12 00

10

2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)

0 %

-

31.12.2023

0.3977

ex 2916 12 00

40

2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)

0 %

-

31.12.2023

0.5808

ex 2916 12 00

70

2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)

0 %

-

31.12.2022

0.3466

ex 2916 13 00

30

Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities

0 %

-

31.12.2025

0.3468

ex 2916 13 00

40

Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser

0 %

-

31.12.2023

0.2638

ex 2916 14 00

10

2,3-Epoxypropyl methacrylate (CAS RN 106-91-2)

0 %

-

31.12.2023

0.6190

ex 2916 14 00

20

Ethyl methacrylate (CAS RN 97-63-2)

0 %

-

31.12.2023

0.2951

ex 2916 19 95

20

Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)

0 %

-

31.12.2023

0.5991

ex 2916 19 95

40

Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds (1)

0 %

-

31.12.2023

0.6238

ex 2916 19 95

50

Methyl 2-fluoroacrylate (CAS RN 2343-89-7)

0 %

-

31.12.2024

0.7980

ex 2916 19 95

60

Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)

0 %

-

31.12.2025

0.7940

ex 2916 19 95

70

Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more

0 %

-

31.12.2025

0.7023

ex 2916 20 00

15

Transfluthrin (ISO) (CAS RN 118712-89-3)

0 %

-

31.12.2026

0.7437

ex 2916 20 00

20

Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0)

0 %

-

31.12.2022

0.7931

ex 2916 20 00

25

Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7933

ex 2916 20 00

35

2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8057

ex 2916 20 00

45

Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3463

ex 2916 20 00

50

Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)

0 %

-

31.12.2023

0.4931

ex 2916 20 00

60

3-Cyclohexylpropionic acid (CAS RN 701-97-3)

0 %

-

31.12.2025

0.7531

ex 2916 20 00

70

Cyclopropanecarbonyl chloride (CAS RN 4023-34-1)

0 %

-

31.12.2023

0.5421

ex 2916 31 00

10

Benzyl benzoate (CAS RN 120-51-4)

0 %

-

31.12.2026

0.8214

ex 2916 31 00

20

Phenethyl benzoate (CAS RN 94-47-3) with a purity by weight of 95 % or more

0 %

-

31.12.2026

0.6248

ex 2916 39 90

13

3,5-Dinitrobenzoic acid (CAS RN 99-34-3)

0 %

-

31.12.2024

0.5214

ex 2916 39 90

15

2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)

0 %

-

31.12.2026

0.7929

ex 2916 39 90

16

3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.2636

ex 2916 39 90

20

3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)

0 %

-

31.12.2023

0.7845

ex 2916 39 90

22

6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.6557

ex 2916 39 90

23

(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)

0 %

-

31.12.2024

0.4951

ex 2916 39 90

25

2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)

0 %

-

31.12.2026

0.7827

ex 2916 39 90

27

Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.4930

ex 2916 39 90

30

2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)

0 %

-

31.12.2025

0.5944

ex 2916 39 90

35

Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)

0 %

-

31.12.2023

0.6794

ex 2916 39 90

41

4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)

0 %

-

31.12.2025

0.7734

ex 2916 39 90

43

2-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0)

0 %

-

31.12.2024

0.6121

ex 2916 39 90

48

3-Fluorobenzoyl chloride (CAS RN 1711-07-5)

0 %

-

31.12.2023

0.2634

ex 2916 39 90

50

3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)

0 %

-

31.12.2023

0.6661

ex 2916 39 90

53

5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)

0 %

-

31.12.2025

0.4238

ex 2916 39 90

55

4-tert-Butylbenzoic acid (CAS RN 98-73-7 )

0 %

-

31.12.2022

0.7678

ex 2916 39 90

57

2-Phenylprop-2-enoic acid (CAS RN 492-38-6)

0 %

-

31.12.2023

0.8169

ex 2916 39 90

63

2-Phenylbutyric acid (CAS RN 90-27-7) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.3462

ex 2916 39 90

70

Ibuprofen (INN) (CAS RN 15687-27-1)

0 %

-

31.12.2023

0.7117

ex 2916 39 90

73

(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)

0 %

-

31.12.2026

0.5541

ex 2916 39 90

75

m-Toluic acid (CAS RN 99-04-7)

0 %

-

31.12.2022

0.8039

ex 2916 39 90

78

(2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more

0 %

-

31.12.2025

0.5543

ex 2916 39 90

85

(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)

0 %

-

31.12.2022

0.3457

ex 2917 11 00

20

Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)

0 %

-

31.12.2023

0.4746

ex 2917 11 00

30

Cobalt oxalate (CAS RN 814-89-1)

0 %

-

31.12.2024

0.7563

ex 2917 12 00

20

Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6)

0 %

-

31.12.2023

0.4684

ex 2917 19 10

10

Dimethyl malonate (CAS RN 108-59-8)

0 %

-

31.12.2024

0.5602

ex 2917 19 10

20

Diethyl malonate (CAS RN 105-53-3)

0 %

-

31.12.2022

0.6089

ex 2917 19 80

15

Dimethyl but-2-ynedioate (CAS RN 762-42-5)

0 %

-

31.12.2023

0.4790

ex 2917 19 80

30

Ethylene brassylate (CAS RN 105-95-3)

0 %

-

31.12.2024

0.7451

ex 2917 19 80

35

Diethyl methylmalonate (CAS RN 609-08-5)

0 %

-

31.12.2023

0.7880

ex 2917 19 80

45

Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.4918

ex 2917 19 80

50

Tetradecanedioic acid (CAS RN 821-38-5)

0 %

-

31.12.2025

0.3454

ex 2917 19 80

70

Itaconic acid (CAS RN 97-65-4)

0 %

-

31.12.2023

0.2631

ex 2917 20 00

30

1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)

0 %

-

31.12.2023

0.2627

ex 2917 20 00

40

3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)

0 %

-

31.12.2023

0.2954

ex 2917 34 00

10

Diallyl phthalate (CAS RN 131-17-9)

0 %

-

31.12.2023

0.4945

ex 2917 39 95

20

Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)

0 %

-

31.12.2025

0.6796

ex 2917 39 95

25

Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)

0 %

-

31.12.2025

0.3640

ex 2917 39 95

30

Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)

0 %

-

31.12.2025

0.6800

ex 2917 39 95

35

1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)

0 %

-

31.12.2025

0.6123

ex 2917 39 95

40

Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)

0 %

-

31.12.2023

0.6553

ex 2917 39 95

50

1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)

0 %

-

31.12.2024

0.6554

ex 2917 39 95

60

Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)

0 %

-

31.12.2024

0.6366

ex 2918 19 30

10

Cholic acid (CAS RN 81-25-4)

0 %

-

31.12.2024

0.6367

ex 2918 19 30

20

3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)

0 %

-

31.12.2024

0.2950

ex 2918 19 98

20

L-Malic acid (CAS RN 97-67-6)

0 %

-

31.12.2023

0.7702

ex 2918 19 98

30

Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1)

0 %

-

31.12.2024

0.7703

ex 2918 19 98

40

Ethyl 1-hydroxycyclohexanecarboxylate (CAS RN 1127-01-1)

0 %

-

31.12.2024

0.7907

ex 2918 19 98

50

12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (1)

0 %

-

31.12.2024

0.8044

ex 2918 19 98

60

(R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3637

ex 2918 29 00

10

Monohydroxynaphthoic acids

0 %

-

31.12.2023

0.5781

ex 2918 29 00

35

Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)

0 %

-

31.12.2022

0.8008

ex 2918 29 00

40

3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %

0 %

-

31.12.2025

0.3638

ex 2918 29 00

50

Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)

0 %

-

31.12.2023

0.5220

ex 2918 29 00

60

Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)

0 %

-

31.12.2026

0.6456

ex 2918 29 00

70

3,5-Diiodosalicylic acid (CAS RN 133-91-5)

0 %

-

31.12.2024

0.7344

ex 2918 30 00

15

2-fluoro-5-formylbenzoic acid (CAS RN 550363-85-4)

0 %

-

31.12.2022

0.7605

ex 2918 30 00

25

(E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2)

0 %

-

31.12.2023

0.4427

ex 2918 30 00

30

Methyl-2-benzoylbenzoate (CAS RN 606-28-0)

0 %

-

31.12.2023

0.7864

ex 2918 30 00

35

3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)

0 %

-

31.12.2024

0.8075

ex 2918 30 00

45

Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.5857

ex 2918 30 00

50

Ethyl acetoacetate (CAS RN 141-97-9)

0 %

-

31.12.2022

0.6250

ex 2918 30 00

60

4-Oxovaleric acid (CAS RN 123-76-2)

0 %

-

31.12.2024

0.6455

ex 2918 30 00

70

2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)

0 %

-

31.12.2024

0.7062

ex 2918 30 00

80

Methyl benzoylformate (CAS RN 15206-55-0)

0 %

-

31.12.2026

0.2946

ex 2918 99 90

10

3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)

0 %

-

31.12.2023

0.6814

ex 2918 99 90

13

3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)

0 %

-

31.12.2025

0.5856

ex 2918 99 90

15

Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)

0 %

-

31.12.2022

0.6901

ex 2918 99 90

18

Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)

0 %

-

31.12.2025

0.2949

ex 2918 99 90

20

Methyl 3-methoxyacrylate (CAS RN 5788-17-0)

0 %

-

31.12.2024

0.6147

ex 2918 99 90

25

Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)

0 %

-

31.12.2023

0.7256

ex 2918 99 90

27

Ethyl 3-ethoxypropionate (CAS RN 763-69-9)

0 %

-

31.12.2022

0.2948

ex 2918 99 90

30

Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)

0 %

-

31.12.2023

0.7597

ex 2918 99 90

33

Vanillic Acid (CAS RN 121-34-6) containing

—	not more than 10 ppm of Palladium (CAS RN 7440-05-3),

—	not more than 10 ppm of bismuth (CAS RN 7440-69-9),

—	not more than 14 ppm of formaldehyde (CAS RN 50-00-0),

—	not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),

—	not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)

0 %

-

31.12.2023

0.6342

ex 2918 99 90

35

p-Anisic acid (CAS RN 100-09-4)

0 %

-

31.12.2024

0.7358

ex 2918 99 90

38

Diclofop-methyl (ISO) (CAS RN 51338-27-3)

0 %

-

31.12.2022

0.2945

ex 2918 99 90

40

trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)

0 %

-

31.12.2023

0.7934

ex 2918 99 90

43

Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more

0 %

-

31.12.2025

0.6224

ex 2918 99 90

45

4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)

0 %

-

31.12.2024

0.8066

ex 2918 99 90

48

2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.2947

ex 2918 99 90

50

Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)

0 %

-

31.12.2023

0.6552

ex 2918 99 90

55

Stearyl glycyrrhetinate(CAS RN 13832-70-7)

0 %

-

31.12.2024

0.2943

ex 2918 99 90

60

3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)

0 %

-

31.12.2023

0.6523

ex 2918 99 90

65

Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)

0 %

-

31.12.2024

0.4742

ex 2918 99 90

70

Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)

0 %

-

31.12.2024

0.6747

ex 2918 99 90

85

Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.7462

ex 2919 90 00

15

Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583-54-7)

0 %

-

31.12.2023

0.7723

ex 2919 90 00

25

Triphenyl phosphate (CAS RN 115-86-6)

0 %

-

31.12.2024

0.2940

ex 2919 90 00

30

Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)

0 %

-

31.12.2023

0.2942

ex 2919 90 00

35

2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique (1)

0 %

-

31.12.2023

0.3867

ex 2919 90 00

40

Tri-n-hexylphosphate (CAS RN 2528-39-4)

0 %

-

31.12.2023

0.5495

ex 2919 90 00

50

Triethyl phosphate (CAS RN 78-40-0)

0 %

-

31.12.2026

0.6188

ex 2919 90 00

60

Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

0 %

-

31.12.2023

0.6413

ex 2919 90 00

70

Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)

0 %

-

31.12.2024

0.6253

ex 2920 19 00

30

2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS RN 4090-51-1)

0 %

-

31.12.2024

0.2941

ex 2920 19 00

40

Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more

0 %

-

31.12.2023

0.3634

2920 23 00

Trimethyl phosphite (CAS RN 121-45-9)

0 %

-

31.12.2023

0.4158

2920 24 00

Triethyl phosphite (CAS RN 122-52-1)

0 %

-

31.12.2026

0.2626

ex 2920 29 00

10

O,O'-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)

0 %

-

31.12.2023

0.7227

ex 2920 29 00

15

Phosphorous acid 3,3',5,5'-tetrakis(1,1-dimethylethyl)-6,6'-dimethyl[1,1'-biphenyl]-2,2'-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5)

0 %

-

31.12.2022

0.5038

ex 2920 29 00

20

Tris(methylphenyl)phosphite (CAS RN 25586-42-9)

0 %

-

31.12.2025

0.5045

ex 2920 29 00

40

Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)

0 %

-

31.12.2025

0.6004

ex 2920 29 00

50

Fosetyl-aluminium (CAS RN 39148-24-8)

0 %

-

31.12.2023

0.7898

ex 2920 29 00

80

2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.3635

ex 2920 90 10

10

Diethyl sulphate (CAS RN 64-67-5)

0 %

-

31.12.2023

0.7559

ex 2920 90 10

15

Ethyl methyl carbonate (CAS RN 623-53-0)

3,2 %

-

31.12.2022

0.2605

ex 2920 90 10

20

Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3)

0 %

-

31.12.2023

0.3685

ex 2920 90 10

40

Dimethyl carbonate (CAS RN 616-38-6)

0 %

-

31.12.2023

0.3868

ex 2920 90 10

50

Di-tert-butyl dicarbonate (CAS RN 24424-99-5)

0 %

-

31.12.2023

0.5756

ex 2920 90 10

60

2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)

0 %

-

31.12.2022

0.7588

ex 2920 90 70

20

Diethyl phosphorochloridate (CAS RN 814-49-3)

0 %

-

31.12.2023

0.7465

ex 2920 90 70

30

2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8)

0 %

-

31.12.2023

0.5947

ex 2920 90 70

60

Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)

0 %

-

31.12.2023

0.6598

ex 2920 90 70

80

Bis(pinacolato)diboron (CAS RN 73183-34-3)

0 %

-

31.12.2025

0.5668

2921 13 00

2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)

0 %

-

31.12.2022

0.3629

ex 2921 19 99

20

Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)

0 %

-

31.12.2023

0.3631

ex 2921 19 99

30

Allylamine (CAS RN 107-11-9)

0 %

-

31.12.2023

0.7073

ex 2921 19 99

45

2-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)

0 %

-

31.12.2026

0.5650

ex 2921 19 99

70

N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)

0 %

-

31.12.2022

0.6269

ex 2921 19 99

80

Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

0 %

-

31.12.2024

0.8045

ex 2921 29 00

15

(2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3630

ex 2921 29 00

20

Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)

0 %

-

31.12.2023

0.8067

ex 2921 29 00

25

N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more

0 %

-

31.12.2025

0.3625

ex 2921 29 00

30

Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)

0 %

-

31.12.2023

0.8170

ex 2921 29 00

35

Pentamethylenediamine (CAS RN 462-94-2) with a purity by weight of 99 % or more, also as an aqueous solution containing by weight more than 50 % of pentamethylenediamine

0 %

-

31.12.2026

0.4917

ex 2921 29 00

40

Decamethylenediamine (CAS RN 646-25-3)

0 %

-

31.12.2025

0.5256

ex 2921 29 00

50

N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4)

0 %

-

31.12.2026

0.7947

ex 2921 29 00

70

N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7488

ex 2921 30 10

10

2-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1)

0 %

-

31.12.2023

0.5768

ex 2921 30 99

40

Cyclopropylamine (CAS RN 765-30-0)

0 %

-

31.12.2022

0.7750

ex 2921 30 99

50

Bicyclo[1.1.1]pentan-1-amine hydrochloride (CAS RN 22287-35-0)

0 %

-

31.12.2024

0.3909

ex 2921 42 00

25

Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)

0 %

-

31.12.2023

0.3978

ex 2921 42 00

35

2-Nitroaniline (CAS RN 88-74-4)

0 %

-

31.12.2023

0.3979

ex 2921 42 00

45

2,4,5-Trichloroaniline (CAS RN 636-30-6)

0 %

-

31.12.2023

0.2620

ex 2921 42 00

50

3-Aminobenzenesulfonic acid (CAS RN 121-47-1)

0 %

-

31.12.2023

0.7739

ex 2921 42 00

55

4-Chloroaniline (CAS RN 106-47-8)

0 %

-

31.12.2024

0.3623

ex 2921 42 00

70

2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)

0 %

-

31.12.2024

0.3622

ex 2921 42 00

80

4-Chloro-2-nitroaniline (CAS RN 89-63-4)

0 %

-

31.12.2023

0.3687

ex 2921 42 00

85

3,5-Dichloroaniline (CAS RN 626-43-7)

0 %

-

31.12.2023

0.5616

ex 2921 42 00

86

2,5-Dichloroaniline (CAS RN 95-82-9)

0 %

-

31.12.2022

0.5603

ex 2921 42 00

87

N-Methylaniline (CAS RN 100-61-8)

0 %

-

31.12.2022

0.5617

ex 2921 42 00

88

3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)

0 %

-

31.12.2022

0.2617

ex 2921 43 00

20

4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)

0 %

-

31.12.2023

0.2615

ex 2921 43 00

30

3-Nitro-p-toluidine (CAS RN 119-32-4)

0 %

-

31.12.2023

0.3980

ex 2921 43 00

40

4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)

0 %

-

31.12.2024

0.5124

ex 2921 43 00

60

3-Aminobenzotrifluoride (CAS RN 98-16-8)

0 %

-

31.12.2025

0.7583

ex 2921 43 00

70

5-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3)

0 %

-

31.12.2023

0.3621

ex 2921 44 00

20

Diphenylamine (CAS RN 122-39-4)

0 %

-

31.12.2023

0.2618

ex 2921 45 00

20

2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)

0 %

-

31.12.2024

0.7628

ex 2921 45 00

30

(5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548-48-2)

0 %

-

31.12.2023

0.5994

ex 2921 45 00

50

7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)

0 %

-

31.12.2024

0.7316

ex 2921 45 00

60

1-Naphthylamine (CAS RN 134-32-7)

0 %

-

31.12.2022

0.7315

ex 2921 45 00

70

8-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8)

0 %

-

31.12.2022

0.7629

ex 2921 45 00

80

2-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3)

0 %

-

31.12.2023

0.3618

ex 2921 49 00

20

Pendimethalin (ISO) (CAS RN 40487-42-1)

3,5 %

-

31.12.2023

0.7705

ex 2921 49 00

30

4-Isopropylaniline (CAS RN 99-88-7)

0 %

-

31.12.2024

0.7592

ex 2921 49 00

35

2-Ethylaniline (CAS RN 578-54-1)

0 %

-

31.12.2023

0.2609

ex 2921 49 00

40

N-1-Naphthylaniline (CAS RN 90-30-2)

0 %

-

31.12.2023

0.8019

ex 2921 49 00

45

2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8020

ex 2921 49 00

55

2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.6825

ex 2921 49 00

60

2,6-Diisopropylaniline (CAS RN 24544-04-5)

0 %

-

31.12.2025

0.8059

ex 2921 49 00

65

Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.3981

ex 2921 51 19

30

2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)

0 %

-

31.12.2023

0.4184

ex 2921 51 19

40

p-Phenylenediamine (CAS RN 106-50-3)

0 %

-

31.12.2026

0.4498

ex 2921 51 19

50

Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene

0 %

-

31.12.2024

0.5995

ex 2921 51 19

60

2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)

0 %

-

31.12.2024

0.7894

ex 2921 51 90

10

N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.2612

ex 2921 59 90

10

Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)

0 %

-

31.12.2023

0.3785

ex 2921 59 90

30

3,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)

0 %

-

31.12.2022

0.3870

ex 2921 59 90

40

4,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8)

0 %

-

31.12.2023

0.5509

ex 2921 59 90

60

(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)

0 %

-

31.12.2022

0.7860

ex 2922 19 00

15

Aqueous solution, containing by weight:

—	73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),

—	4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)

0 %

-

31.12.2024

0.5757

ex 2922 19 00

20

2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)

0 %

-

31.12.2022

0.7946

ex 2922 19 00

29

N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.3617

ex 2922 19 00

30

N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033-62-3)

0 %

-

31.12.2023

0.6947

ex 2922 19 00

35

2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)

0 %

-

31.12.2025

0.7179

ex 2922 19 00

40

(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)

0 %

-

31.12.2026

0.7480

ex 2922 19 00

45

2-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)

0 %

-

31.12.2023

0.3616

ex 2922 19 00

50

2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)

0 %

-

31.12.2024

0.7587

ex 2922 19 00

55

3-Aminoadamantan-1-ol (CAS RN 702-82-9)

0 %

-

31.12.2023

0.3871

ex 2922 19 00

60

N,N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine), (CAS RN 83016-70-0)

0 %

-

31.12.2023

0.5905

ex 2922 19 00

65

trans-4-Aminocyclohexanol (CAS RN 27489-62-9)

0 %

-

31.12.2023

0.7935

ex 2922 19 00

70

2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.5986

ex 2922 19 00

75

2-Ethoxyethylamine (CAS RN 110-76-9)

0 %

-

31.12.2023

0.4665

ex 2922 19 00

80

N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)

0 %

-

31.12.2024

0.5911

ex 2922 19 00

85

(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)

0 %

-

31.12.2023

0.5996

ex 2922 21 00

10

2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)

0 %

-

31.12.2024

0.2703

ex 2922 21 00

30

6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)

0 %

-

31.12.2024

0.2704

ex 2922 21 00

40

7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)

0 %

-

31.12.2023

0.3873

ex 2922 21 00

50

Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)

0 %

-

31.12.2024

0.5997

ex 2922 21 00

60

4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)

0 %

-

31.12.2023

0.2702

ex 2922 29 00

20

3-Aminophenol (CAS RN 591-27-5)

0 %

-

31.12.2023

0.3982

ex 2922 29 00

25

5-Amino-o-cresol (CAS RN 2835-95-2)

0 %

-

31.12.2023

0.6624

ex 2922 29 00

30

1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)

0 %

-

31.12.2025

0.7642

ex 2922 29 00

33

o-Phenetidine (CAS RN 94-70-2)

0 %

-

31.12.2023

0.2936

ex 2922 29 00

45

Anisidines

0 %

-

31.12.2023

0.6634

ex 2922 29 00

63

Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.4627

ex 2922 29 00

65

4-Trifluoromethoxyaniline (CAS RN 461-82-5)

0 %

-

31.12.2024

0.7481

ex 2922 29 00

67

4-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)

0 %

-

31.12.2023

0.2692

ex 2922 29 00

70

4-Nitro-o-anisidine (CAS RN 97-52-9)

0 %

-

31.12.2023

0.7026

ex 2922 29 00

73

Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)

0 %

-

31.12.2026

0.4956

ex 2922 29 00

75

4-(2-Aminoethyl)phenol (CAS RN 51-67-2)

0 %

-

31.12.2025

0.2696

ex 2922 29 00

80

3-Diethylaminophenol (CAS RN 91-68-9)

0 %

-

31.12.2023

0.5898

ex 2922 29 00

85

4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)

0 %

-

31.12.2023

0.2690

ex 2922 39 00

10

1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts

0 %

-

31.12.2023

0.7371

ex 2922 39 00

15

2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9)

0 %

-

31.12.2022

0.4914

ex 2922 39 00

20

2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)

0 %

-

31.12.2025

0.7713

ex 2922 39 00

30

(2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8)

0 %

-

31.12.2024

0.6761

ex 2922 39 00

35

5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)

0 %

-

31.12.2025

0.7800

ex 2922 39 00

40

4,4'-Bis(diethylamino)benzophenone (CAS RN 90-93-7)

0 %

-

31.12.2024

0.3546

ex 2922 43 00

10

Anthranilic acid (CAS RN 118-92-3)

0 %

-

31.12.2023

0.3547

ex 2922 49 85

10

Ornithine aspartate (INNM) (CAS RN 3230-94-2)

0 %

-

31.12.2023

0.7853

ex 2922 49 85

13

Benzyl glycinate-4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.5037

ex 2922 49 85

17

Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

0 %

-

31.12.2025

0.5619

ex 2922 49 85

20

3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)

0 %

-

31.12.2022

0.8162

ex 2922 49 85

23

2-Ethylhexyl 4-aminobenzoate (CAS RN 26218-04-2) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.6340

ex 2922 49 85

25

Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)

0 %

-

31.12.2024

0.6948

ex 2922 49 85

30

Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)

0 %

-

31.12.2022

0.3544

ex 2922 49 85

40

Norvaline

0 %

-

31.12.2023

0.3983

ex 2922 49 85

50

D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)

0 %

-

31.12.2024

0.4239

ex 2922 49 85

60

Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)

0 %

-

31.12.2022

0.6650

ex 2922 49 85

65

Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)

0 %

-

31.12.2025

0.4426

ex 2922 49 85

70

2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)

0 %

-

31.12.2023

0.7254

ex 2922 49 85

75

L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)

0 %

-

31.12.2022

0.6100

ex 2922 49 85

80

12-Aminododecanoic acid (CAS RN 693-57-2)

0 %

-

31.12.2023

0.7020

ex 2922 50 00

10

2-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)

0 %

-

31.12.2026

0.7257

ex 2922 50 00

15

3,5-Diiodothyronine (CAS RN 1041-01-6)

0 %

-

31.12.2022

0.4702

ex 2922 50 00

20

1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)

0 %

-

31.12.2024

0.7523

ex 2922 50 00

35

(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3)

0 %

-

31.12.2023

0.2681

ex 2922 50 00

70

2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate

0 %

-

31.12.2023

0.6226

ex 2923 10 00

10

Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)

0 %

-

31.12.2024

0.3543

ex 2923 90 00

10

Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide

0 %

-

31.12.2023

0.4499

ex 2923 90 00

25

Tetrakis(dimethylditetradecylammonium) molybdate (CAS RN 117342-25-3)

0 %

-

31.12.2023

0.8159

ex 2923 90 00

30

Tetrabutylammonium tetrahydroborate (CAS RN 33725-74-5) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.7879

ex 2923 90 00

50

Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7089

ex 2923 90 00

55

Tetrabutylammonium bromide (CAS RN 1643-19-2)

0 %

-

31.12.2026

0.7615

ex 2923 90 00

65

N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %

0 %

-

31.12.2023

0.3538

ex 2923 90 00

70

Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:

—	40 % (± 2 %) by weight of tetrapropylammonium hydroxide,

—	0,3 % by weight or less of carbonate,

—	0,1 % by weight or less of tripropylamine,

—	500 mg/kg or less of bromide and

—	25 mg/kg or less of potassium and sodium taken together

0 %

-

31.12.2023

0.5063

ex 2923 90 00

75

Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

—	35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

—	not more than 1 000 mg/kg of chloride,

—	not more than 2 mg/kg of iron, and

—	not more than 10 mg/kg of potassium

0 %

-

31.12.2025

0.3536

ex 2923 90 00

80

Diallyldimethylammonium chloride (CAS RN 7398-69-8) , in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride

0 %

-

31.12.2023

0.6410

ex 2923 90 00

85

N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)

0 %

-

31.12.2024

0.2678

ex 2924 19 00

10

2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)

0 %

-

31.12.2023

0.6227

ex 2924 19 00

15

N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)

0 %

-

31.12.2024

0.8000

ex 2924 19 00

18

2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7258

ex 2924 19 00

25

Isobutylidenediurea (CAS RN 6104-30-9)

0 %

-

31.12.2022

0.8027

ex 2924 19 00

28

(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3535

ex 2924 19 00

30

Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)

0 %

-

31.12.2023

0.8030

ex 2924 19 00

33

(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more

0 %

-

31.12.2025

0.6549

ex 2924 19 00

35

Acetamide (CAS RN 60-35-5)

0 %

-

31.12.2024

0.8041

ex 2924 19 00

38

Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8049

ex 2924 19 00

43

N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7060

ex 2924 19 00

55

2-Propynyl butylcarbamate (CAS RN 76114-73-3)

0 %

-

31.12.2026

0.4160

ex 2924 19 00

60

N,N-Dimethylacrylamide (CAS RN 2680-03-7)

0 %

-

31.12.2026

0.7482

ex 2924 19 00

65

2,2,2-trifluoroacetamide (CAS RN 354-38-1)

0 %

-

31.12.2023

0.4380

ex 2924 19 00

70

Methylcarbamate (CAS RN 598-55-0)

0 %

-

31.12.2023

0.7575

ex 2924 19 00

75

(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0)

0 %

-

31.12.2023

0.5605

ex 2924 19 00

80

Tetrabutylurea (CAS RN 4559-86-8)

0 %

-

31.12.2022

0.2939

ex 2924 21 00

10

4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts

0 %

-

31.12.2023

0.5998

ex 2924 21 00

20

(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)

0 %

-

31.12.2024

0.3533

2924 25 00

Alachlor (ISO), (CAS RN 15972-60-8)

0 %

-

31.12.2023

0.6047

ex 2924 29 70

12

4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)

0 %

-

31.12.2024

0.3534

ex 2924 29 70

15

Acetochlor (ISO), (CAS RN 34256-82-1)

0 %

-

31.12.2023

0.6266

ex 2924 29 70

17

2-(Trifluoromethyl)benzamide (CAS RN 360-64-5)

0 %

-

31.12.2024

0.6363

ex 2924 29 70

19

2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)

0 %

-

31.12.2024

0.4685

ex 2924 29 70

20

2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)

0 %

-

31.12.2024

0.6568

ex 2924 29 70

23

Benalaxyl-M (ISO) (CAS RN 98243-83-5)

0 %

-

31.12.2024

0.8153

ex 2924 29 70

25

2-[2-(Methoxycarbonyl-phenyl-amino)-phenyl]-acetic acid (CAS RN 353497-35-5) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.7118

ex 2924 29 70

30

Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)

0 %

-

31.12.2026

0.8161

ex 2924 29 70

35

N-(1,1-Dimethylethyl)-4-amino-benzamide (CAS RN 93483-71-7) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.6110

ex 2924 29 70

37

Beflubutamid (ISO) (CAS RN 113614-08-7)

0 %

-

31.12.2023

0.5066

ex 2924 29 70

40

N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)

0 %

-

31.12.2025

0.5127

ex 2924 29 70

45

Propoxur (ISO) (CAS RN 114-26-1)

0 %

-

31.12.2025

0.8183

ex 2924 29 70

46

S-Metolachlor (ISO) (CAS RN 87392-12-9) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.7841

ex 2924 29 70

47

(S)-tert-butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.8184

ex 2924 29 70

52

Zoxamide (ISO) (CAS RN 156052-68-5) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.5622

ex 2924 29 70

53

4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)

0 %

-

31.12.2022

0.5069

ex 2924 29 70

55

N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)

0 %

-

31.12.2025

0.8043

ex 2924 29 70

58

2-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.6767

ex 2924 29 70

62

2-Chlorobenzamide (CAS RN 609-66-5)

0 %

-

31.12.2025

0.5388

ex 2924 29 70

63

N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)

0 %

-

31.12.2022

0.6766

ex 2924 29 70

64

N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)

0 %

-

31.12.2025

0.7632

ex 2924 29 70

67

N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2)

0 %

-

31.12.2023

0.7582

ex 2924 29 70

70

N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide

0 %

-

31.12.2023

0.6480

ex 2924 29 70

73

Napropamide (ISO) (CAS RN 15299-99-7)

0 %

-

31.12.2024

0.2672

ex 2924 29 70

75

3-Amino-p-anisanilide (CAS RN 120-35-4)

0 %

-

31.12.2023

0.8060

ex 2924 29 70

78

5-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.2673

ex 2924 29 70

85

p-Aminobenzamide (CAS RN 2835-68-9)

0 %

-

31.12.2023

0.4257

ex 2924 29 70

86

Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more

0 %

-

31.12.2022

0.4495

ex 2924 29 70

88

5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-63-7)

0 %

-

31.12.2023

0.4493

ex 2924 29 70

89

Flutolanil (ISO) (CAS RN 66332-96-5)

0 %

-

31.12.2023

0.3690

ex 2924 29 70

91

3-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6)

0 %

-

31.12.2023

0.3691

ex 2924 29 70

92

3-Hydroxy-2-naphthanilide (CAS RN 92-77-3)

0 %

-

31.12.2024

0.3692

ex 2924 29 70

93

3-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5)

0 %

-

31.12.2023

0.3693

ex 2924 29 70

94

2'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)

0 %

-

31.12.2023

0.3863

ex 2924 29 70

97

1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)

0 %

-

31.12.2023

0.3526

ex 2925 11 00

20

Saccharin and its sodium salt

0 %

-

31.12.2023

0.2674

ex 2925 19 95

10

N-Phenylmaleimide (CAS RN 941-69-5)

0 %

-

31.12.2023

0.5612

ex 2925 19 95

20

4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)

0 %

-

31.12.2022

0.5740

ex 2925 19 95

30

N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)

0 %

-

31.12.2022

0.8013

ex 2925 19 95

40

N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more

0 %

-

31.12.2025

0.2934

ex 2925 29 00

10

Dicyclohexylcarbodiimide (CAS RN 538-75-0)

0 %

-

31.12.2023

0.5891

ex 2925 29 00

20

N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)

0 %

-

31.12.2023

0.7749

ex 2925 29 00

40

N-amidinosarcosine (CAS RN 57-00-1)

0 %

-

31.12.2024

0.7832

ex 2925 29 00

50

(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.8033

ex 2925 29 00

60

Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.8040

ex 2925 29 00

70

Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7430

ex 2926 90 70

15

2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0)

0 %

-

31.12.2022

0.6258

ex 2926 90 70

16

4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)

0 %

-

31.12.2024

0.6934

ex 2926 90 70

17

Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.7408

ex 2926 90 70

18

Flumethrin (ISO) (CAS RN 69770-45-2)

0 %

-

31.12.2022

0.7466

ex 2926 90 70

19

2-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)

0 %

-

31.12.2023

0.2668

ex 2926 90 70

20

2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)

0 %

-

31.12.2024

0.7458

ex 2926 90 70

21

4-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)

0 %

-

31.12.2023

0.7514

ex 2926 90 70

22

Acetonitrile (CAS RN 75-05-8)

0 %

-

31.12.2023

0.6109

ex 2926 90 70

23

Acrinathrin (ISO) (CAS RN 101007-06-1)

0 %

-

31.12.2023

0.7805

ex 2926 90 70

24

2-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.5227

ex 2926 90 70

25

2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)

0 %

-

31.12.2026

0.6259

ex 2926 90 70

26

Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products (1)

0 %

-

31.12.2024

0.6149

ex 2926 90 70

27

Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)

0 %

-

31.12.2023

0.7201

ex 2926 90 70

30

4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)

0 %

-

31.12.2026

0.7406

ex 2926 90 70

33

Deltamethrin (ISO) (CAS RN 52918-63-5)

0 %

-

31.12.2022

0.7034

ex 2926 90 70

35

4-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)

0 %

-

31.12.2026

0.6970

ex 2926 90 70

40

2-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)

0 %

-

31.12.2023

0.3522

ex 2926 90 70

50

Alkyl or alkoxyalkyl esters of cyanoacetic acid

0 %

-

31.12.2023

0.8217

ex 2926 90 70

56

Methyl 2-cyano-2-propylpentanoate (CAS RN 66546-92-7) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.4182

ex 2926 90 70

61

m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)

0 %

-

31.12.2026

0.4644

ex 2926 90 70

64

Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers

0 %

-

31.12.2024

0.4802

ex 2926 90 70

70

Methacrylonitrile (CAS RN 126-98-7)

0 %

-

31.12.2024

0.2543

ex 2926 90 70

74

Chlorothalonil (ISO) (CAS RN 1897-45-6)

0 %

-

31.12.2024

0.3521

ex 2926 90 70

75

Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)

0 %

-

31.12.2024

0.3516

ex 2926 90 70

80

Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)

0 %

-

31.12.2023

0.3514

ex 2926 90 70

86

Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)

0 %

-

31.12.2023

0.3515

ex 2926 90 70

89

Butyronitrile (CAS RN 109-74-0)

0 %

-

31.12.2023

0.2667

ex 2927 00 00

10

2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride

0 %

-

31.12.2023

0.2665

ex 2927 00 00

20

4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)

0 %

-

31.12.2023

0.7337

ex 2927 00 00

25

2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)

0 %

-

31.12.2022

0.2810

ex 2927 00 00

30

4'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)

0 %

-

31.12.2023

0.6306

ex 2927 00 00

35

C.C'-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180°C or more but not more than 220°C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam

0 %

-

31.12.2024

0.3984

ex 2927 00 00

60

4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0)

0 %

-

31.12.2023

0.5626

ex 2927 00 00

80

4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)

0 %

-

31.12.2022

0.2661

ex 2928 00 90

10

3,3’-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide (CAS RN 32687-78-8)

0 %

-

31.12.2023

0.6479

ex 2928 00 90

13

Cymoxanil (ISO) (CAS RN 57966-95-7)

0 %

-

31.12.2024

0.6548

ex 2928 00 90

18

Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more

0 %

-

31.12.2024

0.6871

ex 2928 00 90

23

Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.4929

ex 2928 00 90

25

Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution

0 %

-

31.12.2025

0.6985

ex 2928 00 90

28

Pentan-2-one oxime (CAS RN 623-40-5)

0 %

-

31.12.2026

0.5438

ex 2928 00 90

30

N-Isopropylhydroxylamine (CAS RN 5080-22-8)

0 %

-

31.12.2026

0.7448

ex 2928 00 90

33

4- Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)

0 %

-

31.12.2023

0.8061

ex 2928 00 90

38

Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight:

—	30 % or more but not more than 40 % of methoxyammonium chloride

—	not more than 4 % of hydrochloric acid

0 %

-

31.12.2025

0.2659

ex 2928 00 90

40

O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)

0 %

-

31.12.2023

0.8093

ex 2928 00 90

43

2-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.5919

ex 2928 00 90

45

Tebufenozide (ISO) (CAS RN 112410-23-8)

0 %

-

31.12.2023

0.8158

ex 2928 00 90

48

1-{[(1H-Fluoren-9-ylmetoxi)carbonil]oxi}pyrrolidine-2,5-dione (CAS RN 82911-69-1) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.6635

ex 2928 00 90

50

Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %

0 %

-

31.12.2025

0.5918

ex 2928 00 90

55

Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)

0 %

-

31.12.2023

0.6364

ex 2928 00 90

65

2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride

0 %

-

31.12.2024

0.4544

ex 2928 00 90

70

Butanone oxime (CAS RN 96-29-7)

0 %

-

31.12.2023

0.5228

ex 2928 00 90

75

Metaflumizone (ISO) (CAS RN 139968-49-3)

0 %

-

31.12.2026

0.3510

ex 2928 00 90

80

Cyflufenamid (ISO) (CAS RN 180409-60-3)

0 %

-

31.12.2023

0.4714

ex 2929 10 00

15

3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91-97-4)

0 %

-

31.12.2024

0.5827

ex 2929 10 00

20

Butyl isocyanate (CAS RN 111-36-4)

0 %

-

31.12.2022

0.2660

ex 2929 10 00

40

m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)

0 %

-

31.12.2023

0.2657

ex 2929 10 00

50

m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)

0 %

-

31.12.2023

0.5033

ex 2929 10 00

55

2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)

0 %

-

31.12.2022

0.3509

ex 2929 10 00

60

Trimethylhexamethylene diisocyanate, mixed isomers

0 %

-

31.12.2023

0.4188

ex 2929 10 00

80

1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)

0 %

-

31.12.2022

0.8171

ex 2929 90 00

40

N-Butylphosphorothioic triamide (CAS RN 94317-64-3) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.8172

ex 2929 90 00

50

N-Propylphosphorothioic triamide (CAS RN 916809-14-8) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.5278

ex 2930 20 00

20

2-Isopropylethylthiocarbamate (CAS RN 141-98-0)

0 %

-

31.12.2022

0.4298

ex 2930 20 00

40

Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more

0 %

-

31.12.2022

0.5035

ex 2930 90 98

10

2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)

0 %

-

31.12.2022

0.8036

ex 2930 90 98

11

Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7483

ex 2930 90 98

12

4,4'-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones (1)

0 %

-

31.12.2023

0.5390

ex 2930 90 98

13

Mercaptamine hydrochloride (CAS RN 156-57-0)

0 %

-

31.12.2022

0.8047

ex 2930 90 98

14

(E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.2932

ex 2930 90 98

15

Ethoprophos (ISO) (CAS RN 13194-48-4)

0 %

-

31.12.2023

0.6551

ex 2930 90 98

16

3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)

0 %

-

31.12.2024

0.5999

ex 2930 90 98

17

2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)

0 %

-

31.12.2024

0.7748

ex 2930 90 98

18

Dimethyl sulfone (CAS RN 67-71-0)

0 %

-

31.12.2024

0.8050

ex 2930 90 98

19

4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7799

ex 2930 90 98

20

4-(4-Methylphenylthio)benzophenone (CAS RN 83846-85-9)

0 %

-

31.12.2024

0.6750

ex 2930 90 98

21

[2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)

0 %

-

31.12.2026

0.6769

ex 2930 90 98

22

Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more

0 %

-

31.12.2025

0.5899

ex 2930 90 98

23

Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)

0 %

-

31.12.2023

0.7714

ex 2930 90 98

24

Phenyl vinyl sulfone (CAS RN 5535-48-8)

0 %

-

31.12.2024

0.2930

ex 2930 90 98

25

Thiophanate-methyl (ISO), (CAS RN 23564-05-8)

0 %

-

31.12.2023

0.6873

ex 2930 90 98

26

Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more

0 %

-

31.12.2025

0.6585

ex 2930 90 98

27

2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)

0 %

-

31.12.2024

0.8069

ex 2930 90 98

28

Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste or in its crystalline form, with

—	a purity of 74 % or more by weight and,

—	a maximum water content of 23 % by weight

0 %

-

31.12.2025

0.7859

ex 2930 90 98

29

4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.2933

ex 2930 90 98

30

4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)

0 %

-

31.12.2023

0.7833

ex 2930 90 98

31

(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.8152

ex 2930 90 98

32

2-Methoxy-N-[2-nitro-5-(phenylsulfanyl)phenyl]acetamide (CAS RN 63470-85-9) with a purity by weight of 96 % or more

0 %

-

31.12.2026

0.6584

ex 2930 90 98

33

2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)

0 %

-

31.12.2024

0.3811

ex 2930 90 98

35

Glutathione (CAS RN 70-18-8)

0 %

-

31.12.2026

0.7682

ex 2930 90 98

38

Allyl isothiocyanate (CAS RN 57-06-7)

0 %

-

31.12.2023

0.2928

ex 2930 90 98

40

3,3’-Thiodi(propionic acid) (CAS RN 111-17-1)

0 %

-

31.12.2023

0.6167

ex 2930 90 98

43

Trimethylsulfoxonium iodide (CAS RN 1774-47-6)

0 %

-

31.12.2023

0.2931

ex 2930 90 98

45

2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)

0 %

-

31.12.2024

0.7689

ex 2930 90 98

50

3-Mercaptopropionic acid (CAS RN 107-96-0)

0 %

-

31.12.2023

0.6617

ex 2930 90 98

53

Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)

0 %

-

31.12.2025

0.5114

ex 2930 90 98

55

Thiourea (CAS RN 62-56-6)

0 %

-

31.12.2025

0.2929

ex 2930 90 98

60

Methyl phenyl sulphide (CAS RN 100-68-5)

0 %

-

31.12.2023

0.4629

ex 2930 90 98

64

3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)

0 %

-

31.12.2024

0.5034

ex 2930 90 98

65

Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)

0 %

-

31.12.2022

0.4296

ex 2930 90 98

68

Clethodim (ISO) (CAS RN 99129-21-2)

0 %

-

31.12.2022

0.3986

ex 2930 90 98

77

4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)

0 %

-

31.12.2023

0.4187

ex 2930 90 98

78

4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)

0 %

-

31.12.2026

0.2999

ex 2930 90 98

80

Captan (ISO) (CAS RN 133-06-2)

0 %

-

31.12.2023

0.4694

ex 2930 90 98

81

Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)

3 %

-

31.12.2024

0.7985

ex 2930 90 98

88

1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more

0 %

-

31.12.2025

0.4094

ex 2930 90 98

89

Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates

0 %

-

31.12.2026

0.7070

ex 2930 90 98

93

1-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8)

0 %

-

31.12.2026

0.7078

ex 2930 90 98

95

N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6)

0 %

-

31.12.2026

0.7086

ex 2930 90 98

97

Diphenyl sulphone (CAS RN 127-63-9)

0 %

-

31.12.2026

0.5741

ex 2931 49 90

08

Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution

0 %

-

31.12.2022

0.5492

ex 2931 49 90

13

Trioctylphosphine oxide (CAS RN 78-50-2)

0 %

-

31.12.2026

0.6088

ex 2931 49 90

23

Di-tert-butylphosphane (CAS RN 819-19-2)

0 %

-

31.12.2023

0.5758

ex 2931 49 90

25

(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)

0 %

-

31.12.2022

0.3497

ex 2931 49 90

30

Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)

0 %

-

31.12.2023

0.7533

ex 2931 49 90

35

Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)

0 %

-

31.12.2023

0.2656

ex 2931 49 90

38

N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more

0 %

-

31.12.2024

0.5229

ex 2931 49 90

40

Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)

0 %

-

31.12.2026

0.4433

ex 2931 49 90

45

Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8)

0 %

-

31.12.2023

0.3492

ex 2931 49 90

48

Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)

0 %

-

31.12.2024

0.3987

ex 2931 49 90

55

3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)

0 %

-

31.12.2023

0.7709

ex 2931 59 90

50

2-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with a content by weight of 2-Chloroethylphosphonic acid of 65 % or more

0 %

-

31.12.2024

0.3504

ex 2931 90 00

03

Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane

0 %

-

31.12.2023

0.7354

ex 2931 90 00

10

(3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0)

0 %

-

31.12.2022

0.4515

ex 2931 90 00

15

Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl

0 %

-

31.12.2024

0.7320

ex 2931 90 00

20

Ferrocene (CAS RN 102-54-5)

0 %

-

31.12.2022

0.8051

ex 2931 90 00

23

Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7951

ex 2931 90 00

25

N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8063

ex 2931 90 00

28

Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.3499

ex 2931 90 00

33

Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)

0 %

-

31.12.2024

0.2654

ex 2931 90 00

35

N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)

0 %

-

31.12.2024

0.4121

ex 2931 90 00

50

Trimethylsilane (CAS RN 993-07-7)

0 %

-

31.12.2026

0.6917

ex 2931 90 00

63

Chloroethenyldimethylsilane (CAS RN 1719-58-0)

0 %

-

31.12.2022

0.6946

ex 2931 90 00

65

Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)

0 %

-

31.12.2022

0.3486

ex 2932 13 00

10

Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)

0 %

-

31.12.2023

0.4590

ex 2932 14 00

10

1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)

0 %

-

31.12.2024

0.3488

ex 2932 19 00

40

Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more

0 %

-

31.12.2024

0.4514

ex 2932 19 00

41

2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)

0 %

-

31.12.2024

0.7614

ex 2932 19 00

65

Tefuryltrione (ISO) (CAS RN 473278-76-1)

0 %

-

31.12.2023

0.3487

ex 2932 19 00

70

Furfurylamine (CAS RN 617-89-0)

0 %

-

31.12.2024

0.3611

ex 2932 19 00

75

Tetrahydro-2-methylfuran (CAS RN 96-47-9)

0 %

-

31.12.2023

0.5240

ex 2932 19 00

80

5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)

0 %

-

31.12.2026

0.2775

ex 2932 20 90

10

2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5)

0 %

-

31.12.2023

0.5257

ex 2932 20 90

15

Coumarin (CAS RN 91-64-5)

0 %

-

31.12.2026

0.7958

ex 2932 20 90

18

4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7984

ex 2932 20 90

23

1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more

0 %

-

31.12.2025

0.5611

ex 2932 20 90

40

(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)

0 %

-

31.12.2022

0.6094

ex 2932 20 90

45

2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)

0 %

-

31.12.2023

0.7283

ex 2932 20 90

50

L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5)

0 %

-

31.12.2022

0.7838

ex 2932 20 90

53

(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.2765

ex 2932 20 90

55

6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)

0 %

-

31.12.2023

0.4162

ex 2932 20 90

60

6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0)

0 %

-

31.12.2026

0.7812

ex 2932 20 90

63

Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5)

0 %

-

31.12.2024

0.6620

ex 2932 20 90

65

Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)

0 %

-

31.12.2025

0.4161

ex 2932 20 90

71

6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2)

0 %

-

31.12.2026

0.7599

ex 2932 20 90

75

3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6)

0 %

-

31.12.2023

0.3990

ex 2932 20 90

80

Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)

0 %

-

31.12.2023

0.4403

ex 2932 20 90

84

Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)

0 %

-

31.12.2023

0.3610

ex 2932 99 00

10

Bendiocarb (ISO) (CAS RN 22781-23-3)

0 %

-

31.12.2023

0.7202

ex 2932 99 00

13

(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1 ,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)

0 %

-

31.12.2026

0.5269

ex 2932 99 00

15

1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)

0 %

-

31.12.2026

0.7178

ex 2932 99 00

18

4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)

0 %

-

31.12.2026

0.7431

ex 2932 99 00

23

2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)

0 %

-

31.12.2022

0.5759

ex 2932 99 00

25

1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)

0 %

-

31.12.2022

0.7639

ex 2932 99 00

27

(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more

0 %

-

31.12.2023

0.7535

ex 2932 99 00

33

3-hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)

0 %

-

31.12.2023

0.8035

ex 2932 99 00

38

1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.6243

ex 2932 99 00

43

Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.5915

ex 2932 99 00

45

2-Butylbenzofuran (CAS RN 4265-27-4)

0 %

-

31.12.2024

0.7766

ex 2932 99 00

47

12H-[1]Benzofuro[3,2-c][1]benzoxepin-6-one (CAS RN 28763-77-1)

0 %

-

31.12.2024

0.4907

ex 2932 99 00

50

7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)

0 %

-

31.12.2023

0.6113

ex 2932 99 00

53

1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)

0 %

-

31.12.2023

0.6771

ex 2932 99 00

65

4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)

0 %

-

31.12.2025

0.7978

ex 2932 99 00

68

3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7930

ex 2932 99 00

73

5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.4063

ex 2932 99 00

75

3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)

0 %

-

31.12.2022

0.7936

ex 2932 99 00

78

Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.4106

ex 2932 99 00

80

1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)

0 %

-

31.12.2023

0.7954

ex 2932 99 00

83

6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3697

ex 2932 99 00

85

1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)

0 %

-

31.12.2023

0.7903

ex 2933 19 90

13

3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.6262

ex 2933 19 90

15

Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.7835

ex 2933 19 90

17

1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7918

ex 2933 19 90

23

Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.6261

ex 2933 19 90

25

3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)

0 %

-

31.12.2024

0.7836

ex 2933 19 90

27

3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.3699

ex 2933 19 90

30

3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)

0 %

-

31.12.2023

0.7811

ex 2933 19 90

33

Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine (1)

0 %

-

31.12.2024

0.3877

ex 2933 19 90

40

Edaravone (INN) (CAS RN 89-25-8)

0 %

-

31.12.2023

0.7938

ex 2933 19 90

43

tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7119

ex 2933 19 90

45

5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)

0 %

-

31.12.2026

0.8046

ex 2933 19 90

48

1-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3992

ex 2933 19 90

50

Fenpyroximate (ISO) (CAS RN 134098-61-6)

0 %

-

31.12.2024

0.4494

ex 2933 19 90

60

Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)

0 %

-

31.12.2024

0.7576

ex 2933 19 90

65

4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120-52-2)

0 %

-

31.12.2023

0.4404

ex 2933 19 90

70

4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)

0 %

-

31.12.2023

0.4084

ex 2933 21 00

50

1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)

0 %

-

31.12.2026

0.6835

ex 2933 21 00

55

1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)

0 %

-

31.12.2025

0.4088

ex 2933 21 00

60

DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)

0 %

-

31.12.2026

0.5115

ex 2933 21 00

80

5,5-Dimethylhydantoin (CAS RN 77-71-4)

0 %

-

31.12.2025

0.5972

ex 2933 29 90

15

Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)

0 %

-

31.12.2023

0.7527

ex 2933 29 90

18

2-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4)

0 %

-

31.12.2023

0.8150

ex 2933 29 90

20

tert-butyl (2S)-2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.7937

ex 2933 29 90

23

1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.5920

ex 2933 29 90

28

Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more

0 %

-

31.12.2023

0.5921

ex 2933 29 90

45

Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)

0 %

-

31.12.2023

0.2752

ex 2933 29 90

50

1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)

0 %

-

31.12.2023

0.6263

ex 2933 29 90

55

Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.5215

ex 2933 29 90

60

1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)

0 %

-

31.12.2026

0.7120

ex 2933 29 90

75

2,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)

0 %

-

31.12.2026

0.5821

ex 2933 29 90

80

Imazalil (ISO) (CAS RN 35554-44-0)

0 %

-

31.12.2022

0.6415

2933 39 50

Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)

0 %

-

31.12.2024

0.7186

ex 2933 39 99

10

2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)

0 %

-

31.12.2026

0.6462

ex 2933 39 99

11

2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)

0 %

-

31.12.2024

0.5608

ex 2933 39 99

12

2,3-Dichloropyridine (CAS RN 2402-77-9)

0 %

-

31.12.2022

0.6812

ex 2933 39 99

14

N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)

0 %

-

31.12.2022

0.4842

ex 2933 39 99

20

Copper pyrithione powder (CAS RN 14915-37-8)

0 %

-

31.12.2022

0.6545

ex 2933 39 99

21

Boscalid (ISO) (CAS RN 188425-85-6)

0 %

-

31.12.2024

0.4594

ex 2933 39 99

24

2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)

0 %

-

31.12.2024

0.3604

ex 2933 39 99

25

Imazethapyr (ISO) (CAS RN 81335-77-5)

0 %

-

31.12.2023

0.6813

ex 2933 39 99

26

2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)

0 %

-

31.12.2022

0.7091

ex 2933 39 99

27

Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)

0 %

-

31.12.2026

0.6368

ex 2933 39 99

28

Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)

0 %

-

31.12.2024

0.8068

ex 2933 39 99

30

4-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more

0 %

-

31.12.2025

0.6458

ex 2933 39 99

31

2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)

0 %

-

31.12.2024

0.5241

ex 2933 39 99

32

2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)

0 %

-

31.12.2026

0.7181

ex 2933 39 99

33

5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)

0 %

-

31.12.2026

0.3878

ex 2933 39 99

35

Aminopyralid (ISO) (CAS RN 150114-71-9)

0 %

-

31.12.2023

0.7296

ex 2933 39 99

36

1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)

0 %

-

31.12.2022

0.5230

ex 2933 39 99

37

Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)

0 %

-

31.12.2026

0.7348

ex 2933 39 99

38

(2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6)

0 %

-

31.12.2022

0.7349

ex 2933 39 99

39

2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4)

0 %

-

31.12.2022

0.7121

ex 2933 39 99

46

Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more

0 %

-

31.12.2026

0.4706

ex 2933 39 99

47

(-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)

0 %

-

31.12.2026

0.4749

ex 2933 39 99

48

Flonicamid (ISO) (CAS RN 158062-67-0)

0 %

-

31.12.2024

0.7352

ex 2933 39 99

51

2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8)

0 %

-

31.12.2022

0.5610

ex 2933 39 99

52

6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)

0 %

-

31.12.2023

0.4646

ex 2933 39 99

55

Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more

0 %

-

31.12.2024

0.5760

ex 2933 39 99

57

Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)

0 %

-

31.12.2022

0.7598

ex 2933 39 99

59

Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0)

0 %

-

31.12.2023

0.2750

ex 2933 39 99

60

2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)

0 %

-

31.12.2023

0.7584

ex 2933 39 99

61

6-Bromopyridin-2-amine (CAS RN 19798-81-3)

0 %

-

31.12.2023

0.7577

ex 2933 39 99

62

Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4)

0 %

-

31.12.2023

0.7617

ex 2933 39 99

64

Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8)

0 %

-

31.12.2023

0.3602

ex 2933 39 99

65

Acetamiprid (ISO) (CAS RN 135410-20-7)

0 %

-

31.12.2023

0.5946

ex 2933 39 99

67

(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)

0 %

-

31.12.2023

0.7616

ex 2933 39 99

68

1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more

0 %

-

31.12.2023

0.8223

ex 2933 39 99

69

Regorafenib (INN) (CAS RN 755037-03-7) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.5494

ex 2933 39 99

70

2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)

0 %

-

31.12.2026

0.7704

ex 2933 39 99

71

Diflufenican (ISO) (CAS RN 83164-33-4)

0 %

-

31.12.2024

0.7737

ex 2933 39 99

73

6-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride

0 %

-

31.12.2024

0.7844

ex 2933 39 99

74

4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.8072

ex 2933 39 99

75

Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.7813

ex 2933 39 99

76

Apalutamide (INN) (CAS RN 956104-40-8)

0 %

-

31.12.2024

0.5922

ex 2933 39 99

77

Imazamox (ISO) (CAS RN 114311-32-9)

0 %

-

31.12.2023

0.7818

ex 2933 39 99

78

Niraparib tosylate monohydrate (INNM) (CAS RN 1613220-15-7)

0 %

-

31.12.2024

0.7754

ex 2933 39 99

79

Avibactam (INN) – sodium (CAS RN 1192491-61-4)

0 %

-

31.12.2024

0.8074

ex 2933 39 99

80

Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7906

ex 2933 39 99

81

4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7866

ex 2933 39 99

82

Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a dry weight purity of 92 % or more

0 %

-

31.12.2024

0.7976

ex 2933 39 99

83

2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7925

ex 2933 39 99

84

Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.5129

ex 2933 39 99

85

2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)

0 %

-

31.12.2025

0.7981

ex 2933 39 99

86

3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7939

ex 2933 39 99

87

6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.8096

ex 2933 39 99

89

1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3603

ex 2933 49 10

10

Quinmerac (ISO) (CAS RN 90717-03-6)

0 %

-

31.12.2023

0.4525

ex 2933 49 10

20

3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)

0 %

-

31.12.2023

0.5761

ex 2933 49 10

30

Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)

0 %

-

31.12.2022

0.6339

ex 2933 49 10

40

4,7-Dichloroquinoline (CAS RN 86-98-6)

0 %

-

31.12.2024

0.6773

ex 2933 49 10

50

1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)

0 %

-

31.12.2025

0.7098

ex 2933 49 90

25

Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)

0 %

-

31.12.2026

0.4927

ex 2933 49 90

30

Quinoline (CAS RN 91-22-5)

0 %

-

31.12.2025

0.7524

ex 2933 49 90

45

6,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232-39-7)

0 %

-

31.12.2023

0.8037

ex 2933 49 90

55

2-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.3880

ex 2933 49 90

70

Quinolin-8-ol (CAS RN 148-24-3)

0 %

-

31.12.2023

0.4043

ex 2933 52 00

10

Malonylurea (barbituric acid) (CAS RN 67-52-7)

0 %

-

31.12.2026

0.7631

ex 2933 54 00

10

5,5'-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6)

0 %

-

31.12.2023

0.6468

ex 2933 59 95

10

6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)

0 %

-

31.12.2024

0.6151

ex 2933 59 95

13

2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)

0 %

-

31.12.2023

0.2578

ex 2933 59 95

15

Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)

0 %

-

31.12.2023

0.2745

ex 2933 59 95

20

2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)

0 %

-

31.12.2023

0.6763

ex 2933 59 95

21

N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)

0 %

-

31.12.2025

0.7370

ex 2933 59 95

22

6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6)

0 %

-

31.12.2022

0.7345

ex 2933 59 95

24

1-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8)

0 %

-

31.12.2022

0.7392

ex 2933 59 95

26

5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7)

0 %

-

31.12.2022

0.5912

ex 2933 59 95

27

2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)

0 %

-

31.12.2023

0.7810

ex 2933 59 95

28

6,8-Difluoro-1-(methylamino)-7-(4-methylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3-carboxylic acid (CAS RN 100276-37-7)

0 %

-

31.12.2024

0.8157

ex 2933 59 95

29

2-Amino-4-(4-methylpiperazin-1-yl) benzoic acid tert-butyl ester (CAS RN 1034975-35-3) with a purity by weight of 95 % or more

0 %

-

31.12.2026

0.3600

ex 2933 59 95

30

Mepanipyrim (ISO) (CAS RN 110235-47-7)

0 %

-

31.12.2023

0.6240

ex 2933 59 95

33

4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)

0 %

-

31.12.2024

0.6419

ex 2933 59 95

37

6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)

0 %

-

31.12.2024

0.8056

ex 2933 59 95

42

2-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.4704

ex 2933 59 95

45

1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)

0 %

-

31.12.2024

0.6677

ex 2933 59 95

47

6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more

0 %

-

31.12.2025

0.4699

ex 2933 59 95

50

2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)

0 %

-

31.12.2024

0.6987

ex 2933 59 95

52

6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more

0 %

-

31.12.2026

0.2744

ex 2933 59 95

60

2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)

0 %

-

31.12.2023

0.7578

ex 2933 59 95

63

1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0)

0 %

-

31.12.2023

0.4772

ex 2933 59 95

65

1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)

0 %

-

31.12.2024

0.7825

ex 2933 59 95

68

Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.2735

ex 2933 59 95

70

N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)

0 %

-

31.12.2023

0.5542

ex 2933 59 95

77

3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)

0 %

-

31.12.2022

0.7071

ex 2933 59 95

87

5-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)

0 %

-

31.12.2026

0.6774

ex 2933 69 80

13

Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more

0 %

-

31.12.2025

0.6621

ex 2933 69 80

15

2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)

0 %

-

31.12.2025

0.6951

ex 2933 69 80

17

Benzoguanamine (CAS RN 91-76-9)

0 %

-

31.12.2026

0.7721

ex 2933 69 80

23

1,3,5-tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)

0 %

-

31.12.2024

0.7600

ex 2933 69 80

27

Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0)

0 %

-

31.12.2023

0.7952

ex 2933 69 80

33

2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.5272

ex 2933 69 80

40

Troclosene sodium (INNM) (CAS RN 2893-78-9)

0 %

-

31.12.2026

0.7464

ex 2933 69 80

45

2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)

0 %

-

31.12.2023

0.5131

ex 2933 69 80

55

Terbutryn (ISO) (CAS RN 886-50-0)

0 %

-

31.12.2025

0.4957

ex 2933 69 80

60

Cyanuric acid (CAS RN 108-80-5)

0 %

-

31.12.2025

0.6127

ex 2933 69 80

65

1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)

0 %

-

31.12.2023

0.6477

ex 2933 69 80

75

Metamitron (ISO) (CAS RN 41394-05-2)

0 %

-

31.12.2024

0.3882

ex 2933 69 80

80

Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)

0 %

-

31.12.2023

0.6960

ex 2933 79 00

15

Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)

0 %

-

31.12.2026

0.7346

ex 2933 79 00

25

Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)

0 %

-

31.12.2022

0.4294

ex 2933 79 00

30

5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)

0 %

-

31.12.2022

0.7453

ex 2933 79 00

35

1-tert-butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8)

0 %

-

31.12.2023

0.8038

ex 2933 79 00

45

1-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.4524

ex 2933 79 00

50

6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)

0 %

-

31.12.2023

0.8203

ex 2933 79 00

55

(3S,4R)-3-amino-4-hydroxypyrrolidin-2-one hydrochloride (CAS RN 2446872-13-3) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.8212

ex 2933 79 00

65

1-Dodecyl-2-pyrrolidone (CAS RN 2687-96-9) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.4985

ex 2933 79 00

70

(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)

0 %

-

31.12.2025

0.3580

ex 2933 99 80

06

Metconazole (ISO) (CAS RN 125116-23-6) with a purity by weight of 98 % or more

0 %

-

31.12.2023

0.8156

ex 2933 99 80

07

4-(2-Oxo-2,3-dihydro-1H-benzimidazol-1-yl)butanoic acid (CAS RN 3273-68-5) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.8180

ex 2933 99 80

08

Prothioconazole (ISO) (CAS RN 178928-70-6) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.8202

ex 2933 99 80

09

5,7-Difluoro-2-(4-fluorophenyl)-1H-indole (CAS RN 901188-04-3) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.6563

ex 2933 99 80

11

Fenbuconazole (ISO) (CAS RN 114369-43-6)

0 %

-

31.12.2024

0.6564

ex 2933 99 80

12

Myclobutanil (ISO) (CAS RN 88671-89-0)

0 %

-

31.12.2024

0.5243

ex 2933 99 80

13

5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)

0 %

-

31.12.2026

0.6146

ex 2933 99 80

14

2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)

0 %

-

31.12.2023

0.2731

ex 2933 99 80

15

2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)

0 %

-

31.12.2023

0.6872

ex 2933 99 80

16

Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.6567

ex 2933 99 80

19

2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)

0 %

-

31.12.2024

0.2732

ex 2933 99 80

20

2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)

0 %

-

31.12.2023

0.6829

ex 2933 99 80

21

1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)

0 %

-

31.12.2025

0.6244

ex 2933 99 80

23

Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.5625

ex 2933 99 80

24

1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)

0 %

-

31.12.2022

0.8089

ex 2933 99 80

25

6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.6409

ex 2933 99 80

27

5,6-Dimethylbenzimidazole (CAS RN 582-60-5)

0 %

-

31.12.2024

0.3593

ex 2933 99 80

30

Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)

0 %

-

31.12.2023

0.6249

ex 2933 99 80

33

Penconazole (ISO) (CAS RN 66246-88-6)

0 %

-

31.12.2024

0.7043

ex 2933 99 80

34

2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)

0 %

-

31.12.2026

0.6958

ex 2933 99 80

36

3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)

0 %

-

31.12.2023

0.4695

ex 2933 99 80

37

8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)

0 %

-

31.12.2024

0.7045

ex 2933 99 80

38

(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)

0 %

-

31.12.2026

0.3591

ex 2933 99 80

40

trans-4-Hydroxy-L-proline (CAS RN 51-35-4)

0 %

-

31.12.2023

0.7273

ex 2933 99 80

41

5-[4'-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)

0 %

-

31.12.2022

0.7185

ex 2933 99 80

42

(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)

0 %

-

31.12.2026

0.3582

ex 2933 99 80

45

Maleic hydrazide (ISO) (CAS RN 123-33-1)

0 %

-

31.12.2023

0.7269

ex 2933 99 80

46

(S)-indoline-2-carboxylic acid (CAS RN 79815-20-6)

0 %

-

31.12.2022

0.5818

ex 2933 99 80

47

Paclobutrazol (ISO) (CAS RN 76738-62-0)

0 %

-

31.12.2022

0.7410

ex 2933 99 80

48

5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)

0 %

-

31.12.2022

0.5945

ex 2933 99 80

53

Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CAS RN 1441673-92-2) (5)

0 %

-

31.12.2023

0.6599

ex 2933 99 80

54

3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)

0 %

-

31.12.2025

0.4585

ex 2933 99 80

55

Pyridaben (ISO) (CAS RN 96489-71-3)

0 %

-

31.12.2024

0.7457

ex 2933 99 80

56

Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1)

0 %

-

31.12.2023

0.5901

ex 2933 99 80

57

2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)

0 %

-

31.12.2023

0.7649

ex 2933 99 80

58

Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more

0 %

-

31.12.2023

0.7673

ex 2933 99 80

59

Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9)

0 %

-

31.12.2023

0.7927

ex 2933 99 80

60

2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7624

ex 2933 99 80

61

(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1)

0 %

-

31.12.2023

0.7680

ex 2933 99 80

63

L-Prolinamide (CAS RN 7531-52-4)

0 %

-

31.12.2023

0.8032

ex 2933 99 80

65

1,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7839

ex 2933 99 80

66

(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.5468

ex 2933 99 80

67

Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)

0 %

-

31.12.2026

0.7679

ex 2933 99 80

68

5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)

0 %

-

31.12.2023

0.8053

ex 2933 99 80

69

5-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.7971

ex 2933 99 80

70

5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.4384

ex 2933 99 80

71

10-Methoxyiminostilbene (CAS RN 4698-11-7)

0 %

-

31.12.2023

0.4503

ex 2933 99 80

72

1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)

0 %

-

31.12.2023

0.7759

ex 2933 99 80

75

1-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide (CAS RN 94790-37-1)

0 %

-

31.12.2024

0.8054

ex 2933 99 80

76

2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8064

ex 2933 99 80

77

9-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.4382

ex 2933 99 80

78

3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)

0 %

-

31.12.2023

0.8014

ex 2933 99 80

80

Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.4164

ex 2933 99 80

81

1,2,3-Benzotriazole (CAS RN 95-14-7)

0 %

-

31.12.2026

0.4165

ex 2933 99 80

82

Tolytriazole (CAS RN 29385-43-1)

0 %

-

31.12.2023

0.6933

ex 2933 99 80

87

Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.3579

ex 2934 10 00

10

Hexythiazox (ISO) (CAS RN 78587-05-0)

0 %

-

31.12.2023

0.5531

ex 2934 10 00

15

4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)

0 %

-

31.12.2022

0.2725

ex 2934 10 00

20

2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)

0 %

-

31.12.2023

0.5530

ex 2934 10 00

25

(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)

0 %

-

31.12.2022

0.5538

ex 2934 10 00

35

(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)

0 %

-

31.12.2022

0.6264

ex 2934 10 00

45

2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)

0 %

-

31.12.2024

0.4750

ex 2934 10 00

60

Fosthiazate (ISO) (CAS RN 98886-44-3)

0 %

-

31.12.2024

0.7312

ex 2934 20 80

15

Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)

0 %

-

31.12.2022

0.4346

ex 2934 20 80

25

1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one

0 %

-

31.12.2022

0.4955

ex 2934 20 80

60

Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)

0 %

-

31.12.2022

0.4910

ex 2934 20 80

70

N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)

0 %

-

31.12.2025

0.5537

ex 2934 30 90

10

2-Methylthiophenothiazine (CAS RN 7643-08-5)

0 %

-

31.12.2022

0.6492

ex 2934 99 90

10

Fluralaner (INN) (CAS RN 864731-61-3)

0 %

-

31.12.2024

0.5924

ex 2934 99 90

12

Dimethomorph (ISO) (CAS RN 110488-70-5)

0 %

-

31.12.2023

0.3577

ex 2934 99 90

15

Carboxin (ISO) (CAS RN 5234-68-4)

0 %

-

31.12.2023

0.6476

ex 2934 99 90

16

Difenoconazole (ISO) (CAS RN 119446-68-3)

0 %

-

31.12.2024

0.7843

ex 2934 99 90

17

(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.4715

ex 2934 99 90

20

Thiophene (CAS RN 110-02-1)

0 %

-

31.12.2024

0.5263

ex 2934 99 90

23

Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)

0 %

-

31.12.2026

0.6241

ex 2934 99 90

24

Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.4942

ex 2934 99 90

25

2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)

0 %

-

31.12.2025

0.6252

ex 2934 99 90

26

4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)

0 %

-

31.12.2024

0.6362

ex 2934 99 90

27

2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)

0 %

-

31.12.2024

0.5242

ex 2934 99 90

28

11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)

0 %

-

31.12.2026

0.7837

ex 2934 99 90

29

(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.4700

ex 2934 99 90

30

Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)

0 %

-

31.12.2024

0.7840

ex 2934 99 90

33

(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.5813

ex 2934 99 90

37

4-Propan-2-ylmorpholine (CAS RN 1004-14-4)

0 %

-

31.12.2022

0.6824

ex 2934 99 90

39

4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)

0 %

-

31.12.2025

0.8094

ex 2934 99 90

40

2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.6823

ex 2934 99 90

41

11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)

0 %

-

31.12.2025

0.6922

ex 2934 99 90

42

1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)

0 %

-

31.12.2024

0.8176

ex 2934 99 90

43

Fludioxonil (ISO) (CAS RN 131341-86-1) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.6893

ex 2934 99 90

44

Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more

0 %

-

31.12.2025

0.5453

ex 2934 99 90

48

Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)

0 %

-

31.12.2026

0.7188

ex 2934 99 90

49

Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8)

0 %

-

31.12.2026

0.7259

ex 2934 99 90

52

Epoxiconazole (ISO) (CAS RN 133855-98-8)

0 %

-

31.12.2022

0.7311

ex 2934 99 90

54

2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone (CAS RN 119313-12-1)

0 %

-

31.12.2022

0.8031

ex 2934 99 90

55

Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7297

ex 2934 99 90

56

1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)

0 %

-

31.12.2022

0.7229

ex 2934 99 90

57

(6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1 -azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709-09-3)

0 %

-

31.12.2022

0.3575

ex 2934 99 90

58

Dimethenamide-P (ISO) (CAS RN 163515-14-8)

0 %

-

31.12.2023

0.7387

ex 2934 99 90

59

Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)

0 %

-

31.12.2022

0.2718

ex 2934 99 90

60

DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)

0 %

-

31.12.2023

0.7459

ex 2934 99 90

61

5-(1,2-dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)

0 %

-

31.12.2023

0.7536

ex 2934 99 90

62

(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8)

0 %

-

31.12.2023

0.7537

ex 2934 99 90

63

(2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)

0 %

-

31.12.2023

0.7449

ex 2934 99 90

64

2-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)

0 %

-

31.12.2023

0.7926

ex 2934 99 90

65

Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.4512

ex 2934 99 90

66

Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)

0 %

-

31.12.2023

0.7809

ex 2934 99 90

68

Afatinib dimaleate (INNM) (CAS RN 850140-73-7)

0 %

-

31.12.2024

0.7842

ex 2934 99 90

69

3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7944

ex 2934 99 90

70

1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7731

ex 2934 99 90

73

Tetrahydrouridine (CAS RN 18771-50-1)

0 %

-

31.12.2024

0.4249

ex 2934 99 90

74

2-Isopropylthioxanthone (CAS RN 5495-84-1)

0 %

-

31.12.2022

0.4052

ex 2934 99 90

75

(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)

0 %

-

31.12.2026

0.4058

ex 2934 99 90

ex 3204 20 00

76

10

2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)

0 %

-

31.12.2026

0.8221

ex 2934 99 90

77

Tazemetostat (INN) (CAS 1403254-99-8) with a purity by weight of 99 % or more and its salts

0 %

-

31.12.2026

0.7579

ex 2934 99 90

78

[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738-19-7)

0 %

-

31.12.2023

0.4388

ex 2934 99 90

79

Thiophen-2-ethanol (CAS RN 5402-55-1)

0 %

-

31.12.2023

0.7657

ex 2934 99 90

80

2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4)

0 %

-

31.12.2023

0.8048

ex 2934 99 90

81

1-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7815

ex 2934 99 90

82

Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.4643

ex 2934 99 90

83

Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more

0 %

-

31.12.2024

0.4645

ex 2934 99 90

84

Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more

0 %

-

31.12.2024

0.8222

ex 2934 99 90

85

Gilteritinib (INN) (CAS 1254053-43-4) with a purity by weight of 98 % or more and its salts

0 %

-

31.12.2026

0.5133

ex 2934 99 90

86

Dithianon (ISO) (CAS RN 3347-22-6)

0 %

-

31.12.2025

0.5136

ex 2934 99 90

87

2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)

0 %

-

31.12.2025

0.7738

ex 2934 99 90

88

(7S,9aS)-7-((benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine dioxalate (CAS RN 1268364-46-0)

0 %

-

31.12.2024

0.6486

ex 2935 90 90

10

Florasulam (ISO) (CAS RN 145701-23-1)

0 %

-

31.12.2024

0.3566

ex 2935 90 90

15

Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)

0 %

-

31.12.2023

0.8173

ex 2935 90 90

18

4-Amino-2,5-dimethoxy-N-methylbenzenesulfonamide (CAS RN 49701-24-8) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.8174

ex 2935 90 90

19

4-Amino-2,5-dimethoxy-N-phenylbenzenesulphonamide (CAS RN 52298-44-9) with a purity by weight of 98 % or more

0 %

-

31.12.2026

0.3565

ex 2935 90 90

20

Toluenesulphonamides

0 %

-

31.12.2023

0.8224

ex 2935 90 90

21

Encorafenib (INN) (CAS 1269440-17-6) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.5239

ex 2935 90 90

23

N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)

0 %

-

31.12.2026

0.3563

ex 2935 90 90

25

Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)

0 %

-

31.12.2023

0.5261

ex 2935 90 90

27

Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)

0 %

-

31.12.2026

0.5894

ex 2935 90 90

28

N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)

0 %

-

31.12.2023

0.7183

ex 2935 90 90

30

6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)

0 %

-

31.12.2026

0.7677

ex 2935 90 90

33

4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3)

0 %

-

31.12.2023

0.3564

ex 2935 90 90

35

Chlorsulfuron (ISO) (CAS RN 64902-72-3)

0 %

-

31.12.2023

0.7572

ex 2935 90 90

37

1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2)

0 %

-

31.12.2023

0.7438

ex 2935 90 90

40

Venetoclax (INN) (CAS 1257044-40-8)

0 %

-

31.12.2022

0.5036

ex 2935 90 90

42

Penoxsulam (ISO) (CAS RN 219714-96-2)

0 %

-

31.12.2025

0.6370

ex 2935 90 90

43

Oryzalin (ISO) (CAS RN 19044-88-3)

0 %

-

31.12.2024

0.7928

ex 2935 90 90

44

4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more

0 %

-

31.12.2025

0.3562

ex 2935 90 90

45

Rimsulfuron (ISO) (CAS RN 122931-48-0)

0 %

-

31.12.2023

0.6242

ex 2935 90 90

47

Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.5451

ex 2935 90 90

48

(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)

0 %

-

31.12.2026

0.2843

ex 2935 90 90

50

4,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)

0 %

-

31.12.2023

0.4636

ex 2935 90 90

53

2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)

0 %

-

31.12.2024

0.6777

ex 2935 90 90

54

Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.3560

ex 2935 90 90

55

Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)

0 %

-

31.12.2023

0.6802

ex 2935 90 90

56

N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)

0 %

-

31.12.2025

0.6903

ex 2935 90 90

57

N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)

0 %

-

31.12.2025

0.6664

ex 2935 90 90

59

Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more

0 %

-

31.12.2025

0.7676

ex 2935 90 90

60

4-[(3-Methylphenyl)amino]pyridine-3-sulfonamide (CAS RN 72811-73-5)

0 %

-

31.12.2023

0.4586

ex 2935 90 90

63

Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more

0 %

-

31.12.2024

0.3561

ex 2935 90 90

65

Tribenuron-methyl (ISO) (CAS RN 101200-48-0)

0 %

-

31.12.2023

0.7854

ex 2935 90 90

70

(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.5539

ex 2935 90 90

73

(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)

0 %

-

31.12.2022

0.3559

ex 2935 90 90

75

Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)

0 %

-

31.12.2023

0.8055

ex 2935 90 90

80

4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.2844

ex 2935 90 90

85

N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride

0 %

-

31.12.2024

0.3704

ex 2935 90 90

88

N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)

0 %

-

31.12.2023

0.4048

ex 2935 90 90

89

3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)

0 %

-

31.12.2026

0.4944

ex 2938 90 30

10

Ammonium glycyrrhizate (CAS RN 53956-04-0)

0 %

-

31.12.2025

0.3554

ex 2938 90 90

10

Hesperidin (CAS RN 520-26-3)

0 %

-

31.12.2023

0.5927

ex 2938 90 90

20

Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)

0 %

-

31.12.2023

0.7329

ex 2938 90 90

30

Rebaudioside A (CAS RN 58543-16-1)

0 %

-

31.12.2022

0.7327

ex 2938 90 90

40

Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages (1)

0 %

-

31.12.2022

0.8178

ex 2939 79 90

50

1-Alpha-H,5-alpha-H-Nortropan-3-alpha-ol (CAS RN 538-09-0) with a purity by weight of 99 % or more

0 %

-

31.12.2026

0.7456

ex 2939 79 90

60

4-methyl-2-pyridylamine (CAS RN 695-34-1) with a purity by weight of 98 % or more

0 %

-

31.12.2023

0.7047

ex 2940 00 00

30

D(+)- Trehalose dihydrate (CAS RN 6138-23-4)

0 %

-

31.12.2026

0.7757

ex 2940 00 00

50

2,3,4,6-Tetrakis-O-(phenylmethyl)-D-galactopyranose (CAS RN 6386-24-9)

0 %

-

31.12.2024

0.5233

ex 2941 20 30

10

Dihydrostreptomycin sulphate (CAS RN 5490-27-7)

0 %

-

31.12.2026

0.6984

ex 2942 00 00

10

Sodium triacetoxyborohydride (CAS RN 56553-60-7)

0 %

-

31.12.2026

0.3555

3201 20 00

Wattle extract

0 %

-

31.12.2023

0.7943

ex 3201 90 20

10

Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less

0 %

-

31.12.2025

0.3553

ex 3201 90 90

20

Tanning extracts derived from gambier and myrobalan fruits

0 %

-

31.12.2023

0.6600

ex 3201 90 90

ex 3202 90 00

40

10

Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)

0 %

-

31.12.2022

0.6183

ex 3204 11 00

15

Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight

0 %

-

31.12.2023

0.6277

ex 3204 11 00

25

N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)

0 %

-

31.12.2024

0.7307

ex 3204 11 00

35

Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 of 50 % or more by weight

0 %

-

31.12.2022

0.5235

ex 3204 11 00

40

Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight

0 %

-

31.12.2022

0.5134

ex 3204 11 00

45

Preparation of dispersion dyes, containing:

—	C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),

—	C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),

—	C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),

whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)

0 %

-

31.12.2025

0.5264

ex 3204 11 00

50

Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight

0 %

-

31.12.2022

0.5236

ex 3204 11 00

60

Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight

0 %

-

31.12.2022

0.5440

ex 3204 12 00

10

Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight

0 %

-

31.12.2022

0.6972

ex 3204 12 00

15

Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight

0 %

-

31.12.2026

0.6975

ex 3204 12 00

17

Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight

0 %

-

31.12.2026

0.7021

ex 3204 12 00

25

Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight

0 %

-

31.12.2026

0.6976

ex 3204 12 00

27

Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight

0 %

-

31.12.2026

0.6963

ex 3204 12 00

35

Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight

0 %

-

31.12.2026

0.6964

ex 3204 12 00

37

Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight

0 %

-

31.12.2026

0.5925

ex 3204 12 00

40

Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)

0 %

-

31.12.2023

0.6965

ex 3204 12 00

45

Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight

0 %

-

31.12.2026

0.6971

ex 3204 12 00

47

Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight

0 %

-

31.12.2026

0.6973

ex 3204 12 00

55

Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight

0 %

-

31.12.2026

0.6974

ex 3204 12 00

57

Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight

0 %

-

31.12.2026

0.6535

ex 3204 12 00

60

Colourant C.I. Acid Red 52 (CAS RN 3520-42-1 ) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight

0 %

-

31.12.2024

0.6977

ex 3204 12 00

65

Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight

0 %

-

31.12.2026

0.6652

ex 3204 12 00

70

Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight

0 %

-

31.12.2025

0.4065

ex 3204 13 00

10

Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight

0 %

-

31.12.2023

0.7394

ex 3204 13 00

15

Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight

0 %

-

31.12.2022

0.7395

ex 3204 13 00

25

Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight

0 %

-

31.12.2022

0.5804

ex 3204 13 00

30

Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight

0 %

-

31.12.2023

0.7396

ex 3204 13 00

35

Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 50 % or more by weight

0 %

-

31.12.2022

0.5805

ex 3204 13 00

40

Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight

0 %

-

31.12.2022

0.7398

ex 3204 13 00

45

Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 40 % or more by weight

0 %

-

31.12.2022

0.6474

ex 3204 13 00

50

Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight

0 %

-

31.12.2024

0.7775

ex 3204 13 00

55

Colourant C.I. Basic Violet 16 (CAS RN 6359-45-1) and preparations based thereon with a colourant C.I. Basic Violet 16 content of 60 % or more by weight

0 %

-

31.12.2024

0.6475

ex 3204 13 00

60

Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight

0 %

-

31.12.2024

0.7776

ex 3204 13 00

65

Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and preparations based thereon with a colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) content of 50 % or more but not more than 80 % by weight

0 %

-

31.12.2024

0.7777

ex 3204 13 00

70

Mixture of the colourants C.I. Basic Yellow 28 (CAS RN 54060-92-3), C.I. Basic Red 46 (CAS RN 12221-69-1) and C.I. Basic Blue 159 (CAS RN 105953-73-9) and preparations based thereon with a content of colourants C.I. Basic Yellow 28, C.I. Basic Red 46 and C.I. Basic Blue 159 taken together of 60 % or more by weight

0 %

-

31.12.2024

0.7778

ex 3204 13 00

75

Colourant C.I. Basic Red 18:1 (CAS RN 12271-12-4) and preparations based thereon with a content of 40 % or more by weight

0 %

-

31.12.2024

0.7779

ex 3204 13 00

80

Colourant C.I. Basic Yellow (CAS RN 83949-75-1) and preparations based thereon with a content of 40 % or more by weight

0 %

-

31.12.2024

0.6569

ex 3204 14 00

10

Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight

0 %

-

31.12.2024

0.6570

ex 3204 14 00

20

Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight

0 %

-

31.12.2024

0.6571

ex 3204 14 00

30

C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight

0 %

-

31.12.2024

0.3997

ex 3204 15 00

60

Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight

0 %

-

31.12.2023

0.6129

ex 3204 15 00

70

Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)

0 %

-

31.12.2023

0.6325

ex 3204 16 00

30

Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:

—	Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

—	1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

—	3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

0 %

-

31.12.2024

0.7367

ex 3204 16 00

40

Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0)

—	with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and

—	containing a preservative

0 %

-

31.12.2022

0.2517

ex 3204 17 00

10

Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight

0 %

-

31.12.2023

0.5433

ex 3204 17 00

15

Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight

0 %

-

31.12.2026

0.7092

ex 3204 17 00

18

Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight

0 %

-

31.12.2026

0.6130

ex 3204 17 00

19

Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight

0 %

-

31.12.2023

0.5505

ex 3204 17 00

20

Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight

0 %

-

31.12.2026

0.6279

ex 3204 17 00

21

Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight

0 %

-

31.12.2024

0.5259

ex 3204 17 00

22

Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight

0 %

-

31.12.2026

0.6246

ex 3204 17 00

23

Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)

0 %

-

31.12.2024

0.6453

ex 3204 17 00

24

Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight

0 %

-

31.12.2023

0.5427

ex 3204 17 00

25

Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight

0 %

-

31.12.2026

0.7261

ex 3204 17 00

26

Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight

0 %

-

31.12.2022

0.7391

ex 3204 17 00

29

Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight

0 %

-

31.12.2022

0.7659

ex 3204 17 00

31

Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight

0 %

-

31.12.2023

0.6603

ex 3204 17 00

33

Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight

0 %

-

31.12.2025

0.5426

ex 3204 17 00

35

Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight

0 %

-

31.12.2026

0.7565

ex 3204 17 00

37

Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight

0 %

-

31.12.2023

0.4630

ex 3204 17 00

40

Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight

0 %

-

31.12.2024

0.6452

ex 3204 17 00

45

Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight

0 %

-

31.12.2023

0.5832

ex 3204 17 00

75

Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight

0 %

-

31.12.2022

0.5645

ex 3204 17 00

80

Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight

0 %

-

31.12.2022

0.5700

ex 3204 17 00

85

Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight

0 %

-

31.12.2022

0.5680

ex 3204 17 00

88

Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight

0 %

-

31.12.2022

0.6979

ex 3204 19 00

13

Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight

0 %

-

31.12.2026

0.6406

ex 3204 19 00

14

Red colourant preparation, in a form of wet paste, containing by weight:

—	35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1)

—	not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9)

—	not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5)

—	55 % or more but not more than 65 % of water

0 %

-

31.12.2024

0.7262

ex 3204 19 00

16

Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight

0 %

-

31.12.2022

0.5100

ex 3204 19 00

73

Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight

0 %

-

31.12.2026

0.5282

ex 3204 19 00

77

Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight

0 %

-

31.12.2026

0.5671

ex 3204 19 00

84

Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight

0 %

-

31.12.2022

0.5395

ex 3204 20 00

30

Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight

0 %

-

31.12.2026

0.6473

ex 3204 90 00

10

Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight

0 %

-

31.12.2024

0.7326

ex 3204 90 00

20

Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % of a colourant C.I. Solvent Red 175

0 %

-

31.12.2022

0.3707

ex 3205 00 00

10

Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1)

0 %

-

31.12.2023

0.7658

ex 3205 00 00

20

Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:

—	16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2)

—	65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)

0 %

-

31.12.2023

0.7699

ex 3205 00 00

30

Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:

—	16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1)

—	65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)

0 %

-

31.12.2023

0.3550

ex 3206 11 00

10

Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate

0 %

-

31.12.2023

0.5378

ex 3206 19 00

10

Preparation containing by weight:

—	72 % (± 2 %) of mica (CAS RN 12001-26-2), and

—	28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)

0 %

-

31.12.2026

0.3551

ex 3206 42 00

10

Lithopone (CAS RN 1345-05-7)

0 %

-

31.12.2023

0.6245

ex 3206 49 70

20

Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)

0 %

-

31.12.2024

0.7305

ex 3206 49 70

30

Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a C.I. Pigment Black 12 content of 50 % or more by weight

0 %

-

31.12.2022

0.7390

ex 3206 49 70

40

Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight

0 %

-

31.12.2022

0.8211

ex 3206 49 70

50

Concentrated mixture of pigments (masterbatch) in the form of pellets containing by weight:

—	50 % or more but not more than 70 % of polyamide-6.6 (CAS RN 32131-17-2),

—	15 % or more but not more than 20 % of iron powder (CAS RN 7439-89-6),

—	5 % or more but not more than 15 % of barium sulphate (CAS RN 7727-43-7), and

—	5 % or more but not more than 10 % of blue pigment, consisting of a mixture of Titanium dioxide (CAS RN 13463-67-7) and Copper(II) phtalocyanine(CAS RN 147-14-8)

0 %

-

31.12.2026

0.3673

3206 50 00

Inorganic products of a kind used as luminophores

0 %

-

31.12.2023

0.6233

ex 3207 30 00

20

Printing paste containing

—	30 % by weight or more, but not more than 50 % of silver and

—	8 % by weight or more, but not more than 17 % of palladium

0 %

-

31.12.2024

0.5830

ex 3207 40 85

40

Glass flakes (CAS RN 65997-17-3):

—	of a thickness of 0,3 μm or more but not more than 10 μm, and

—	coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)

0 %

-

31.12.2022

0.2511

ex 3208 20 10

10

Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer

0 %

-

31.12.2023

0.4511

ex 3208 20 10

20

Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether

0 %

-

31.12.2023

0.8137

ex 3208 90 19

ex 3911 90 99

13

63

Mixture, containing by weight:

—	30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),

—	10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),

—	40 % or more, but not more than 55 % of ethanol (CAS RN 64-17-5),

—	1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)

0 %

-

31.12.2025

0.3967

ex 3208 90 19

15

Chlorinated polyolefins, in a solution

0 %

-

31.12.2023

0.5564

ex 3208 90 19

ex 3904 69 80

25

89

Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight

0 %

-

31.12.2022

0.2504

ex 3208 90 19

40

Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane

0 %

-

31.12.2023

0.6154

ex 3208 90 19

ex 3824 99 92

45

63

Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate

0 %

-

31.12.2023

0.6989

ex 3208 90 19

47

Solution containing by weight:

—	0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents

—	75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)

0 %

-

31.12.2026

0.2502

ex 3208 90 19

50

Solution containing by weight:

—	(65 ± 10) % of γ-butyrolactone,

—	(30 ± 10) % of polyamide resin,

—	(3,5 ± 1,5) % of naphthoquinone ester derivative and

—	(1,5 ± 0,5) % of arylsilicic acid

0 %

-

31.12.2023

0.6726

ex 3208 90 19

55

Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent

0 %

-

31.12.2026

0.4037

ex 3208 90 19

60

Copolymer of hydroxystyrene with one or more of the following:

—

styrene

—	alkoxystyrene

—	alkylacrylates

dissolved in ethyl lactate

0 %

-

31.12.2026

0.6005

ex 3208 90 19

65

Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants

0 %

-

31.12.2024

0.4301

ex 3208 90 19

75

Acenaphthalene copolymer in ethyl lactate solution

0 %

-

31.12.2022

0.5777

ex 3215 19 00

20

Ink:

—	consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

—	with a total solid content by weight of 55 % or more, but not more than 57 %, and

—	with a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

for use in the manufacture of electrodes (1)

0 %

l

31.12.2022

0.2506

ex 3215 90 70

10

Ink formulation, for use in the manufacture of ink-jet cartridges (1)

0 %

-

31.12.2023

0.2501

ex 3215 90 70

20

Heat sensitive ink fixed on a plastic film

0 %

-

31.12.2023

0.4533

ex 3215 90 70

30

Disposable cartridge ink, containing by weight:

—	1 % or more, but not more than 10 % of amorphous silicon dioxide or

—	3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

for use in the marking of integrated circuits (1)

0 %

-

31.12.2023

0.5031

ex 3215 90 70

40

Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:

—

wax

—	a vinyl-based polymer and

—	a colouring agent

for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1)

0 %

-

31.12.2025

0.3661

3301 12 10

Essential oil of orange, not deterpenated

0 %

-

31.12.2023

0.4863

ex 3402 39 90

10

Sodium lauroyl methyl isethionate

0 %

-

31.12.2026

0.4002

ex 3402 42 00

10

Vinyl copolymer surface active agent based on polypropylene glycol

0 %

-

31.12.2023

0.4277

ex 3402 42 00

20

Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated

0 %

-

31.12.2022

0.6285

ex 3402 90 10

10

Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides

0 %

-

31.12.2024

0.3660

ex 3402 90 10

20

Mixture of docusate sodium (INN) and sodium benzoate

0 %

-

31.12.2023

0.4676

ex 3402 90 10

70

Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)

0 %

-

31.12.2024

0.7508

ex 3501 90 90

10

Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules

0 %

-

31.12.2023

0.2498

ex 3506 91 90

10

Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)

0 %

-

31.12.2023

0.4003

ex 3506 91 90

30

Two component microencapsulated epoxy adhesive dispersed in a solvent

0 %

-

31.12.2023

0.4313

ex 3506 91 90

40

Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D 3330)

0 %

-

31.12.2024

0.6725

ex 3506 91 90

50

Preparation containing by weight:

—	15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and

—	10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,

dissolved in:

—	Methyl ethyl ketone (CAS RN 78-93-3),

—	Heptane (CAS RN 142-82-5), and

—	Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)

0 %

-

31.12.2023

0.7268

ex 3506 91 90

60

Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 25 % or more but not more than 35 %

0 %

l

31.12.2022

0.7267

ex 3506 91 90

70

Temporary wafer-bonding release in the form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight

0 %

l

31.12.2022

0.6293

ex 3507 90 90

10

Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products (1)

0 %

-

31.12.2024

0.7050

ex 3507 90 90

30

Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with

—	an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml ,

—	a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % and

—	a pH value of 6,5 or more, but not more than 8,5

0 %

-

31.12.2026

0.4922

ex 3601 00 00

10

Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators (1)

0 %

-

31.12.2026

0.7318

ex 3603 50 00

10

Igniters for gas generators with an overall maximum length of 20,34mm or more but not more than 29,4 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 7,54 mm (± 0,3 mm)

0 %

-

31.12.2022

0.7338

ex 3707 10 00

60

Sensitising emulsion, containing by weight:

—	not more than 5 % of photoacid generator,

—	2 % or more but not more than 50 % of phenolic resins, and

—	not more than 7 % of epoxy-containing derivatives,

dissolved in heptan-2-one and/or ethyllactate

0 %

-

31.12.2022

0.7994

ex 3801 10 00

20

Artificial graphite (CAS RN 7782-42-5) powder form, with:

—	specific surface area (measured by BET) of 0,8 m2/g (± 0,25),

—	tap density: 0,85 g/cm3 (± 0,10),

—	particle size represented by d50 value of 21,0 μm (± 2,0),

—	specific discharge capacity of 351,0 mAh/g (± 3,0),

—	initial efficiency of 94,0 % (± 2,0)

1,8 %

-

31.12.2022

0.7975

ex 3801 10 00

30

Artificial graphite in powder form, (CAS RN 7782-42-5) with:

—	with or without coating on the surface,

—	particle size represented by d50 value of 15 μm (± 4),

—	specific surface area (measured by BET) less than 3,5 m2/g,

—	tap density: 1,3 g/m3 (± 0,5),

—	specific Discharge Capacity of 348 mAh/g (± 13),

—	initial efficiency above 93,0 %

1,8 %

-

31.12.2022

0.5465

ex 3801 90 00

10

Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)

0 %

-

31.12.2026

0.6759

ex 3802 10 00

10

Mixture of activated carbon and polyethylene, in form of powder

0 %

-

31.12.2025

0.7368

ex 3802 10 00

40

Chemically activated carbon for the absorption and desorption of vapors, in a defined or irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to ASTM D 5228) (1)

0 %

-

31.12.2022

0.2987

3805 90 10

Pine oil

1,7 %

-

31.12.2023

0.2990

ex 3808 91 90

10

Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide

0 %

-

31.12.2023

0.2988

ex 3808 91 90

30

Preparation containing endospores or spores and protein crystals derived from either:

—	Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,

—	Bacillus thuringiensis subsp. kurstaki or,

—	Bacillus thuringiensis subsp. israelensis or,

—	Bacillus thuringiensis subsp. aizawai or,

—	Bacillus thuringiensis subsp. tenebrionis

0 %

-

31.12.2024

0.2983

ex 3808 91 90

40

Spinosad (ISO)

0 %

-

31.12.2023

0.5710

ex 3808 91 90

60

Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'-ethoxy- spinosyn L)

0 %

-

31.12.2022

0.6874

ex 3808 92 30

10

Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more (2)

0 %

-

31.12.2025

0.2986

ex 3808 92 90

10

Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale

0 %

-

31.12.2023

0.2984

ex 3808 92 90

30

Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:

—	24 % or more but not more than 26 % of pyrithione zinc (INN), or

—	39 % or more but not more than 41 % of pyrithione zinc (INN)

0 %

-

31.12.2023

0.4843

ex 3808 92 90

50

Preparations based on copper pyrithione (CAS RN 14915-37-8)

0 %

-

31.12.2024

0.4753

ex 3808 93 90

10

Preparation, in the form of granules, containing by weight:

—	38,8 % or more but not more than 41,2 % of Gibberellin A3, or

—	9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7

0 %

-

31.12.2024

0.5048

ex 3808 93 90

20

Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:

—	1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

of a kind used in plant growth regulators

0 %

-

31.12.2025

0.5030

ex 3808 93 90

30

Aqueous solution containing by weight:

—	1,8 % of sodium para-nitrophenolate,

—	1,2 % of sodium ortho-nitrophenolate,

—	0,6 % of sodium 5-nitroguaiacolate,

for use in the manufacture of a plant growth regulator (1)

0 %

-

31.12.2022

0.7413

ex 3808 93 90

60

Preparation in the form of tablets containing by weight:

—	0,55 % or more but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, and

—	less than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3)

for coating (1)

0 %

-

31.12.2022

0.6532

ex 3808 94 20

30

Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:

—	1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

—	1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

—	1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or

—	1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

0 %

-

31.12.2024

0.6000

ex 3808 99 90

20

Abamectin (ISO) (CAS RN 71751-41-2)

0 %

-

31.12.2023

0.2557

ex 3809 91 00

10

Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate

0 %

-

31.12.2023

0.4406

ex 3810 10 00

10

Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:

—	70 % or more, but not more than 90 % of tin

—	not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium

for use in the electro technical industry (1)

0 %

-

31.12.2023

0.4510

ex 3811 19 00

10

Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:

—	4,9 % of 1,2,4-trimethyl-benzene,

—	4,9 % of naphthalene, and

—	0,5 % of 1,3,5-trimethyl-benzene

0 %

-

31.12.2024

0.3448

ex 3811 21 00

10

Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils

0 %

-

31.12.2023

0.7223

ex 3811 21 00

11

Dispersing agent and oxidation inhibitor containing :

—	o-amino polyisobutylenephenol (CAS RN 78330-13-9),

—	more than 30 % by weight but not more than 50 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2023

0.6904

ex 3811 21 00

12

Dispersing agent containing :

—	esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),

—	35 % or more but not more than 55 % by weight of mineral oils, and

—	with a chlorine content of not more than 0,05 % by weight,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2025

0.6018

ex 3811 21 00

13

Additives containing :

—	borated magnesium (C16-C24) alkylbenzene sulphonates and

—	mineral oils,

having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.6906

ex 3811 21 00

14

Dispersing agent :

—	containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),

—	containing 35 % or more but not more than 55 % by weight of mineral oils,

—	with a chlorine content by weight of not more than 0,05 %,

—	having a total base number of less than 15,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2025

0.6907

ex 3811 21 00

16

Detergent containing :

—	Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)

—	40 % or more but not more than 60 % by weight of mineral oils and

—	having a total base number more than 120

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2025

0.6905

ex 3811 21 00

18

Detergent containing :

—	long chain alkyltoluene calcium sulphonates,

—	more than 30 % but not more than 50 % by weight of mineral oils, and

—	having a total base number of more than 310 but not more than 340,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2025

0.6430

ex 3811 21 00

19

Additives containing:

—	a polyisobutylene succinimide based mixture, and

—	more than 30 % but not more than 50 % by weight of mineral oils,

having a total base number of more than 40, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.3449

ex 3811 21 00

20

Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil

0 %

-

31.12.2023

0.8196

ex 3811 21 00

22

Additive consisting essentially of:

—	Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8),

—	25 % or more by weight, but not more than 40 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2026

0.8197

ex 3811 21 00

24

Additive consisting essentially of:

—	Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20,

—	45 % and more by weight and no more than 55 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2026

0.6012

ex 3811 21 00

25

Additives containing:

—	a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10 000 but not more than 20 000 , and

—	more than 15 %, but not more than 30 % by weight of mineral oils,

for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.8198

ex 3811 21 00

26

Additive consisting essentially of:

—	Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8),

—	7 % or more by weight but not more than 12 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2026

0.6022

ex 3811 21 00

27

Additives containing:

—	10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and

—	mineral oils,

for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.8199

ex 3811 21 00

28

Additive consisting essentially of:

—	Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8);

—	triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight,

—	O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds

—	10 % or more by weight but not more than 20 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2026

0.5717

ex 3811 21 00

30

Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

-

31.12.2022

0.8200

ex 3811 21 00

31

Additive consisting essentially of:

—	Phosphorodithioic acid, mixed O,O-bis (isobutyl and pentyl) esters, zinc salts (CAS RN 68457-79-4),

—	8 % or more by weight but not more than 15 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2026

0.8201

ex 3811 21 00

32

Additive consisting essentially of:

—	Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2),

—	4 % or more by weight but not more than 12 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2026

0.6013

ex 3811 21 00

33

Additives containing:

—	calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and

—	mineral oils,

having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils (1)

0 %

-

31.12.2024

0.6016

ex 3811 21 00

37

Additives containing:

—	a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and

—	more than 50 % but not more than 75 % by weight of mineral oils,

for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.6435

ex 3811 21 00

48

Additives containing

—	overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and

—	by weight more than 25 % but not more than 50 % of mineral oils,

having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.5727

ex 3811 21 00

50

Additives for lubricating oils,

—	based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

—	containing mineral oils,

used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

-

31.12.2022

0.6437

ex 3811 21 00

53

Additives containing:

—	overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and

—	by weight more than 40 % but not more than 60 % of mineral oils,

having a total base number of 280 or more but not more than 420,

for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.6434

ex 3811 21 00

55

Additives containing:

—	low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and

—	by weight more than 40 % but not more than 60 % of mineral oils,

having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.5724

ex 3811 21 00

60

Additives for lubricating oils, containing mineral oils,

—	based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

—	with a total base number (TBN) of 280 or more but not more than 320,

used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

-

31.12.2022

0.6431

ex 3811 21 00

63

Additives containing:

—	an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and

—	by weight more than 40 % but not more than 60 % of mineral oils,

having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.6429

ex 3811 21 00

65

Additives containing:

—	a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and

—	more than 35 % but not more than 50 % by weight of mineral oils,

having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.5711

ex 3811 21 00

70

Additives for lubricating oils,

—	containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

—	containing mineral oils,

—	with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

—	with a total base number (TBN) of more than 20,

used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

-

31.12.2022

0.6017

ex 3811 21 00

73

Additives containing:

—	borated succinimide compounds (CAS RN 134758-95-5),

—	mineral oils, and

—	having a total base number (TBN) greater than 40,

for use in the manufacture of additive mixtures for lubricating oils (1)

0 %

-

31.12.2023

0.6671

ex 3811 21 00

75

Additives containing:

—	Calcium (C10-C14) dialkylbenzenesulfonates,

—	more than 40 %, but not more than 60 % by weight of mineral oils,

with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2022

0.6669

ex 3811 21 00

77

Antifoam additives consisting of:

—	a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and

—	more than 50 % but not more than 80 % by weight of mineral oils,

for use in the manufacture of additive blends for lubricating oils (1)

0 %

-

31.12.2022

0.6666

ex 3811 21 00

80

Additives containing :

—	polyisobutylene aromatic polyamine succinimide,

—	more than 40 % but not more than 60 % by weight of mineral oils,

with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils (1)

0 %

-

31.12.2022

0.6498

ex 3811 21 00

83

Additives containing:

—	polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

—	more than 31,9 % but not more than 43,3 % by weight of mineral oils,

—	not more than 0,05 % by weight chlorine, and

—	having a total base number (TBN) greater than 20,

for use in the manufacture of additives blends for lubricating oils (1)

0 %

-

31.12.2024

0.5718

ex 3811 21 00

85

Additives:

—	containing more than 20 % but not more than 45 % by weight of mineral oils,

—	based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,

for use in the manufacture of blends of additives (1)

0 %

-

31.12.2022

0.6438

ex 3811 29 00

15

Additives containing :

—	products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) and

—	more than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,

for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.7512

ex 3811 29 00

18

Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils (1)

0 %

-

31.12.2023

0.5721

ex 3811 29 00

20

Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils

0 %

-

31.12.2022

0.6432

ex 3811 29 00

25

Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases (1)

0 %

-

31.12.2024

0.5723

ex 3811 29 00

30

Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

-

31.12.2022

0.6433

ex 3811 29 00

35

Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.5728

ex 3811 29 00

40

Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils

0 %

-

31.12.2022

0.6436

ex 3811 29 00

45

Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.5719

ex 3811 29 00

50

Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

-

31.12.2022

0.6668

ex 3811 29 00

65

Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils (1)

0 %

-

31.12.2022

0.6020

ex 3811 29 00

70

Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.7205

ex 3811 29 00

75

Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (1)

0 % (1)

-

31.12.2023

0.6021

ex 3811 29 00

80

Additives containing :

—	more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and

—	more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),

for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.6023

ex 3811 29 00

85

Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils (1)

0 %

-

31.12.2024

0.3730

ex 3811 90 00

10

Dinonylnaphthylsulphonic acid salt, in a mineral oil solution

0 %

-

31.12.2023

0.5565

ex 3811 90 00

40

Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol

0 %

-

31.12.2022

0.7204

ex 3811 90 00

50

Corrosion inhibitor containing :

—	polyisobutenyl succinic acid and

—	more than 5 % and not more than 20 % by weight of mineral oils

for use in the manufacture of blends of additives for fuels (1)

0 %

-

31.12.2026

0.5147

ex 3812 10 00

10

Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)

0 %

-

31.12.2026

0.6045

ex 3812 20 90

10

Plasticiser, containing:

—	bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)

—	more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)

0 %

-

31.12.2023

0.3444

ex 3812 39 90

20

Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate

0 %

-

31.12.2023

0.6055

ex 3812 39 90

25

UV photo stabiliser containing:

—	α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);

—	α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);

—	polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)

—	bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and

—	methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)

0 %

-

31.12.2023

0.3446

ex 3812 39 90

30

Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol

0 %

-

31.12.2024

0.6054

ex 3812 39 90

35

Mixture containing by weight:

—	25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)

—	not more than 20 % of other organic compounds

—	on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)

0 %

-

31.12.2023

0.4861

ex 3812 39 90

40

Mixture of:

—	80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and

—	20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3)

0 %

-

31.12.2023

0.5477

ex 3812 39 90

55

UV-stabilizer, containing:

—	2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

—	either N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

—	N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

0 %

-

31.12.2026

0.5483

ex 3812 39 90

65

Stabiliser for plastic material containing:

—	2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

—	2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

—	2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

0 %

-

31.12.2026

0.5372

ex 3812 39 90

70

Light stabiliser containing:

—	branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

—	1-methoxy-2-propyl acetate (CAS RN 108-65-6)

0 %

-

31.12.2022

0.5822

ex 3812 39 90

80

UV-stabilizer, consisting of:

—	a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and

—	either an o-hydroxyphenyl triazine UV light absorber or

—	a chemically modified phenolic compound

0 %

-

31.12.2022

0.3441

ex 3814 00 90

20

Mixture containing by weight:

—	69 % or more but not more than 71 % of 1-methoxypropan-2-ol (CAS RN 107-98-2),

—	29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate (CAS RN 108-65-6)

0 %

-

31.12.2023

0.3731

ex 3814 00 90

40

Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether

0 %

-

31.12.2023

0.2800

ex 3815 12 00

10

Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver

0 %

-

31.12.2023

0.7574

ex 3815 12 00

20

Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with

—	a diameter of 1,4 mm or more but not more than 2,0 mm, and

—	a platinum content by weight of 0,2 % or more but not more than 0,5 %

0 %

-

31.12.2023

0.7585

ex 3815 12 00

30

Catalyst

—	containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,

—	deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide, the honeycomb structure having:

—	a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,

—	62 cells per cm2 or more, but not more than 140 cells per cm2 ,

—	a diameter of 100 mm or more, but not more than 120 mm, and

—	a length of 60 mm or more, but not more than 150 mm,

for use in the production of motor vehicles (1)

0 %

-

31.12.2023

0.5508

ex 3815 19 90

10

Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)

0 %

-

31.12.2026

0.2799

ex 3815 19 90

15

Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrileh (1)

0 %

-

31.12.2023

0.2798

ex 3815 19 90

20

Catalyst,

—	in the form of solid spheres,

—	of a diameter of 4 mm or more but not more than 12 mm, and

—	consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,

for use in the manufacture of acrylic acid (1)

0 %

-

31.12.2023

0.6049

ex 3815 19 90

25

Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde (1)

0 %

-

31.12.2023

0.3435

ex 3815 19 90

30

Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1)

0 %

-

31.12.2023

0.7566

ex 3815 19 90

35

Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder

0 %

-

31.12.2023

0.2792

ex 3815 19 90

65

Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide

0 %

-

31.12.2023

0.2791

ex 3815 19 90

70

Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide

0 %

-

31.12.2023

0.2790

ex 3815 19 90

75

Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide

0 %

-

31.12.2023

0.2793

ex 3815 19 90

80

Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil

0 %

-

31.12.2023

0.2788

ex 3815 19 90

85

Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder

0 %

-

31.12.2023

0.3899

ex 3815 19 90

86

Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1)

0 %

-

31.12.2023

0.4005

ex 3815 90 90

16

Initiator based on dimethylaminopropyl urea

0 %

-

31.12.2022

0.5704

ex 3815 90 90

18

Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO')-, di[chloride(1-)] (CAS RN 1217890-37-3), used to accelerate chemical oxidation or bleaching

0 %

-

31.12.2022

0.7528

ex 3815 90 90

25

Catalyst consisting by weight of:

—	30 % or more but not more than 33 % of bis(4-(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and

—	24 % or more but not more than 27 % of diphenyl(4-phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8)

in propylene carbonate (CAS RN 108-32-7)

0 %

-

31.12.2023

0.5062

ex 3815 90 90

30

Catalyst, consisting of a suspension in mineral oil of:

—	tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and

—	silicon dioxide,

—	containing 6,6 % (± 0,6 %) by weight of magnesium, and

—	containing 2,3 % (± 0,2 %) by weight of titanium

0 %

-

31.12.2025

0.7526

ex 3815 90 90

35

Catalyst containing by weight:

—	25 % or more but not more than 27,5 % of bis[4-(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and

—	20 % or more but not more than 22,5 % of diphenyl(4-phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0)

in propylene carbonate (CAS RN 108-32-7)

0 %

-

31.12.2023

0.7998

ex 3815 90 90

38

Photoinitiator, containing by weight:

—	80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),

—	not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate

0 %

-

31.12.2025

0.6006

ex 3815 90 90

40

Catalyst:

—	containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

—	in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

for use in the manufacture of acrylic acid (1)

0 %

-

31.12.2023

0.7243

ex 3815 90 90

43

Catalyst in powder form consisting by weight of

—	92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7),

—	5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and

—	2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9)

0 %

-

31.12.2022

0.7999

ex 3815 90 90

48

Photoinitiator containing by weight:

—	88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),

—	not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)

0 %

-

31.12.2025

0.3433

ex 3815 90 90

50

Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium

0 %

-

31.12.2023

0.2783

ex 3815 90 90

80

Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol

0 %

-

31.12.2025

0.3430

ex 3815 90 90

81

Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate

0 %

-

31.12.2023

0.2782

ex 3815 90 90

85

Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1)

0 %

-

31.12.2022

0.2909

ex 3815 90 90

86

Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide

0 %

-

31.12.2023

0.3732

ex 3815 90 90

88

Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:

—	4 % or more but not more than 10 % of titanium and

—	10 % or more but not more than 20 % magnesium

0 %

-

31.12.2023

0.3733

ex 3815 90 90

89

Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)

0 %

-

31.12.2026

0.4408

ex 3817 00 50

10

Mixture of alkylbenzenes (C14-26) containing by weight:

—	35 % or more but not more than 60 % of eicosylbenzene,

—	25 % or more but not more than 50 % of docosylbenzene,

—	5 % or more but not more than 25 % of tetracosylbenzene

0 %

-

31.12.2023

0.3427

ex 3817 00 80

10

Mixture of alkylnaphthalenes, containing by weight:

—	88 % or more but not more than 98 % of hexadecylnaphthalene

—	2 % or more but not more than 12 % of dihexadecylnaphthalene

0 %

-

31.12.2023

0.4581

ex 3817 00 80

20

Mixture of branched alkyl benzenes mainly containing dodecyl benzenes

0 %

-

31.12.2023

0.5479

ex 3817 00 80

30

Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms

0 %

-

31.12.2026

0.4006

ex 3819 00 00

20

Fire resistant hydraulic fluid based on phosphate ester

0 %

-

31.12.2023

0.7922

ex 3823 19 10

20

12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (1)

0 %

-

31.12.2024

0.6038

ex 3823 19 30

20

30

Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:

—	industrial monocarboxylic fatty acids of heading 3823 ,

—	stearic acid of heading 3823 ,

—	stearic acid of heading 2915 ,

—	palmitic acid of heading 2915 , or

—	animal feed preparations of heading 2309 (1)

0 %

-

31.12.2023

0.6037

ex 3823 19 90

20

30

Palm acid oils from refining for use in the manufacture of:

—	industrial monocarboxylic fatty acids of heading 3823 ,

—	stearic acid of heading 3823 ,

—	stearic acid of heading 2915 ,

—	palmitic acid of heading 2915 , or

—	animal feed preparations of heading 2309 (1)

0 %

-

31.12.2023

0.2908

ex 3824 99 15

10

Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets

0 %

-

31.12.2023

0.6810

ex 3824 99 92

23

Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol

0 %

-

31.12.2025

0.7321

ex 3824 99 92

26

Preparation containing by weight:

—	60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5)

—	15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and

—	10 % or more but not more than 15 % of 2-sec-butylphenol (CAS RN 89-72-5)

0 %

-

31.12.2022

0.4909

ex 3824 99 92

29

Preparation containing by weight:

—	85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and

—	1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate

0 %

-

31.12.2025

0.7618

ex 3824 99 92

31

Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules (1)

0 %

-

31.12.2023

0.4707

ex 3824 99 92

32

Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)

0 %

-

31.12.2024

0.3083

ex 3824 99 92

ex 3824 99 93

ex 3824 99 96

33

40

Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:

—	on a support of mineral wax, whether or not modified chemically, or

—	in the form of a solution in an organic solvent

0 %

-

31.12.2023

0.4153

ex 3824 99 92

35

Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate

0 %

-

31.12.2023

0.4523

ex 3824 99 92

37

Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4)

0 %

-

31.12.2023

0.7722

ex 3824 99 92

38

Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)

0 %

-

31.12.2024

0.4152

ex 3824 99 92

39

Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol

0 %

-

31.12.2023

0.6779

ex 3824 99 92

40

Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent

0 %

-

31.12.2025

0.6091

ex 3824 99 92

42

Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene

0 %

-

31.12.2023

0.7724

ex 3824 99 92

43

Preparation containing by weight:

—	65 % or more, but not more than 95 % of isopropylated triaryl phosphate (CAS RN 68937-41-7) and

—	5 % or more, but not more than 35 % of triphenyl phosphate (CAS RN 115-86-6)

0 %

-

31.12.2024

0.3067

ex 3824 99 92

45

Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1)

0 %

-

31.12.2023

0.5475

ex 3824 99 92

47

Preparation, containing:

—	trioctylphosphine oxide (CAS RN 78-50-2),

—	dioctylhexylphosphine oxide (CAS RN 31160-66-4),

—	octyldihexylphosphine oxide (CAS RN 31160-64-2) and

—	trihexylphosphine oxide (CAS RN 3084-48-8)

0 %

-

31.12.2022

0.4279

ex 3824 99 92

49

Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)

0 %

-

31.12.2022

0.4292

ex 3824 99 92

50

Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1)

0 %

-

31.12.2022

0.3065

ex 3824 99 92

51

Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid

0 %

-

31.12.2023

0.7742

ex 3824 99 92

52

Electrolyte containing:

—	5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),

—	60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),

—	0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),

for use in the manufacture of motor vehicle batteries (1)

3,2 %

-

31.12.2022

0.3061

ex 3824 99 92

53

Preparations consisting predominantly of ethylene glycol and:

—	either diethylene glycol, dodecanedioic acid and ammonia water,

—	or N,N-dimethylformamide,

—	or γ-butyrolactone,

—	or silicon oxide,

—	or ammonium hydrogen azelate,

—	or ammonium hydrogen azelate and silicon oxide,

—	or dodecanedioic acid, ammonia water and silicon oxide,

for the manufacture of electrolytic capacitors (1)

0 %

-

31.12.2023

0.4434

ex 3824 99 92

54

Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)

0 %

-

31.12.2026

0.6025

ex 3824 99 92

55

Additives for paints and coatings, containing:

—	a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and

—	30 % or more but not more than 35 % by weight of isobutyl alcohol

0 %

-

31.12.2023

0.4431

ex 3824 99 92

56

Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units

0 %

-

31.12.2024

0.4425

ex 3824 99 92

57

Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units

0 %

-

31.12.2024

0.6067

ex 3824 99 92

59

Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran

0 %

-

31.12.2023

0.5050

ex 3824 99 92

61

3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine

0 %

-

31.12.2025

0.7831

ex 3824 99 92

62

Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane

0 %

-

31.12.2024

0.3122

ex 3824 99 92

65

Mixture of primary tert-alkylamines

0 %

-

31.12.2024

0.6720

ex 3824 99 92

68

Preparation containing by weight:

—	20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)

Dissolved in:

—	10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)

—	64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and

—	6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)

0 %

-

31.12.2025

0.6719

ex 3824 99 92

69

Preparation containing by weight:

—	80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

—	7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

—	not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

0 %

-

31.12.2026

0.4409

ex 3824 99 92

70

Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine

0 %

-

31.12.2024

0.6198

ex 3824 99 92

72

N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)

0 %

-

31.12.2023

0.6114

ex 3824 99 92

76

Preparation containing:

—	74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and

—	10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)

0 %

-

31.12.2023

0.5834

ex 3824 99 92

80

Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)

0 %

-

31.12.2022

0.6546

ex 3824 99 92

82

T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene

0 %

-

31.12.2024

0.3074

ex 3824 99 92

84

Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:

—	either an aluminium-alkyl compound,

—	or an organic complex of tungsten

—	or an organic complex of molybdenum

0 %

-

31.12.2023

0.3069

ex 3824 99 92

88

2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)

0 %

-

31.12.2025

0.8083

ex 3824 99 92

92

Solution consisting of:

—	50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and

—	50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)

0 %

-

31.12.2025

0.8121

ex 3824 99 92

93

Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives

3,2 %

-

31.12.2022

0.5961

ex 3824 99 93

30

Powder Mixture containing by weight:

—	85 % or more of zinc diacrylate (CAS RN 14643-87-9),

—	not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and

—	not more than 10 % of zinc stearate (CAS RN 557-05-1)

0 %

-

31.12.2024

0.4719

ex 3824 99 93

35

Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)

0 %

-

31.12.2024

0.7379

ex 3824 99 93

38

Mixture of 4,4'-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4'-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9)

0 %

-

31.12.2022

0.4527

ex 3824 99 93

42

Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea

0 %

-

31.12.2023

0.7153

ex 3824 99 93

45

Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:

—	not more than 20 % of disodium sulphate, and

—	not more than 10 % of sodium chloride

0 %

-

31.12.2026

0.7786

ex 3824 99 93

48

Nonhalogenated flame retardant containing by weight:

—	50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1),

—	35 % or more, but not more than 45 % of a phosphoric acid derivative and

—	not more than 6 % of zinc oxide (CAS RN 1314-13-2)

0 %

-

31.12.2024

0.8062

ex 3824 99 93

51

Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more

0 %

-

31.12.2025

0.6215

ex 3824 99 93

53

Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder

0 %

-

31.12.2023

0.7497

ex 3824 99 93

60

Mixture of phytosterols (CAS RN 949109-75-5) in powder form containing by weight:

—	40 % or more but not more than 88 % of sitosterols,

—	20 % or more but not more than 63 % of campesterols,

—	14 % or more but not more than 38 % of stigmasterols,

—	not more than 13 % brassicasterols, and

—	not more than 5 % sitostanols

0 %

-

31.12.2023

0.4290

ex 3824 99 93

63

Mixture of phytosterols, not in the form of powder, containing by weight:

—	75 % or more of sterols,

—	not more than 25 % of stanols,

for use in the manufacture of stanols/sterols or stanol/sterol esters (1)

0 %

-

31.12.2022

0.7460

ex 3824 99 93

65

Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene

0 %

-

31.12.2023

0.3117

ex 3824 99 93

70

Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)

0 %

-

31.12.2024

0.3112

ex 3824 99 93

75

Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols

0 %

-

31.12.2024

0.5817

ex 3824 99 93

ex 3824 99 96

83

85

Preparation containing:

—	C,C'-azodi(formamide) (CAS RN 123-77-3),

—	magnesium oxide (CAS RN 1309-48-4) and

—	zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C

0 %

-

31.12.2023

0.3049

ex 3824 99 93

ex 3824 99 96

85

57

Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

0 %

-

31.12.2023

0.4336

ex 3824 99 93

88

Mixture of phytosterols containing by weight:

—	60 % or more, but not more than 80 % of sitosterols,

—	less than 15 % of campesterols,

—	less than 5 % of stigmasterols, and

—	less than 15 % of betasitostanols

0 %

-

31.12.2022

0.7420

ex 3824 99 96

30

Rare-earth concentrate containing by weight:

—	20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3),

—	2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8),

—	10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), and

—	not more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide

0 %

-

31.12.2022

0.7611

ex 3824 99 96

33

Buffer cartridge not exceeding 8 000 ml containing:

—	0,05 % or more but not more than 0,1 % by weight of 5-Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9) and

—	0,05 % or more but not more that 0,1 % by weight of 2-Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682-20-4) as a biostatic

0 %

-

31.12.2023

0.3078

ex 3824 99 96

35

Calcined bauxite (refractory grade)

0 %

-

31.12.2023

0.4542

ex 3824 99 96

37

Structured silica alumina phosphate

0 %

-

31.12.2024

0.7313

ex 3824 99 96

45

Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:

—	a particle size of less than 10 μm,

—	a purity by weight of more than 98 %

3,2 %

-

31.12.2022

0.6628

ex 3824 99 96

46

Manganese zinc ferrite granulate, containing by weight:

—	52 % or more but not more than 76 % of iron(III)oxide,

—	13 % or more but not more than 42 % of manganese oxide, and

—	2 % or more but not more than 22 % of zinc oxide

0 %

-

31.12.2025

0.3064

ex 3824 99 96

47

Mixed metals oxides, in the form of powder, containing by weight:

—	either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

—	or 30 % or more of lead and 5 % or more of niobium,

for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1)

0 %

-

31.12.2023

0.6749

ex 3824 99 96

48

Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %

0 %

-

31.12.2025

0.5607

ex 3824 99 96

50

Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators

0 %

-

31.12.2022

0.6145

ex 3824 99 96

55

Carrier in powder form, consisting of:

—	ferrite (Iron oxide) (CAS RN 1309-37-1)

—	manganese oxide (CAS RN 1344-43-0)

—	magnesium oxide (CAS RN 1309-48-4)

—	styrene acrylate copolymer

to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1)

0 %

-

31.12.2023

0.5141

ex 3824 99 96

60

Fused magnesia containing by weight 15 % or more of dichromium trioxide

0 %

-

31.12.2026

0.3050

ex 3824 99 96

65

Aluminium sodium silicate, in the form of spheres of a diameter of:

—	either 1,6 mm or more but not more than 3,4 mm,

—	or 4 mm or more but not more than 6 mm

0 %

-

31.12.2023

0.8122

ex 3824 99 96

68

Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight:

—	less than 5 % of lithium hydroxide (CAS RN 1310-65-2),

—	less than 5 % of lithium carbonate (CAS RN 554-13-2), and

—	less than 15 % of nickel oxide (CAS RN 11099-02-8)

3,2 %

-

31.12.2022

0.3119

ex 3824 99 96

73

Reaction product, containing by weight:

—	1 % or more but not more than 40 % of molybdenum oxide,

—	10 % or more but not more than 50 % of nickel oxide,

—	30 % or more but not more than 70 % of tungsten oxide

0 %

-

31.12.2024

0.7010

ex 3824 99 96

74

Mixture with a non-stoichiometric composition:

—	with a crystalline structure,

—	with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

0 %

-

31.12.2026

0.7147

ex 3824 99 96

80

Mixture consisting of:

—	64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)

—	25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and

—	not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

0 %

-

31.12.2026

0.7553

ex 3824 99 96

83

Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2)

0 %

-

31.12.2023

0.5820

ex 3824 99 96

87

Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:

—	0,1 % or more but not more than 1 % of platinum, and

—	0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

0 %

-

31.12.2022

0.5939

ex 3826 00 10

20

29

Mixture of fatty acid methyl esters containing by weight at least:

—	65 % or more but not more than 75 % of C12 FAME,

—	21 % or more but not more than 28 % of C14 FAME,

—	4 % or more but not more than 8 % of C16 FAME,

for use in the manufacture of detergents and home and personal care products (1)

0 %

-

31.12.2023

0.5941

ex 3826 00 10

50

59

Mixture of fatty acid methyl esters containing by weight at least:

—	50 % or more but not more than 58 % of C8-FAME

—	35 % or more but not more than 50 % of C10-FAME

for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid (1)

0 %

-

31.12.2023

0.7756

ex 3827 68 00

05

Mixture of halogenated derivatives containing by weight:

—	30 % or more but not more than 60 % of difluoromethane (CAS RN 75-10-5),

—	30 % or more but not more than 60 % of trifluoroiodomethane (CAS RN 2314-97-8),

—	10 % or more but not more than 30 % of pentafluoroethane (CAS RN 354-33-6)

0 %

-

31.12.2024

0.6132

ex 3901 10 10

ex 3901 40 00

20

10

High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with

—	a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and

—	a density (ASTM D 1505 ) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and

—	a vicat softening temperature of min. 94 °C

0 %

m3

31.12.2024

0.5142

ex 3901 10 90

30

Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper

0 %

-

31.12.2026

0.6897

ex 3901 40 00

30

Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:

—	more than 10 % but not more than 20 % by weight of copolymer,

—	a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and

—	a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,

for use in the co-extrusion processing of films for flexible food packaging (1)

0 %

m3

31.12.2025

0.6920

ex 3901 90 80

53

Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:

—	an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and

—	a melt flow rate of 10g/10 min or more (125°C/2,16 kg, ASTM D1238)

0 %

m3

31.12.2025

0.6734

ex 3901 90 80

55

Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:

—	an acrylic acid content of 6 % or more but not more than 50 % by weight, and

—	a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

0 %

-

31.12.2025

0.5049

ex 3901 90 80

67

Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more

0 %

-

31.12.2025

0.6998

ex 3901 90 80

73

Mixture containing by weight

—	80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and

—	6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)

0 %

-

31.12.2026

0.2902

ex 3901 90 80

91

Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid

0 %

-

31.12.2023

0.3906

ex 3901 90 80

92

Chlorosulphonated polyethylene

0 %

-

31.12.2023

0.2899

ex 3901 90 80

93

Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets (1)

0 %

-

31.12.2023

0.3186

ex 3901 90 80

94

Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene

0 %

-

31.12.2023

0.2898

ex 3901 90 80

97

Chlorinated polyethylene, in the form of powder

0 %

-

31.12.2023

0.2895

ex 3902 10 00

20

Polypropylene, containing no plasticiser,

—	of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),

—	of a heat of fusion of 15 J/g or more but not more than 70 J/g,

—	of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method),

—	of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)

0 %

-

31.12.2023

0.4591

ex 3902 10 00

40

Polypropylene, containing no plasticiser:

—	of a tensile strength: of 32-77 MPa (as determined by the ASTM D638 method);

—	of a flexural strength of 50-105 MPa (as determined by the ASTM D790 method);

—	of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D 1238 method);

—	with 40 % or more but not more than 80 % by weight of polypropylene,

—	with 10 % or more but not more than 30 % by weight of glass fibre,

—	with 10 % or more but not more than 30 % by weight of mica

0 %

-

31.12.2024

0.3180

ex 3902 20 00

10

Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800

0 %

-

31.12.2023

0.3179

ex 3902 20 00

20

Hydrogenated polyisobutene, in liquid form

0 %

-

31.12.2023

0.8125

ex 3902 30 00

20

Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene

0 %

-

31.12.2025

0.8232

ex 3902 30 00

30

Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene

0 %

-

31.12.2026

0.3181

ex 3902 30 00

91

A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39

0 %

-

31.12.2023

0.5143

ex 3902 30 00

95

A-B-A block copolymer, consisting of:

—	a copolymer of propylene and ethylene and

—	21 % (± 3 %) by weight of polystyrene

0 %

-

31.12.2026

0.5138

ex 3902 30 00

97

Liquid ethylene-propylene-copolymer with:

—	a flashpoint of 250 °C or more,

—	a viscosity index of 150 or more,

—	of a number average molecular weight (Mn) of 650 or more

0 %

-

31.12.2026

0.4424

ex 3902 90 90

52

Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin

0 %

-

31.12.2023

0.4509

ex 3902 90 90

55

Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene

0 %

-

31.12.2023

0.4768

ex 3902 90 90

60

Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:

—	liquid at room temperature

—	obtained by cationic polymerisation of C-5 alkenes monomers

—	with a number average molecular weight (Mn) of 370 (± 50)

—	with a weight average molecular weight (Mw) of 500 (± 100)

0 %

-

31.12.2024

0.7950

ex 3902 90 90

65

Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39

0 %

-

31.12.2025

0.4040

ex 3902 90 90

70

Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without:

—	not more than 40 % by weight of tetradecene and/or

—	not more than 2 % by weight decene and/or

—	not more than 2 % by weight of hexadecene

0 %

-

31.12.2026

0.6422

ex 3902 90 90

ex 3911 90 99

75

28

Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form

0 %

-

31.12.2024

0.2900

ex 3902 90 90

92

Polymers of 4-methylpent-1-ene

0 %

-

31.12.2023

0.6214

ex 3902 90 90

94

Chlorinated polyolefins, whether or not in a solution or dispersion

0 %

-

31.12.2023

0.4166

ex 3903 19 00

40

Crystalline polystyrene with:

—	a melting point of 268 °C or more but not more than 272 °C

—	a setting point of 232 °C or more but not more than 247 °C,

—	whether or not containing additives and filling material

0 %

-

31.12.2026

0.5175

ex 3903 90 90

15

Copolymer in the form of granules containing by weight:

—	78 (± 4 %) of styrene,

—	9 (± 2 %) of n-butyl acrylate,

—	11 (± 3 %) of n-butyl methacrylate,,

—	1,5 (± 0,7 %) of methacrylic acid and

—	0,01 % or more but not more than 2,5 % of polyolefinic wax

0 %

-

31.12.2023

0.5176

ex 3903 90 90

20

Copolymer in the form of granules containing by weight:

—	83 ± 3 % styrene,

—	7 ± 2 % n-butyl acrylate,

—	9 ± 2 % n-butyl methacrylate and

—	0,01 % or more but not more than 1 % of polyolefinic wax

0 %

-

31.12.2026

0.7861

ex 3903 90 90

33

Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.2891

ex 3903 90 90

ex 3911 90 99

35

43

Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 oC

0 %

-

31.12.2023

0.7417

ex 3903 90 90

ex 3904 69 80

38

88

Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)

0 %

-

31.12.2022

0.6565

ex 3903 90 90

45

Preparation, in form of powder, containing by weight:

—	86 % or more but not more than 90 % of styrene-acrylic-copolymer and

—	9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)

0 %

m3

31.12.2024

0.5473

ex 3903 90 90

ex 3911 90 99

60

Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4 500, in flake or powder form

0 %

-

31.12.2026

0.6736

ex 3903 90 90

65

Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)

0 %

-

31.12.2025

0.6804

ex 3903 90 90

70

Copolymer in the form of granules containing by weight:

—	75 % (± 7 %) styrene and

—	25 % (± 7 %) methylmethacrylate

0 %

m3

31.12.2025

0.3910

ex 3903 90 90

80

Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:

—	minimum 65 % styrene,

—	maximum 25 % divinylbenzene

for use in the manufacture of ion exchange resins (1)

0 %

-

31.12.2023

0.4410

ex 3903 90 90

86

Mixture containing by weight:

—	45 % or more but not more than 65 % of polymers of styrene

—	35 % or more but not more than 45 % of poly(phenylene ether)

—	not more than 10 % of other additives

and with one or more of the following special colour effects:

—	metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

—	fluorescent, as characterized by emitting light during absorption of ultraviolet radiation

—	bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale

0 %

-

31.12.2023

0.2887

ex 3904 30 00

ex 3904 40 00

30

91

Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

—	87 % or more but not more than 92 % of vinyl chloride,

—	2 % or more but not more than 9 % of vinyl acetate and

—	1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)

0 %

-

31.12.2023

0.2885

ex 3904 61 00

20

Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions

0 %

-

31.12.2023

0.7675

ex 3904 69 80

20

Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)

0 %

-

31.12.2023

0.7626

ex 3904 69 80

30

Copolymer of tetrafluoroethylene, hexafluoropropene and ethene

0 %

-

31.12.2023

0.4981

ex 3904 69 80

81

Poly(vinylidene fluoride) (CAS RN 24937-79-9)

0 %

-

31.12.2025

0.5560

ex 3904 69 80

85

Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder form, whether or not with fillers

0 %

-

31.12.2022

0.3285

ex 3904 69 80

94

Copolymer of ethylene and tetrafluoroethylene

0 %

-

31.12.2023

0.2883

ex 3904 69 80

96

Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39

0 %

-

31.12.2023

0.3745

ex 3904 69 80

97

Copolymer of chlorotrifluoroethylene and vinylidene difluoride

0 %

-

31.12.2024

0.5786

ex 3905 30 00

10

Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors (1)

0 %

-

31.12.2022

0.5774

ex 3905 91 00

40

Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene

0 %

-

31.12.2022

0.8126

ex 3905 91 00

50

Aqueous solution consisting by weight of:

—	10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),

—	not more than 1 % preservatives

0 %

-

31.12.2025

0.8145

ex 3905 91 00

60

Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:

—	27 % or more but not more than 33 % of copolymer,

—	not more than 1,5 % of ethanol (CAS RN 64-17-5),

—	not more than 1 % of preservatives

0 %

-

31.12.2025

0.8138

ex 3905 91 00

70

Aqueous solution, containing by weight:

—	25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),

—	10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)

0 %

-

31.12.2025

0.8139

ex 3905 91 00

80

Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)

0 %

-

31.12.2025

0.3283

ex 3905 99 90

95

Hexadecylated or eicosylated polyvinylpyrrolidone

0 %

-

31.12.2023

0.2880

ex 3905 99 90

96

Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight:

—	9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

—	5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

0 %

-

31.12.2023

0.3282

ex 3905 99 90

97

Povidone (INN)-iodine (CAS RN 25655-41-8)

0 %

-

31.12.2023

0.3278

ex 3905 99 90

98

Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups

0 %

-

31.12.2023

0.3276

3906 90 60

Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide

0 %

-

31.12.2023

0.3279

ex 3906 90 90

10

Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 (1)

0 %

-

31.12.2023

0.7347

ex 3906 90 90

23

Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm

0 %

-

31.12.2022

0.5814

ex 3906 90 90

27

Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate

0 %

-

31.12.2022

0.6672

ex 3906 90 90

33

Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm

0 %

-

31.12.2025

0.6663

ex 3906 90 90

37

Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm

0 %

-

31.12.2025

0.4667

ex 3906 90 90

41

Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30

0 %

-

31.12.2024

0.7125

ex 3906 90 90

43

Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)

0 %

-

31.12.2026

0.2886

ex 3906 90 90

50

Polymers of esters of acrylic acid with one or more of the following monomers in the chain:

—	chloromethyl vinyl ether,

—	chloroethyl vinyl ether,

—	chloromethylstyrene,

—	vinyl chloroacetate,

—	methacrylic acid,

—	butenedioic acid monobutyl ester,

—	butenedioic acid monocyclohexyl ester,

containing by weight not more than 5 % of each monomer unit

0 %

-

31.12.2023

0.7499

ex 3906 90 90

60

Aqueous dispersion containing by weight:

—	more than 10 % but not more than 15 % of ethanol, and

—	more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative

0 %

-

31.12.2023

0.6425

ex 3906 90 90

73

Preparation containing by weight:

—	33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,

—	24 % or more but not more than 28 % of propylene glycol, and

—	37 % or more but not more than 41 % of water

0 %

-

31.12.2024

0.6891

ex 3907 10 00

20

Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine

0 %

-

31.12.2022

0.3272

ex 3907 29 11

10

Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more

0 %

-

31.12.2023

0.4378

ex 3907 29 11

20

Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000

0 %

-

31.12.2023

0.5379

ex 3907 29 11

60

Preparation containing:

—	α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

—	α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

0 %

-

31.12.2022

0.5862

ex 3907 29 20

20

Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2 700 or more but not more than 3 100 (CAS RN 25190-06-1)

0 %

-

31.12.2022

0.7099

ex 3907 29 20

25

Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight:

—	48 % or more but not more than 52 % of propylene oxide and

—	48 % or more but not more than 52 % of butylene oxide

0 %

-

31.12.2023

0.2876

ex 3907 29 20

30

Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone

0 %

-

31.12.2023

0.7532

ex 3907 29 20

35

Mixture containing by weight:

—	5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and

—	85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)

0 %

-

31.12.2023

0.4013

ex 3907 29 20

40

Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3 600

0 %

-

31.12.2023

0.6351

ex 3907 29 20

50

Poly(p-phenylene oxide) in the form of powder

—	with a glasstransitiontemperature of 210 °C,

—	with a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 ,

—	with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

0 %

-

31.12.2024

0.7308

ex 3907 29 20

60

Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium

0 %

-

31.12.2022

0.3271

ex 3907 29 99

15

Poly(oxypropylene) having alkoxysilyl end-groups

0 %

-

31.12.2023

0.7478

ex 3907 29 99

20

2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide

0 %

-

31.12.2023

0.2920

ex 3907 29 99

30

Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)

0 %

-

31.12.2023

0.7484

ex 3907 29 99

40

N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa

0 %

-

31.12.2023

0.3269

ex 3907 29 99

45

Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups

0 %

-

31.12.2023

0.4536

ex 3907 29 99

50

Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient

0 %

-

31.12.2023

0.4546

ex 3907 29 99

55

Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000

0 %

-

31.12.2023

0.5144

ex 3907 29 99

60

Polytetramethylene oxide di-p-aminobenzoate

0 %

-

31.12.2026

0.6839

ex 3907 30 00

15

Epoxide resin, halogen-free,

—	containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,

—	not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and

—	containing solvents,

for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits (1)

0 %

-

31.12.2025

0.6840

ex 3907 30 00

25

Epoxide resin

—	containing by weight 21 % or more of brome,

—	not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and

—	containing solvents

0 %

-

31.12.2025

0.2759

ex 3907 30 00

ex 3926 90 97

40

70

Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533 , 8535 , 8536 , 8541 , 8542 or 8548 (1)

0 %

-

31.12.2023

0.5578

ex 3907 30 00

60

Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)

0 %

-

31.12.2022

0.7427

ex 3907 30 00

70

Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:

—	65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and

—	none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)

0 %

-

31.12.2022

0.2541

ex 3907 40 00

35

α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)

0 %

-

31.12.2023

0.2564

ex 3907 40 00

45

α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)

0 %

-

31.12.2023

0.6352

ex 3907 40 00

70

Polycarbonate of phosgene and bisphenol A:

—	containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,

—	with p-cumylphenol endcaps, and

—	with a weight average molecular weight (Mw) of 29 900 or more but not more than 31 900

0 %

-

31.12.2024

0.6355

ex 3907 40 00

80

Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps

0 %

-

31.12.2024

0.3263

ex 3907 69 00

10

Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol

0 %

-

31.12.2023

0.2980

3907 70 00

Poly(lactic acid)

0 %

-

31.12.2023

0.2918

ex 3907 91 90

10

Diallyl phthalate prepolymer, in powder form

0 %

-

31.12.2024

0.2977

ex 3907 99 80

10

Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder

0 %

-

31.12.2023

0.5639

ex 3907 99 80

25

Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol

0 %

-

31.12.2022

0.4940

ex 3907 99 80

ex 3913 90 00

30

20

Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)

0 %

-

31.12.2025

0.7491

ex 3907 99 80

35

Copolymer in form of a clear, pale yellow liquid, consisting of

—	phthalic acid isomers and/or aliphatic dicarboxylic acids,

—	aliphatic diols, and

—	fatty acid end-caps

with:

—	a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH,

—	a viscosity at 25 °C of 2 000 cPs or more but not more than 8 000 cPs, and

—	an acid value less than 10 mg KOH/g

0 %

-

31.12.2023

0.5057

ex 3907 99 80

80

Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles

0 %

-

31.12.2025

0.2923

ex 3908 90 00

10

Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39

0 %

-

31.12.2023

0.3261

ex 3908 90 00

30

Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine

0 %

-

31.12.2023

0.7428

ex 3909 20 00

10

Polymer mixture, containing by weight:

—	60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1),

—	15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0),

—	5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and

—	1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)

0 %

-

31.12.2022

0.5032

ex 3909 40 00

20

Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1)

0 %

-

31.12.2025

0.7865

ex 3909 40 00

70

Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80°C or more but not exceeding 95°C according to standard ASTM E28-92 (CAS RN 112484-41-0)

0 %

-

31.12.2024

0.4595

ex 3909 50 90

10

UV curable water soluble liquid photopolymer consisting of a mixture by weight of

—	60 % or more of two-functional acrylated polyurethane oligomers and

—	30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

—	10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates

0 %

-

31.12.2024

0.6423

ex 3909 50 90

20

Preparation containing by weight:

—	14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,

—	3 % or more but not more than 5 % of enzymatically modified starch, and

—	77 % or more but not more than 83 % of water

0 %

-

31.12.2024

0.6420

ex 3909 50 90

30

Preparation containing by weight:

—	16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,

—	19 % or more but not more than 23 % of diethylene glycol butyl ether, and

—	60 % or more but not more than 64 % of water

0 %

-

31.12.2024

0.6424

ex 3909 50 90

40

Preparation containing by weight:

—	34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,

—	37 % or more but not more than 39 % of propylene glycol, and

—	26 % or more but not more than 28 % of water

0 %

-

31.12.2024

0.6921

ex 3910 00 00

15

Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated

0 %

-

31.12.2026

0.3260

ex 3910 00 00

20

Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]

0 %

-

31.12.2023

0.7057

ex 3910 00 00

25

Preparations containing by weight:

—	10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and

—	10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)

0 %

-

31.12.2026

0.7058

ex 3910 00 00

35

Preparations containing by weight:

—	30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and

—	10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)

0 %

-

31.12.2026

0.4049

ex 3910 00 00

40

Silicones of a kind used in the manufacture of long term surgical implants

0 %

-

31.12.2026

0.7217

ex 3910 00 00

45

Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 MPa·s (CAS RN 70131-67-8)

0 %

-

31.12.2026

0.4300

ex 3910 00 00

50

Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum

0 %

-

31.12.2022

0.7218

ex 3910 00 00

55

Preparation containing by weight:

—	55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),

—	30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and

—	1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)

0 %

-

31.12.2026

0.4845

ex 3910 00 00

60

Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups

0 %

-

31.12.2024

0.7953

ex 3910 00 00

65

Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)

0 %

-

31.12.2025

0.5926

ex 3910 00 00

70

Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices

0 %

-

31.12.2023

0.8097

ex 3910 00 00

75

Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder

0 %

-

31.12.2025

0.6324

ex 3910 00 00

80

Monomethacryloxypropylterminated poly(dimethylsiloxane)

0 %

-

31.12.2024

0.4413

ex 3911 10 00

81

Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:

—	an iodine value of more than 120 and

—	a Gardner Colour of more than 10 for the pure product or

—	a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D 6166)

0 %

-

31.12.2023

0.8220

ex 3911 90 19

15

Polyetherimide of 4,4'-[(isopropylidene)bis(p-phenylenoxy)]diphthalic dianhydride and 1,3-benzenediamine or 1,4-benzenediamine (CAS RN 61128-46-9 or CAS RN 61128-47-0)

0 %

-

31.12.2026

0.7163

ex 3911 90 19

20

Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing:

—	83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene),

—	a synthetic rubber,

—	whether or not containing by weight 7 % or more of tricyclopentadiene.

and each separate component containing:

—	either an aluminium-alkyl compound,

—	or an organic complex of tungsten

—	or an organic complex of molybdenum

0 %

-

31.12.2023

0.4280

ex 3911 90 19

30

Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide

0 %

-

31.12.2022

0.5145

ex 3911 90 19

40

m-Xylene formaldehyde resin

0 %

-

31.12.2026

0.6519

ex 3911 90 19

70

Preparation, containing:

—	Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),

—	1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),

—	in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight

0 %

-

31.12.2024

0.8218

ex 3911 90 99

23

Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with:

—	N,N-dimethylpropane-1,3-diamine,

—	a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups,

—

ethanol

(CAS RN 497926-97-3)

0 %

-

31.12.2026

0.3257

ex 3911 90 99

25

Copolymer of vinyltoluene and α-methylstyrene

0 %

-

31.12.2023

0.5109

ex 3911 90 99

35

Alternated copolymer of ethylene and maleic anhydride (EMA)

0 %

-

31.12.2025

0.8009

ex 3911 90 99

38

Mixture containing by weight:

—	90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

—	10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)

0 %

-

31.12.2025

0.3221

ex 3911 90 99

40

Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight

0 %

-

31.12.2023

0.3256

ex 3911 90 99

45

Copolymer of maleic acid and methyl vinyl ether

0 %

-

31.12.2023

0.8010

ex 3911 90 99

48

Mixture containing by weight:

—	90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

—	10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)

0 %

-

31.12.2025

0.5729

ex 3911 90 99

53

Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)

0 %

-

31.12.2022

0.5730

ex 3911 90 99

57

Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)

0 %

-

31.12.2022

0.3255

ex 3911 90 99

65

Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether

0 %

-

31.12.2023

0.4091

ex 3911 90 99

86

Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)

0 %

-

31.12.2026

0.4912

ex 3912 11 00

30

Cellulose triacetate (CAS RN 9012-09-3)

0 %

-

31.12.2026

0.4953

ex 3912 11 00

40

Cellulose diacetate powder

0 %

-

31.12.2025

0.3251

ex 3912 39 85

10

Ethylcellulose, not plasticized

0 %

-

31.12.2023

0.3253

ex 3912 39 85

20

Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose

0 %

-

31.12.2023

0.3252

ex 3912 39 85

30

Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms

0 %

-

31.12.2023

0.5172

ex 3912 39 85

40

Hypromellose (INN) (CAS RN 9004-65-3)

0 %

-

31.12.2026

0.6718

ex 3912 39 85

50

Polyquaternium 10 (CAS RN 68610-92-4)

0 %

-

31.12.2025

0.4017

ex 3912 90 10

20

Hydroxypropyl methylcellulose phthalate

0 %

-

31.12.2023

0.3898

ex 3913 90 00

30

Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000

0 %

-

31.12.2023

0.3749

ex 3913 90 00

85

Sterile sodium hyaluronate (CAS RN 9067-32-7)

0 %

-

31.12.2023

0.3249

ex 3913 90 00

95

Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)

0 %

-

31.12.2023

0.4797

ex 3916 20 00

91

Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:

—	titanium dioxide,

—	poly(methyl methacrylate),

—	calcium carbonate,

—	binding agents

0 %

-

31.12.2024

0.5988

ex 3916 90 10

10

Rods with cellular structure, containing by weight:

—	polyamide-6 or poly(epoxy anhydride)

—	7 % or more but not more than 9 % of polytetrafluorethylene if present

—	10 % or more but not more than 25 % of inorganic fillers

0 %

-

31.12.2023

0.8116

ex 3917 31 00

ex 3917 32 00

ex 3917 39 00

30

20

Tubings:

—	with an outer diameter of 0,33 mm or more but not more than 3,3 mm,

—	with an inner diameter of 0,01 mm or more but not more than 2,1 mm,

—	suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,

—	suitable for all solutions used in chromatography,

—	whether or not with fused silica,

—	whether or not covered with PEEK,

for use in chromatographic system (1)

0 %

-

31.12.2026

0.8117

ex 3917 40 00

20

Plastic fittings (kit of nuts and ferrules or nuts) and connectors:

—

threaded,

—	supported with or without a stainless steel ring,

—	suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

—	outer diameter of 0,33 mm or more but not more than 3,3 mm,

—	suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

—	suitable for all solutions used in chromatography,

for use in the production of chromatographic systems (1)

0 %

-

31.12.2026

0.4641

ex 3917 40 00

91

Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses

0 %

-

31.12.2024

0.2421

ex 3919 10 19

ex 3919 10 80

ex 3919 90 80

10

25

31

Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

0 %

-

31.12.2023

0.4800

ex 3919 10 80

ex 3919 90 80

27

20

Polyester film:

—	coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and

—	on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

0 %

-

31.12.2024

0.2910

ex 3919 10 80

35

Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

0 %

-

31.12.2023

0.4757

ex 3919 10 80

37

Polytetrafluoroethylene film:

—	with a thickness of 100 μm or more,

—	an elongation at break of not more than 100 %,

—	coated on one side with a pressure sensitive silicon adhesive

0 %

-

31.12.2025

0.4093

ex 3919 10 80

ex 3919 90 80

40

43

Black poly(vinyl chloride) film:

—	with a gloss of more than 30 degrees according to ASTM D 2457,

—	whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

0 %

-

31.12.2022

0.4761

ex 3919 10 80

ex 3919 90 80

43

26

Ethylene vinyl acetate film:

—	of a thickness of 100 μm or more,

—	coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner

0 %

-

31.12.2022

0.4303

ex 3919 10 80

ex 3919 90 80

45

Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm

0 %

-

31.12.2022

0.8109

ex 3919 10 80

48

Plastic strips of polypropylene,

—	self-adhesive,

—	unilaterally adhesive-coated with an Acrylic Polymer,

—	in rolls with a width of 20 cm or less,

—	with a thickness including adhesion layer of 0,03 mm or less,

for use in the manufacturing of lithium-ion electric rechargeable batteries (1)

3,2 %

-

31.12.2022

0.3035

ex 3919 10 80

ex 3919 90 80

ex 3920 10 89

50

41

25

Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs (1)

0 %

-

31.12.2023

0.3036

ex 3919 10 80

ex 3919 90 80

55

53

Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method)

0 %

-

31.12.2022

0.2416

ex 3919 10 80

ex 3919 90 80

ex 3920 61 00

57

30

Reflecting sheet:

—	of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern

—	covered on one or both sides with one or more layers of plastic or metallisation, and

—	whether or not covered on one side with a self-adhesive layer and a release sheet

0 %

-

31.12.2023

0.6886

ex 3919 10 80

63

Reflecting film consisting of

—	a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,

—	a layer of an acrylic resin having embedded glass beads,

—	a layer of an acrylic resin hardened by a melamine cross-linking agent,

—	a metal layer,

—	an acrylic adhesive, and

—	a release film

0 %

-

31.12.2025

0.4545

ex 3919 10 80

ex 3919 90 80

73

50

Self-adhesive reflecting sheet whether or not in segmented pieces,

—	whether or not containing a watermark,

—	with or without an application tape coated on one side with an adhesive;

the reflective sheet consists of:

—	a layer of acrylic or vinyl polymer,

—	a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,

—	a layer of metallisation,

—	an adhesive layer, and

—	a release sheet

—	whether or not containing an additional layer of polyester

0 %

-

31.12.2023

0.5166

ex 3919 10 80

ex 3919 90 80

75

80

Self-adhesive reflecting film, consisting of several layers including:

—	a copolymer of acrylic resin,

—	polyurethane,

—	a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,

—	glass microspheres, and

—	an adhesive layer, with a release liner on one or both sides

0 %

-

31.12.2026

0.4799

ex 3919 10 80

ex 3919 90 80

85

28

Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film:

—	coated on one side with an acrylic UV-sensitive adhesive and a liner

—	of a total thickness of 65 μm or more without release liner

0 %

-

31.12.2024

0.4414

ex 3919 90 80

19

Transparent poly(ethylene terephthalate) self-adhesive film:

—	free from impurities or faults,

—	coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,

—	whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,

—	with a total thickness without the liner of 54 μm or more but not more than 64 μm, and

—	a width of more than 1 295 mm but not more than 1 305 mm

0 %

-

31.12.2023

0.7415

ex 3919 90 80

21

Polytetrafluoroethylene film,

—	with a thickness of 50 μm or more but not more than 155 μm,

—	with a width of 6,30 mm or more but not more than 585 mm,

—	an elongation at break of not more than 200 %, and

—	coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 μm

0 %

-

31.12.2022

0.4314

ex 3919 90 80

22

Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm

0 %

-

31.12.2024

0.3243

ex 3919 90 80

23

Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

0 %

-

31.12.2023

0.4760

ex 3919 90 80

24

Reflecting laminated sheet:

—	consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,

—	covered on both sides with one or more layers of plastic material and

—	covered on one side with an adhesive layer and a release sheet

0 %

-

31.12.2024

0.4415

ex 3919 90 80

33

Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm

0 %

-

31.12.2023

0.4398

ex 3919 90 80

35

Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:

—	a layer of polyurethane containing glass micro beads,

—	a layer of poly(ethylene vinyl acetate),

—	an adhesive layer, and

—	a release sheet

0 %

-

31.12.2023

0.7503

ex 3919 90 80

37

Polyethylene or polycarbonate film, cut into ready to use forms,

—	one side partly printed whereby part of the printing either gives information about the meaning of LED’s visible at the unprinted areas, or marks those points which must be touched to operate the system,

—	the other side partly covered with an adhesive layer,

—	both sides covered with a release liner, and

—	with dimensions of not more than 14 cm x 2,5 cm,

for use in the manufacture of push-button switches for mechatronic system adjustable furniture (1)

0 %

-

31.12.2023

0.4445

ex 3919 90 80

49

Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet

0 %

-

31.12.2023

0.5507

ex 3919 90 80

51

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet

0 %

-

31.12.2023

0.4532

ex 3919 90 80

54

Poly(vinyl chloride) film, on one side covered with

—	a polymer layer

—	an adhesive layer

—	a release liner, on one side embossed, containing oblate spheres;

whether or not on the other side covered with an adhesive layer and a metallised polymer layer

0 %

-

31.12.2024

0.4947

ex 3919 90 80

65

Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

0 %

-

31.12.2025

0.4925

ex 3919 90 80

70

Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad

0 %

-

31.12.2025

0.4964

ex 3919 90 80

82

Reflecting film consisting of:

—	a polyurethane layer,

—	a glass microspheres layer,

—	a metallised aluminium layer, and

—	an adhesive, covered on one or both sides with a release liner,

—	whether or not a poly(vinyl chloride) layer,

—	a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use

0 %

-

31.12.2025

0.4459

ex 3919 90 80

83

Reflector or diffuser sheets, in rolls,

—	for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or

—	for equal transmission and distribution of light, intended for LCD modules

0 %

-

31.12.2022

0.3241

ex 3920 10 25

30

Mono-layered High-Density Polyethylene film:

—	containing by weight 99 % or more of polyethylene,

—	with a thickness of 12 μm or more but not more than 20 μm,

—	with a length of 4 000 m or more but not more than 7 000 m,

—	with a width of 600 mm or more but not more than 900 mm

0 %

-

31.12.2023

0.4419

ex 3920 10 28

91

Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:

—	is repetitive and equally spaced along the length of the film

—	is equally and visibly aligned when viewed from the back or front of the film

0 %

-

31.12.2023

0.6640

ex 3920 10 40

40

Tubular layered film predominately of polyethylene:

—	consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,

—	having a total thickness of 55 μm or more,

—	having a diameter of 500 mm or more but not more than 600 mm

0 %

-

31.12.2025

0.3754

ex 3920 10 89

40

Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm

0 %

-

31.12.2022

0.8149

ex 3920 10 89

45

Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels (1)

0 %

-

31.12.2022

0.5139

ex 3920 10 89

55

Ethylene vinyl acetate (EVA) film:

—	with a raised relief surface with embossed undulations,

—	not laminated,

—	not cross-linked, and

—	with a thickness of more than 0,3 mm

0 %

-

31.12.2026

0.5482

ex 3920 20 21

40

Sheets of biaxially - oriented polypropylene film:

—	with the thickness of not more than 0,1 mm,

—	printed on both sides with specialised coatings to allow banknote security printing

0 %

-

31.12.2023

0.8205

ex 3920 20 21

50

Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron

0 %

-

31.12.2026

0.4394

ex 3920 20 29

60

Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:

—	a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and

—	a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa

as determined by test method ASTM D882/ISO 527-3

0 %

-

31.12.2023

0.3028

ex 3920 20 29

70

Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:

—	a thickness of 55 μm or more but not more than 97 μm,

—	a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and

—	a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa

0 %

-

31.12.2024

0.5167

ex 3920 20 29

94

Mono-axial oriented, co-extruded film:

—	consisting of 3 to 5 layers,

—	each layer mainly consisting of polypropylene and/or polyethylene,

—	each layer containing not more than 10 % by weight of other polymers,

—	whether or not containing titanium dioxide in the core layer,

—	of an overall thickness of not more than 75 μm

0 %

-

31.12.2022

0.3024

ex 3920 43 10

92

Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)

0 %

-

31.12.2023

0.3235

ex 3920 43 10

ex 3920 49 10

94

93

Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not more than 1 450 mm, for use in the manufacture of goods of heading 9403 (1)

0 %

-

31.12.2023

0.3026

ex 3920 43 10

95

Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet

0 %

-

31.12.2023

0.5930

ex 3920 49 10

30

Film of a (polyvinyl)chloride-copolymer

—	containing by weight 45 % or more of fillers

—	on a support

0 %

-

31.12.2023

0.3021

ex 3920 51 00

20

Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm

0 %

-

31.12.2023

0.5506

ex 3920 51 00

30

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm

0 %

-

31.12.2023

0.5753

ex 3920 51 00

40

Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)

0 %

-

31.12.2023

0.7949

ex 3920 61 00

40

Extruded thermoplastic foils or films of polycarbonate with:

—	matt surface texture on both sides

—	a thickness of more than 50 μm but not more than 200 μm,

—	a width of 800 mm or more, but not more than 1 500 mm, and

—	a length of 300 m or more, but not more 2 500 m

0 %

-

31.12.2025

0.7418

ex 3920 62 19

ex 3920 62 90

05

10

Poly(ethylene terephthalate) film in rolls:

—	with a thickness of 0,335 mm or more but not more than 0,365 mm, and

—	coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm

0 %

-

31.12.2022

0.3234

ex 3920 62 19

08

Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:

—	only dyed in the mass, or

—	dyed in the mass and metallised on one side

0 %

-

31.12.2023

0.3017

ex 3920 62 19

12

Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

0 %

-

31.12.2023

0.3022

ex 3920 62 19

18

Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

0 %

-

31.12.2023

0.3034

ex 3920 62 19

20

Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1)

0 %

-

31.12.2023

0.3356

ex 3920 62 19

38

Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm

0 %

-

31.12.2023

0.3357

ex 3920 62 19

48

Sheets or rolls of poly(ethylene terephthalate):

—	coated on both sides with a layer of epoxy acrylic resin,

—	of a total thickness of 37 μm (± 3 μm)

0 %

-

31.12.2025

0.2589

ex 3920 62 19

52

Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 Ohms (per square) (as determined by the ASTM D257 method)

0 %

-

31.12.2023

0.4344

ex 3920 62 19

60

Poly(ethylene terephthalate) film:

—	of a thickness of not more than 20 μm,

—	coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm

0 %

-

31.12.2022

0.8011

ex 3920 62 19

ex 3920 62 90

68

20

Poly(ethylene terephthalate) film in rolls:

—	with a thickness of 50 μm or more but not more than 350 μm, and

—	covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm

0 %

-

31.12.2025

0.4520

ex 3920 62 19

76

Transparent poly(ethylene terephthalate) film:

—	coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

—	with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

—	with a light transmission of more than 93 %,

—	with a haze value of not more than 1,3 %,

—	with a total thickness of 10 μm or more but not more than 350 μm,

—	with a width of 800 mm or more but not more than 1 600 mm

0 %

-

31.12.2023

0.3328

ex 3920 69 00

20

Film of poly(ethylene naphthalene-2,6-dicarboxylate)

0 %

-

31.12.2023

0.7882

ex 3920 69 00

30

Mono- or multilayer, transverse oriented, shrink film:

—	composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,

—	with a thickness of 20 μm or more but not more than 100 μm,

—	with a length of 2 385 m or more but not more than 9 075 m,

—	biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.6483

ex 3920 69 00

50

Monolayer, biaxially oriented film:

—	composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,

—	having a thickness of 20 μm or more but not more than 120 μm

—	biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.6484

ex 3920 69 00

60

Monolayer, transverse oriented, shrink film:

—	composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),

—	having a thickness of 45 μm or more but not more than 50 μm,

—	biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.7883

ex 3920 69 00

70

Mono- or multilayer, biaxially oriented film:

—	composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,

—	with a thickness of 9 μm or more but not more than 120 μm,

—	with a length of 1 395 m or more but not more than 21 560 m,

—	biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.6515

ex 3920 79 10

10

Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm

0 %

p/st

31.12.2024

0.4766

ex 3920 91 00

52

Poly(vinyl butyral) film:

—	containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,

—	with a thickness of 0,73 mm or more but not more than 1,50 mm

0 %

-

31.12.2024

0.3329

ex 3920 91 00

91

Poly(vinyl butyral) film having a graduated coloured band

3 %

-

31.12.2023

0.3136

ex 3920 91 00

93

Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

—	a visible light transmission of 50 % or more,

—	coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

—	a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

0 %

-

31.12.2024

0.4508

ex 3920 91 00

95

Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser

0 %

-

31.12.2023

0.3917

ex 3920 99 28

40

Polymer film containing the following monomers:

—	poly (tetramethylene ether glycol),

—	bis (4-isocyanotocyclohexyl) methane,

—	1,4-butanediol or 1,3-butanediol,

—	with a thickness of 0,25 mm or more but not more than 5,0 mm,

—	embossed with a regular pattern on one surface,

—	and covered with a release sheet

0 %

-

31.12.2023

0.5938

ex 3920 99 28

45

Transparent polyurethane film metallised on one side:

—	with a gloss of more than 90 degrees according to ASTM D 2457

—	covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

—	covered on the other side with a protective poly(ethylene terephthalate) film

—	with a total thickness of more than 204 μm but not more than 244 μm

0 %

-

31.12.2024

0.8005

ex 3920 99 28

48

Thermoplastic polyurethane foil in rolls, with:

—	a width of 900 mm or more but not more than 1 016 mm,

—	a matt finish,

—	a thickness of 0,4 mm (± 8 %),

—	an elongation at break of 480 % or more (ASTM D412 (Die C)),

—	a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),

—	a Shore A hardness of 90 (± 3) (ASTM D 2240),

—	a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),

—	a melting point of 165°C (± 10 °C)

0 %

-

31.12.2025

0.4192

ex 3920 99 28

50

Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film

0 %

-

31.12.2026

0.6579

ex 3920 99 28

65

Matt, thermoplastic polyurethane foil in rolls with:

—	a width of 1 640 mm (± 10 mm),

—	a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D 2457),

—	a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),

—	a thickness of more than 365 μm but not more than 760 μm,

—	a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D 2240)),

—	an elongation to break of 470 % (as determined by the method: EN ISO 527)

0 %

m2

31.12.2024

0.5315

ex 3920 99 28

70

Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:

—	microspheres with a coating of metal, whether or not alloyed with gold,

—	an adhesive layer,

—	with a protective layer of silicone or poly(ethylene terephthalate) on one side,

—	with a protective layer of poly(ethylene terephthalate) on the other side, and

—	with a width of 5 cm or more but not more than 100 cm

—	with a length of not more than 2 000 m

0 %

-

31.12.2026

0.3326

ex 3920 99 59

25

Poly(1-chlorotrifluoroethylene) film

0 %

-

31.12.2023

0.7603

ex 3920 99 59

30

Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite

0 %

-

31.12.2023

0.2873

ex 3920 99 59

55

Ion-exchange membranes of fluorinated plastic material

0 %

-

31.12.2023

0.3135

ex 3920 99 59

65

Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %

0 %

-

31.12.2023

0.7529

ex 3920 99 59

75

Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with:

—	a thickness of 0,010 mm or more but not more than 0,80 mm,

—	a width of 1 219 mm or more but not more than 1 575 mm, and

—	a melting point of 252 °C (measured according ASTM D-3418)

0 %

-

31.12.2023

0.4095

ex 3920 99 90

20

Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays

0 %

-

31.12.2023

0.3318

ex 3921 13 10

10

Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

0 %

m3

31.12.2024

0.5815

ex 3921 13 10

20

Rolls of open-cell polyurethane foam:

—	with a thickness of 2,29 mm (± 0,25 mm),

—	surface-treated with a foraminous adhesion promoter, and

—	laminated to a polyester film and a layer of textile material

0 %

-

31.12.2022

0.6066

ex 3921 19 00

30

Blocks with cellular structure, containing by weight:

—	polyamide-6 or poly(epoxy anhydride)

—	7 % or more but not more than 9 % of polytetrafluorethylene if present

—	10 % or more but not more than 25 % of inorganic fillers

0 %

-

31.12.2023

0.6911

ex 3921 19 00

40

Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:

—	a width of 98 mm or more but not more than170 mm,

—	a thickness of 15 μm or more but not more than 36 μm,

of a kind used for the manufacture of alkaline battery separators

3,2 %

-

31.12.2022

0.7263

ex 3921 19 00

45

Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:

—	zero transversal production direction (TD) shrinkage,

—	a total thickness of 8 μm or more, but not more than 50 μm,

—	a width of 15 mm or more, but not more than 900 mm,

—	a length of more than 200 m, but not more than 8 000 m,

—	an average pore size between 0,02 μm and 0,1 μm,

—	laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,

3,2 %

-

31.12.2022

—	coated or not with surfactant,

—	coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,

—	coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

0.7132

ex 3921 19 00

50

Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with

—	a total thickness of more than 0,05 mm but not more than 0,20 mm,

—	a water entry pressure between 5 and 200 kPa according to ISO 811, and

—	an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5

0 %

-

31.12.2026

0.7280

ex 3921 19 00

60

Multi-porous multilayer separator foil with:

—	one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,

—	a width of 65 mm or more but not more than 170 mm,

—	a total thickness of 0,01 mm or more but not more than 0,03 mm,

—	a porosity of 0,25 or more but not more than 0,65

0 %

m2

31.12.2022

0.7309

ex 3921 19 00

70

Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having:

—	a width of 1 600 mm or more but not more than 1 730 mm, and

—	a membrane thickness of 15 μm or more, but not more than 50 μm

for use in the manufacture of a bi-component ePTFE membrane (1)

0 %

-

31.12.2022

0.3314

ex 3921 19 00

93

Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1)

0 %

-

31.12.2023

0.3002

ex 3921 19 00

95

Film of polyethersulfone, of a thickness of not more than 200 μm

0 %

-

31.12.2023

0.3003

ex 3921 90 10

10

Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres

0 %

-

31.12.2023

0.4379

ex 3921 90 10

20

Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin

0 %

-

31.12.2023

0.6156

ex 3921 90 10

30

Multilayer film consisting of:

—	a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,

—	a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,

—	an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,

—	and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm

0 %

m2

31.12.2023

0.4844

ex 3921 90 55

ex 7019 61 00

ex 7019 65 00

ex 7019 66 00

ex 7019 90 00

25

21

29

21

29

21

29

21

29

Prepreg sheets or rolls containing polyimide resin

0 %

-

31.12.2024

0.7510

ex 3921 90 55

35

Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards (1)

0 %

m2

31.12.2023

0.6742

ex 3921 90 55

40

Three layered fabric sheet, in rolls,

—	comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,

—	coated on both sides with polyamide,

—	of a total thickness not more than 135 μm,

—	of a total weight not more than 80 g/m2

0 %

m2

31.12.2025

0.3312

ex 3921 90 60

35

Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells (1)

0 %

-

31.12.2023

0.5396

ex 3923 10 90

10

Photomask or wafer compacts:

—	consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

—	having non porous, abrasion resistant or impact resistant surface properties,

—	fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

—	with or without a gasket seal,

of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

0 %

-

31.12.2026

0.7630

ex 3926 30 00

40

Plastic internal door handle used in the manufacture of motor vehicles (1)

0 %

-

31.12.2023

0.7335

ex 3926 30 00

ex 3926 90 97

50

48

Coated interior or exterior decorative parts consisting of:

—	a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and

—	a PVC foil,

—	not containing layers of copper, nickel or chromium,

for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 (1)

0 %

p/st

31.12.2022

0.2764

ex 3926 90 97

10

Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm

0 %

-

31.12.2023

0.3756

ex 3926 90 97

15

Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1)

0 %

-

31.12.2023

0.2978

ex 3926 90 97

20

Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material

0 %

-

31.12.2023

0.6717

ex 3926 90 97

23

Plastic cover with clips for the exterior rear-view mirror of motor vehicles

0 %

p/st

31.12.2025

0.7445

ex 3926 90 97

27

Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror

0 %

-

31.12.2023

0.5474

ex 3926 90 97

30

Parts of car radio and car air-conditioner front panels

—	of acrylonitrile-butadiene-styrene with or without polycarbonate,

—	coated with a copper, a nickel and a chrome layers,

—	with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm

0 %

-

31.12.2026

0.6301

ex 3926 90 97

33

Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls

0 %

p/st

31.12.2024

0.7061

ex 3926 90 97

40

Silicone shell for breast implant

0 %

-

31.12.2026

0.3850

ex 3926 90 97

43

Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm

0 %

-

31.12.2023

0.6166

ex 3926 90 97

50

Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces

0 %

p/st

31.12.2023

0.8118

ex 3926 90 97

58

Plastic ferrules and/or plugs:

—	supported with or without a stainless steel ring,

—	suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

—	outer diameter of 0,33 mm or more but not more than 3,3 mm,

—	suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

—	suitable for all solutions used in chromatography,

for use in the production of chromatographic systems (1)

0 %

-

31.12.2026

0.7196

ex 3926 90 97

77

Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 16,0 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems

0 %

p/st

31.12.2026

0.3046

ex 4007 00 00

10

Siliconated vulcanised rubber thread and cord

0 %

-

31.12.2023

0.6708

ex 4009 42 00

20

Rubber brake hose with:

—	textile strings,

—	a wall thickness of 3,2 mm,

—	a metal hollow terminal pressed on both ends, and

—	one or more mounting brackets,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2025

0.7042

ex 4010 31 00

ex 4010 33 00

ex 4010 39 00

10

Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2023

0.6844

ex 4016 93 00

30

Rectangular ethylene-propylene-diene rubber gasket, with:

—	a length of 72 mm or more but not more than 825 mm,

—	a width of 18 mm or more but not more than 155 mm,

—	a peak temperature of 150°C or more but not more than 240°C,

—	a permissible material outflow at the place of the mold split of not more than 0,3 mm

0 %

-

31.12.2025

0.7170

ex 4016 99 57

10

Air intake hose for air supply to the combustion part of the engine comprising at least:

—	one flexible rubber hose,

—	one plastic hose, and

—	metal clips,

—	whether or not a resonator

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2026

0.7357

ex 4016 99 57

30

Pin boot of a brake calliper made of vulcanized rubber with:

—	an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,

—	a height of 15 mm or more, but not more than 40 mm, and

—	a ribbed design

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2022

0.5148

ex 4016 99 97

30

Tyre moulding bladder

0 %

-

31.12.2026

0.5842

ex 4104 41 19

10

Buffalo leather, split, chrome tanned synthetic retanned (‘crust’), dry

0 %

-

31.12.2022

0.2555

4105 10 00

4105 30 90

Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

0 %

-

31.12.2023

0.2553

4106 21 00

4106 22 90

Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

0 %

-

31.12.2023

0.2554

4106 31 00

4106 32 00

4106 40 90

4106 92 00

Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114

0 %

-

31.12.2023

0.6223

ex 4408 39 30

10

Okoume veneer sheets:

—	of a length of 1 270 mm or more, but not more than 3 200 mm,

—	of a width of 150 mm or more, but not more than 2 000 mm,

—	of a thickness of 0,5 mm or more, but not more than 4 mm,

—	not sanded and

—	not planed

0 %

-

31.12.2023

0.4217

ex 5004 00 10

10

Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk

0 %

-

31.12.2026

0.2551

ex 5005 00 10

ex 5005 00 90

10

Yarn spun entirely from silk waste (noil), not put up for retail sale

0 %

-

31.12.2023

0.2544

5208 11 10

Fabrics for the manufacture of bandages, dressings and medical gauzes

5,2 %

-

31.12.2023

0.7372

ex 5311 00 90

10

Plain-woven fabric of paper yarns glued on a tissue paper layer:

—	with a weight of 190 g/m2 or more but not more than 280 g/m2, and

—	cut into rectangles with a side length of 40 cm or more but not more than 140 cm

0 %

-

31.12.2022

0.7515

ex 5311 00 90

20

Sisal cloth in rolls with;

—	a length of 20 metres or more but not more than 30 metres and

—	a maximum width of 2,5 metres

for use in the production of Stainless Steel Kitchenware (1)

0 %

-

31.12.2023

0.7608

ex 5402 44 00

10

Synthetic elastomeric filament yarn:

—	untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1 000 dtex,

—	composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,

for use in the manufacture of disposable hygiene products of heading 9619 (1)

0 %

-

31.12.2023

0.2975

ex 5402 49 00

30

Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1)

0 %

-

31.12.2023

0.3098

ex 5402 49 00

50

Non-textured filament yarn of poly(vinyl alcohol)

0 %

-

31.12.2023

0.3096

ex 5402 49 00

70

Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1)

0 %

m

31.12.2023

0.8108

ex 5403 31 00

10

Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments

0 %

-

31.12.2025

0.6884

ex 5403 39 00

10

Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry (1)

0 %

-

31.12.2022

0.2481

ex 5404 19 00

50

Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers (1)

0 %

-

31.12.2023

0.8225

ex 5404 19 00

60

Chemically tapered synthetic filaments of polyester with:

—	a diameter of 0,1 mm or more but not more than 0,6 mm,

—	a length of 30 mm or more but not more than 120 mm,

for use in the manufacture of paintbrushes (1)

0 %

-

31.12.2026

0.3311

ex 5404 90 90

20

Strip of polyimide

0 %

-

31.12.2023

0.4258

ex 5407 10 00

10

Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'–oxybis (phenyleneamine)

0 %

-

31.12.2022

0.3090

ex 5503 11 00

ex 5601 30 00

10

40

Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7 mm

0 %

-

31.12.2023

0.3214

ex 5503 90 00

ex 5506 90 00

ex 5601 30 00

20

10

Poly(vinyl alcohol) fibres, whether or not acetalized

0 %

-

31.12.2023

0.3212

ex 5603 11 10

ex 5603 11 90

ex 5603 12 10

ex 5603 12 90

ex 5603 91 10

ex 5603 91 90

ex 5603 92 10

ex 5603 92 90

10

Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:

—	of a thickness of 200 μm or more but not more than 280 μm and

—	of a weight of 20 g/m2 or more but not more than 50 g/m2

0 %

m2

31.12.2023

0.2552

ex 5603 12 90

ex 5603 13 90

ex 5603 14 90

ex 5603 92 90

ex 5603 93 90

ex 5603 94 90

30

10

60

40

30

Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles

0 %

m2

31.12.2023

0.2548

ex 5603 12 90

ex 5603 13 90

60

Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)

0 %

m2

31.12.2023

0.5059

ex 5603 13 10

20

Non-woven of spunbonded polyethylene, with a coating,

—	of a weight of more than 80 g/m2 but not more than 105 g/m2 and

—	an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

0 %

m2

31.12.2025

0.8024

ex 5603 14 10

20

Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

—	of weight of 160 g/m2 or more but not more than 300 g/m2

—	laminated on one side with a membrane or a membrane and aluminium

—	with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M

—

pleatable

0 %

m2

31.12.2023

0.5987

ex 5603 14 90

60

Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

—	of weight of 160 g/m2 or more but not more than 300 g/m2,

—	not laminated,

—	with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,

—

pleatable

0 %

m2

31.12.2023

0.3041

ex 5603 92 90

ex 5603 93 90

20

Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene

0 %

m2

31.12.2023

0.3042

ex 5603 92 90

ex 5603 94 90

70

40

Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene

0 %

m2

31.12.2023

0.5197

ex 5603 92 90

ex 5603 93 90

80

50

Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:

—	a weight of 25 g/m2 or more but not more than 150 g/m2,

—	in the piece or simply cut into squares or rectangles,

—	not impregnated,

—	with cross-directional or machine-directional stretch properties

for use in the manufacture of infant/child care products (1)

0 %

m2

31.12.2026

0.6135

ex 5603 93 90

60

Nonwovens made of polyester fibres,

—	with a weight of 85 g/m2,

—	with a constant thickness of 95 μm (± 5 μm),

—	neither coated nor covered,

—	in 1 m wide rolls of 2 000 m to 5 000 m length,

suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters (1)

0 %

m2

31.12.2023

0.3210

ex 5603 94 90

20

Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1)

0 %

m2

31.12.2023

0.3406

ex 5607 50 90

10

Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures (1)

0 %

-

31.12.2024

0.2415

ex 5803 00 10

91

Gauze of cotton, of a width of less than 1 500 mm

0 %

-

31.12.2023

0.7081

ex 5903 20 90

20

Two layers' plastic-laminated textile fabric with:

—	one layer consisting of knitted or crocheted polyester textile fabric,

—	other layer consisting of polyurethane foam,

—	a weight of 150 g/m2 or more, but not more than 500 g/m2,

—	a thickness of 1 mm or more, but not more than 5 mm

for use in the manufacture of the retractable roof of motor vehicles (1)

0 %

-

31.12.2026

0.2417

ex 5906 99 90

10

Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)

0 %

-

31.12.2023

0.8213

ex 5906 99 90

30

Woven and coated rubberised textile fabric with the following characteristics:

—	with three layers,

—	the outer layers consist of a natural rubber, EPDM and chloropen rubber compound,

—	the middle layer consists of polyester fabric,

for use in the manufacture of life rafts (1)

0 %

-

31.12.2026

0.2453

ex 5907 00 00

10

Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm

0 %

-

31.12.2026

0.3207

ex 5911 90 99

ex 8421 99 90

30

92

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

0 %

-

31.12.2023

0.4638

ex 5911 90 99

40

Multi-layered non-woven polyester polishing pads, impregnated with polyurethane

0 %

-

31.12.2024

0.7340

ex 5911 90 99

50

Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers

0 %

-

31.12.2022

0.6469

ex 6804 21 00

20

Discs

—	of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,

—	having a self-sharpening effect by constant release of the diamonds,

—	suitable for abrasive cutting of wafers,

—	whether or not containing a hole in the centre,

—	whether or not on a support

—	with a weight of not more than 377 g per piece and

—	with an external diameter of not more than 206 mm

0 %

p/st

31.12.2024

0.2755

ex 6813 89 00

20

Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components (1)

0 %

-

31.12.2023

0.5931

ex 6814 10 00

10

Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres

0 %

-

31.12.2023

0.2546

ex 6903 90 90

40

Silicon carbide reactor tubes and holders having a maximum service temperature of 1 370 °C or more

0 %

-

31.12.2023

0.4978

ex 6909 19 00

20

Silicon nitride (Si3N4) rollers or balls

0 %

-

31.12.2025

0.6071

ex 6909 19 00

25

Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide

0 %

-

31.12.2023

0.3403

ex 6909 19 00

30

Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end

0 %

-

31.12.2023

0.8028

ex 6909 19 00

40

Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:

—	extruded fired ceramic bound multicellular cylindrical structure,

—	5 % or more by weight but not more than 70 % by weight of activated carbon,

—	30 % or more by weight but no more than 90 % by weight of ceramic binder,

—	with a diameter of 29 mm or more but no more than 41 mm,

—	a length of not more than 150 mm,

—	fired at temperature of 800 °C or more

0 %

p/st

31.12.2025

0.2538

ex 6909 19 00

ex 6914 90 00

50

20

Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:

—	2 % or more of diboron trioxide,

—	28 % or less of silicon dioxide and

—	60 % or more of dialuminium trioxide

0 %

-

31.12.2023

0.3766

ex 6909 19 00

60

Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end

0 %

-

31.12.2023

0.4582

ex 6909 19 00

70

Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section

0 %

-

31.12.2023

0.3404

ex 6914 90 00

30

Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm

0 %

-

31.12.2024

0.6286

ex 7006 00 90

25

Glass wafer made of borosilicate float glass

—	with a total thickness variation of 1 μm or less, and

—	laser-engraved

0 %

p/st

31.12.2024

0.7619

ex 7006 00 90

40

Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:

—	a length of 300 mm or more but not more than 1 500 mm,

—	a width of 300 mm or more but not more than 1 500 mm,

—	a thickness of 0,5 mm or more but not more than 1,1 mm,

—	an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,

—	with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,

—	with or without a multi layer anti-reflection-coating on the other side, and

—	machined (chamfered) edges

0 %

-

31.12.2023

0.6380

ex 7009 10 00

30

Layered glass with mechanical dimming ability by different angles of incident light comprising:

—	whether or not a layer of chrome,

—	a break-resistance adhesive tape or hot-melt adhesive, and

—	a release film on the front side and protective paper at the back side,

of a kind used for interior rear-view mirrors of vehicles

0 %

p/st

31.12.2024

0.6870

ex 7009 10 00

40

Electrochromic self-dimming inside rear-view mirror, consisting of:

—	a mirror support

—	a plastic casing and

—	an integrated circuit

for use in the manufacture of motor vehicles of Chapter 87 (1)

0 %

-

31.12.2025

0.5789

ex 7009 10 00

50

Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:

—	whether or not equipped with plastic backing plate,

—	whether or not equipped with a heating element,

—	whether or not equipped with Blind Spot Module (BSM) display

0 %

-

31.12.2022

0.3400

ex 7014 00 00

10

Optical elements of glass (other than those of heading 7015 ), not optically worked, other than signalling glassware

0 %

-

31.12.2023

0.3161

ex 7019 12 00

02

22

Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials

0 %

-

31.12.2023

0.5750

ex 7019 12 00

05

25

Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)

0 %

-

31.12.2022

0.2532

ex 7019 13 00

10

Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers

0 %

-

31.12.2023

0.5749

ex 7019 13 00

15

S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm / + 1,5 μm)

0 %

-

31.12.2022

0.5021

ex 7019 13 00

20

Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

0 %

-

31.12.2025

0.5020

ex 7019 13 00

25

Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

0 %

-

31.12.2025

0.2535

ex 7019 13 00

30

Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate

0 %

-

31.12.2024

0.4848

ex 7019 13 00

50

Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated

0 %

-

31.12.2022

0.2872

ex 7019 13 00

55

Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:

—	9 % or more but not more than 16 % of magnesium oxide,

—	19 % or more but not more than 25 % of aluminium oxide,

—	0 % or more but not more than 2 % of boron oxide,

—	without calcium oxide,

coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene

0 %

-

31.12.2024

0.4476

ex 7019 61 00

ex 7019 65 00

ex 7019 66 00

ex 7019 90 00

11

19

11

19

11

19

11

19

Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120°C (measured according to IPC-TM-650) of:

—	10ppm per°C or more but not more than 12ppm per°C in the length and width, and

—	20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152°C or more but not more than 153°C (measured according IPC-TM-650)

0 %

-

31.12.2023

0.7056

ex 7019 61 00

ex 7019 63 00

70

30

E-fibre glass fabrics:

—	having a weight of 20 g/m2 or more, but not more than 214 g/m2,

—	impregnated with silane,

—

in rolls,

—	having a humidity content by weight of 0,13 % or less, and

—	having not more than 3 hollow fibres out of 100 000 fibres,

for the exclusive use in the manufacture of prepregs and copper clad laminates (1)

0 %

m2

31.12.2026

0.7647

ex 7019 64 00

40

Epoxy resin coated glass woven fabric containing by weight:

—	91 % or more but not more than 93 % of glass fibres,

—	7 % or more but not more than 9 % of epoxy resin

0 %

-

31.12.2023

0.4059

ex 7019 71 00

ex 7019 72 00

50

Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts (1)

0 %

-

31.12.2026

0.3940

ex 7019 90 00

10

Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate

0 %

-

31.12.2023

0.3153

ex 7019 90 00

20

Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)

0 %

-

31.12.2023

0.4024

ex 7019 90 00

30

High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)

0 %

-

31.12.2023

0.5348

ex 7020 00 10

ex 7616 99 90

10

77

Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body

0 %

p/st

31.12.2026

0.7266

ex 7020 00 10

20

Raw material for optical elements of fused silicon dioxide with:

—	a thickness of 10 cm or more but not more than 40 cm and

—	a weight of 100 kg or more

0 %

p/st

31.12.2022

0.4127

ex 7201 10 11

10

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm

0 %

-

31.12.2026

0.4128

ex 7201 10 30

10

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon

0 %

-

31.12.2026

0.3353

7202 50 00

Ferro-silico-chromium

0 %

-

31.12.2023

0.4853

ex 7202 99 80

10

Ferro-dysprosium, containing by weight:

—	78 % or more of dysprosium, and

—	18 % or more but not more than 22 % of iron

0 %

-

31.12.2025

0.7235

ex 7315 11 90

10

Roller type steel timing chain with a fatigue limit of 2 kN at 7 000 rpm or more for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2022

0.7502

ex 7318 24 00

40

Tube or pipe restraint joint elements:

—	of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,

—	produced by metal injection moulding,

—	with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/– 1),

—	measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm

0 %

-

31.12.2023

0.4548

ex 7320 90 10

91

Flat spiral spring of tempered steel, with:

—	a thickness of 2,67 mm or more, but not more than 4,11 mm,

—	a width of 12,57 mm or more, but not more than 16,01 mm,

—	a torque of 18,05 Nm or more, but not more than 73,5 Nm

—	an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°

for use in the manufacture of tensioners for power transmission belts, for internal combustion engines (1)

0 %

p/st

31.12.2023

0.4126

ex 7326 20 00

20

Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling

0 %

-

31.12.2026

0.7414

ex 7326 90 92

40

Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with:

—	a diameter of 5 752 mm or more but not more than 5 758 mm,

—	a height of 3 452 mm or more but not more than 3 454 mm,

—	a total weight 167 875 kg or more but not more than 168 125 kg

of a kind used for the fabrication of a nuclear reactor vessel

0 %

p/st

31.12.2022

0.7891

ex 7326 90 94

40

Steel ball neck, drop forged, machined, also heat treated or surface treated, having an angle between the centre of the conical head and the arm of less than 90° or having an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars (1)

0 %

-

31.12.2024

0.6680

ex 7326 90 98

ex 7907 00 00

40

10

Iron, steel and/or zinc alloy weights:

—	with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,

—	whether or not with parts of other material,

—	whether or not with parts of other metals,

—	whether or not surface treated,

—	whether or not printed,

of a kind used for the production of remote controls

0 %

-

31.12.2025

0.7401

ex 7409 19 00

ex 7410 21 00

10

70

Plates or sheets:

—	with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,

—	coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,

and containing at least one of the following:

—	poly(tetrafluoroethylene) (CAS RN 9002-84-0)

—	poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4)

—	epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height

for use in the manufacture of circuit boards (1)

0 %

-

31.12.2022

0.3352

ex 7410 21 00

10

Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

0 %

-

31.12.2023

0.7509

ex 7410 21 00

20

Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards (1)

0 %

m2

31.12.2023

0.3005

ex 7410 21 00

30

Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil

0 %

-

31.12.2023

0.3926

ex 7410 21 00

40

Sheet or plates:

—	consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

—	consisting of multiple layers of paper, impregnated with phenolic resin,

coated on one or both sides with a copper film with a maximum thickness of 0,15 mm

0 %

-

31.12.2023

0.4479

ex 7410 21 00

50

Plates:

—	consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,

—	covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and

—	with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650

0 %

-

31.12.2023

0.7341

ex 7413 00 00

20

Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed

0 %

-

31.12.2022

0.2447

ex 7419 80 90

ex 7616 99 90

91

60

Disc (target) with deposition material, consisting of molybdenum silicide:

—	containing 1mg/kg or less of sodium and

—	mounted on a copper or aluminium support

0 %

-

31.12.2023

0.7911

ex 7506 20 00

10

Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with

—	a thickness of 0,5 mm or more but not more than 3 mm,

—	a width of 770 mm or more but not more than 1 250 mm

0 %

-

31.12.2024

0.7913

ex 7506 20 00

20

Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:

—	a thickness of 0,5 mm or more but not more than 3 mm,

—	a width of 250 mm or more but not more than 1 219 mm

0 %

-

31.12.2025

0.5890

7601 20 20

Slabs and billets of unwrought aluminium alloys

4 %

-

31.12.2023

0.7752

ex 7604 21 00

10

Hollow profile with:

—	one closed chamber of aluminum alloy 6063-T5 or 6060-T5,

—	a wall thickness of not more than 0,7 mm, and

—	an anodized layer of 10 μm at the surface,

for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases (1)

0 %

-

31.12.2024

0.5029

ex 7604 29 10

ex 7606 12 99

10

21

25

Sheets and bars of aluminium-lithium alloys

0 %

-

31.12.2022

0.6417

ex 7604 29 10

40

Bars and rods of aluminium alloys containing by weight :

—	0,25 % or more but not more than 7 % of zinc, and

—	1 % or more but not more than 3 % of magnesium, and

—	1 % or more but not more than 5 % of copper, and

—	not more than 1 % of manganese

consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process

0 %

-

31.12.2024

0.2410

ex 7605 19 00

10

Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm

0 %

-

31.12.2023

0.6418

ex 7605 29 00

10

Wire of aluminium alloys containing by weight:

—	0,10 % or more but not more than 5 % of copper, and

—	0,2 % or more but not more than 6 % of magnesium, and

—	0,10 % or more but not more than 7 % of zinc, and

—	not more than 1 % of manganese,

consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process

0 %

m

31.12.2024

0.5487

ex 7607 11 90

48

49

51

52

53

56

Aluminium foil in rolls:

—	having a purity of 99,99 % by weight,

—	of a thickness of 0,021 mm or more but not more than 0,2 mm,

—	with a width of 500 mm,

—	with a surface oxide layer by 3 to 4 nm thick,

—	and with a cubic texture of more than 95 %

0 %

-

31.12.2026

0.4050

ex 7607 11 90

65

67

Plain aluminium foil with the following parameters:

—	an aluminium content of 99,98 % or more,

—	a thickness of 0,070 mm or more but not more than 0,125 mm,

—	with a cubic texture,

of a kind used for high voltage etching

3,7 %

-

31.12.2022

0.7698

ex 7607 20 99

10

Aluminium foil, in rolls:

—	coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,

—	with a width of 200 mm or more, but not more than 400 mm,

—	with a thickness of 0,138 mm or more, but not more than 0,168 mm,

for use in the manufacture of lithium-ion battery cell covers (1)

3,7 %

-

31.12.2022

0.7746

ex 7608 20 81

20

Seamless aluminium alloyed extruded tubes (Aluminum 6061F according to standard ASTM B241) with:

—	an outer diameter of 320 mm or more but not more than 400 mm, and

—	a wall thickness of 8 mm or more but not more than 10 mm,

for use in the manufacture of high pressure vessels (1)

0 %

-

31.12.2024

0.6138

ex 7608 20 89

30

Seamless aluminium alloyed extruded tubes with:

—	an outer diameter of 60 mm or more but not more than 420 mm, and

—	a wall thickness of 10 mm or more but not more than 80 mm

0 %

-

31.12.2023

0.7747

ex 7608 20 89

40

Seamless flow forming aluminium alloyed tubes (Aluminum 6061A according to standard ISO 7866) with:

—	an outer diameter of 378 mm or more but not more than 385 mm, and

—	a wall thickness of 4 mm or more but not more than 7 mm

for use in the manufacture of high pressure vessels (1)

0 %

-

31.12.2024

0.8194

ex 7609 00 00

ex 8415 90 00

30

45

Aluminium connecting block for automotive air conditioning systems:

—	with a T6 hardening,

—	equipped with round stubs with a circumferential outer groove,

—	with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,

—	with a distance between holes of 15 mm or more but not more than 22 mm,

—	with sockets designed for brazing or clamping,

—	with mounting holes for M6 or M8 mounting screw, threaded or not,

—	with a width of 5 mm or more but not more than 16 mm,

—	for connecting a compressor, a condenser, an evaporator, a chiller and other lines

0 %

-

31.12.2026

0.2445

ex 7613 00 00

20

Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg

0 %

p/st

31.12.2023

0.3928

ex 7616 99 90

15

Honeycomb aluminium blocks for use in the manufacture of aircraft parts (1)

0 %

p/st

31.12.2023

0.6534

ex 7616 99 90

25

Metallised film:

—	consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,

—	with an optical density of each aluminium layer of not more than 3,0,

—	with each aluminium layer separated by a resin layer,

—	on a carrier film of PET, and

—	on rolls of up to 50 000 metres in length

0 %

-

31.12.2024

0.7997

ex 7616 99 90

35

Aluminum plate with:

—	a length of 36 mm or more but not more than 49 mm,

—	a width of 29,8 mm or more but not more than 45,2 mm,

—	a thickness of 0,18 mm or more but not more than 0,66 mm,

equipped with a polypropylene tape with:

—	a length of 6,5 mm or more but not more than 16,5 mm,

—	a width of 39 mm or more but not more than 56 mm,

—	characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,

—	resistance to influence of electrolyte,

for use in the manufacture of lithium-ion battery cells for motor vehicle batteries (1)

3 %

-

31.12.2022

0.5357

ex 7616 99 90

ex 8482 80 00

ex 8807 30 00

70

10

40

Connecting components for use in the production of helicopter tail rotor shafts (1)

0 %

p/st

31.12.2026

0.6730

ex 8101 96 00

10

Tungsten wire containing by weight 99 % or more of tungsten with:

—	a maximum cross-sectional dimension of not more than 50 μm

—	a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre

0 %

-

31.12.2025

0.7245

ex 8101 96 00

20

Tungsten wire

—	containing by weight 99,95 % or more of tungsten, and

—	with a maximum cross-sectional dimension of not more than 1,02 mm

0 %

-

31.12.2022

0.5694

ex 8102 10 00

10

Molybdenum powder with:

—	a purity by weight of 99 % or more and

—	a particle size of 1,0 μm or more, but not more than 5,0 μm

0 %

-

31.12.2022

0.5097

ex 8104 30 00

35

Magnesium powder:

—	of purity by weight of more than 99,5 %, and

—	with a particle size of not more than 0,8 mm

0 %

-

31.12.2025

0.3417

ex 8104 90 00

10

Ground and polished magnesium sheets, of dimensions not more than 1 500 mm × 2 000 mm, coated on one side with an epoxy resin insensitive to light

0 %

-

31.12.2023

0.5838

ex 8105 90 00

10

Bars or wires made of cobalt alloy containing, by weight:

—	35 % (± 2 %) cobalt,

—	25 % (± 1 %) nickel,

—	19 % (± 1 %) chromium and

—	7 % (± 2 %) iron,

conforming to the material specifications AMS 5842

0 %

-

31.12.2023

0.3416

ex 8108 20 00

10

Titanium sponge

0 %

-

31.12.2023

0.4553

ex 8108 20 00

30

Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm

0 %

-

31.12.2023

0.7310

ex 8108 20 00

70

Titanium alloy slab, with

—	a height of 20,3 cm or more, but not more than 23,3 cm,

—	a length of 246,1 cm or more, but not more than 289,6 cm,

—	a width of 40,6 cm or more, but not more than 46,7 cm,

—	a weight of 820 kg or more but not more than 965 kg,

containing alloy elements by weight of:

—	5,2 % or more but not more than 6,2 % of aluminium,

—	2,5 % or more but not more than 4,8 % of vanadium

0 %

p/st

31.12.2022

0.3211

ex 8108 30 00

10

Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium

0 %

-

31.12.2023

0.4363

ex 8108 90 30

10

Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040

0 %

-

31.12.2024

0.7330

ex 8108 90 30

15

Rods and wire of an alloy of titanium with:

—	a uniform solid cross-section in the form of a cylinder,

—	with a diameter of 0,8 mm or more, but not more than 5 mm,

—	an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,

—	a silicon content by weight of 0,3 % or more, but not more than 0,6 %,

—	a niobium content by weight of 0,1 or more, but not more than 0,3 %, and

—	an iron content by weight of not more than 0,2 %

0 %

-

31.12.2022

0.7942

ex 8108 90 30

35

Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm

0 %

-

31.12.2025

0.4904

ex 8108 90 30

45

Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967

0 %

-

31.12.2025

0.8105

ex 8108 90 30

55

Wires of an alloy of titanium:

—	with a niobium content by weight of 42 % or more but not more than 47 %,

—	with a diameter of not more than 6 mm,

—	complying with standard AMS 4982,

for use in the production of aerospace fasteners (1)

0 %

-

31.12.2025

0.7077

ex 8108 90 30

60

Forged cylindrical bars of titanium with:

—	a purity of 99,995 % by weight or more,

—	a diameter of 140 mm or more but not more than 200 mm,

—	a weight of 5 kg or more but not more than 300 kg

0 %

p/st

31.12.2026

0.5351

ex 8108 90 30

70

Wire of an titanium alloy containing by weight:

—	22 % (± 1 %) of vanadium, and

—	4 % (± 0,5 %) of aluminium

or

—	15 % (± 1 %) of vanadium,

—	3 % (± 0,5 %) of chromium,

—	3 % (± 0,5 % of tin and

—	3 % (± 0,5 %) of aluminium

0 %

-

31.12.2026

0.7285

ex 8108 90 50

45

Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:

—	a thickness of 0,4 mm or more, but not more than 100 mm,

—	a length of not more than 14 m, and

—	a width of not more than 4 m

0 %

-

31.12.2022

0.5352

ex 8108 90 50

55

Plates, sheets, strip and foil of an alloy of titanium

0 %

-

31.12.2026

0.6524

ex 8108 90 50

80

Plates, sheets, strips and foil of non-alloyed titanium

—	of a width of more than 750 mm,

—	of a thickness of not more than 3 mm

0 %

-

31.12.2024

0.6500

ex 8108 90 50

85

Strip or foil of non-alloyed titanium:

—	containing more than 0,07 % by weight of oxygen (O2),

—	of a thickness of 0,4 mm or more but not more than 2,5 mm

—	conforming to the Vickers hardness HV1 standard of not more than 170

of a kind used in the manufacture of welded tubes for nuclear power plant condensers

0 %

-

31.12.2024

0.5353

ex 8108 90 90

ex 9003 90 00

30

20

Parts of spectacle frames and mountings, including

—

temples,

—	blanks of a kind used for the manufacture of spectacle parts and

—	bolts of the kind used for spectacle frames and mountings,

of a titanium alloy

0 %

p/st

31.12.2026

0.2515

ex 8109 21 00

ex 8109 29 00

10

Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry (1)

0 %

-

31.12.2023

0.3415

ex 8110 10 00

10

Antimony in the form of ingots

0 %

-

31.12.2023

0.3413

ex 8112 99 50

10

Alloy of niobium (columbium) and titanium, in the form of bars and rods

0 %

-

31.12.2023

0.5354

ex 8113 00 20

10

Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide

0 %

-

31.12.2023

0.4316

ex 8113 00 90

10

Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits

0 %

-

31.12.2022

0.6805

ex 8113 00 90

20

Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules

0 %

-

31.12.2025

0.6416

ex 8207 19 10

10

Inserts for drilling tools with working parts of agglomerated diamonds

0 %

p/st

31.12.2024

0.5570

ex 8207 30 10

10

Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles (1)

0 %

p/st

31.12.2022

0.7693

ex 8301 20 00

10

Mechanical or electromechanical steering column lock:

—	with a height of 10,5 cm (± 3 cm),

—	with a width of 6,5 cm (± 3 cm),

—	in a metal housing,

—	whether or not with a holder,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2023

0.5024

ex 8301 60 00

ex 8419 90 85

ex 8479 90 70

ex 8481 90 00

ex 8485 90 90

ex 8503 00 99

ex 8515 90 80

ex 8537 10 98

ex 8538 90 99

ex 8708 99 10

ex 8708 99 97

30

40

30

50

30

43

40

55

70

55

22

Silicone or plastic keyboards, comprising:

—	parts of common metal, and

—	whether or not comprising parts of plastic,

—	epoxy resin reinforced with fiberglass or wood,

—	whether or not printed or surface-treated,

—	with or without electrical conductors,

—	with or without a membrane bonded to the keyboard,

—	with or without mono or multilayer protective film

0 %

p/st

31.12.2025

0.7666

ex 8302 30 00

10

Support bracket for an exhaust system:

—	with a thickness of 0,7 mm or more but not more than 1,3 mm,

—	of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,

—	whether or not with mounting holes,

for use in the manufacture of exhaust systems for automobiles (1)

0 %

-

31.12.2023

0.2602

ex 8309 90 90

10

Aluminium can ends:

—	with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm),

—	whether or not with a ‘ring-pull’ aperture

0 %

p/st

31.12.2023

0.3947

ex 8401 30 00

20

Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1)

0 %

-

31.12.2023

0.6319

ex 8401 40 00

10

Stainless steel absorber control rods, filled with neutron absorbing chemical elements

0 %

p/st

31.12.2024

0.8012

ex 8406 82 00

10

Industrial steam turbine with:

—	an output of 5 MW or more but not more than 40 MW,

—	designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° C,

—	equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar

0 %

-

31.12.2025

0.3830

ex 8407 33 20

ex 8407 33 80

ex 8407 90 80

ex 8407 90 90

10

Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of:

—	lawn mowers of subheadings 8433 11 , 8433 19 and 8433 20 ,

—	tractors of subheadings 8701 91 90 , 8701 92 90 whose main function is that of a lawn mower,

—	four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 8433 20 10 or

—	snowploughs and snow blowers of subheading 8430 20 (1)

0 %

-

31.12.2022

0.3828

ex 8407 90 10

10

Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432 , 8433 , 8436 or 8508 (1)

0 %

-

31.12.2026

0.4996

ex 8407 90 90

20

Compact Liquid Petroleum Gas (LPG) Engine System, with:

—	6 cylinders,

—	an output of 75 kW or more, but not more than 80 kW,

—	inlet and exhaust valves modified to operate continuously in heavy duty applications,

for use in the manufacture of vehicles of heading 8427 (1)

0 %

-

31.12.2025

0.2598

ex 8408 90 41

20

Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

0 %

-

31.12.2023

0.2595

ex 8408 90 43

20

Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

0 %

-

31.12.2023

0.5544

ex 8408 90 43

ex 8408 90 45

ex 8408 90 47

40

30

50

4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

—	a capacity of not more than 3 850 cm3, and

—	a rated output of 15 kW or more but not more than 85 kW,

for use in the manufacture of vehicles of heading 8427 (1)

0 %

-

31.12.2022

0.7670

ex 8409 91 00

25

Air intake module for engine cylinders consisting of:

—	a suction pipe,

—	a pressure sensor,

—	an electric throttle,

—

hoses,

—

brackets,

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2023

0.8216

ex 8409 91 00

35

Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:

—	an operating pressure of not more than 22,5 MPa,

—	solenoid direct injector,

—	analog pressure sensor for not more than 22,5 MPa

0 %

-

31.12.2026

0.7027

ex 8409 91 00

40

Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles

(1)

0 %

-

31.12.2026

0.7234

ex 8409 91 00

ex 8409 99 00

45

70

Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of spark or compression ignition engines of motor vehicles (1)

0 %

-

31.12.2026

0.6752

ex 8409 91 00

ex 8409 99 00

50

55

Exhaust manifold with turbine housing of turbochargers with:

—	a heat-resistance of not more than 1 050 °C, and

—	a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm

0 %

p/st

31.12.2023

0.7667

ex 8409 91 00

ex 8409 99 00

53

65

The exhaust gas recirculation assembly consisting of:

—	a control unit,

—	an air throttle,

—	an intake pipe,

—	an outlet hose,

for use in the manufacture of spark-ignition or compression-ignition combustion engines of motor vehicles (1)

0 %

-

31.12.2023

0.7961

ex 8409 91 00

ex 8481 90 00

55

60

Nozzle body for the regulation of angle and distribution of fuel injection:

—	of a cylindrical shape,

—	made of stainless steel,

—	with 4 or more, but not more than 16 holes,

—	with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute

0 %

-

31.12.2025

0.7661

ex 8409 91 00

70

Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:

—	a width of 40 mm or more but not more than 70 mm,

—	valves length of 250 mm or more but not more than 350 mm,

—	air volume of 5,2 litres, and

—	an electrical flow control system that provides maximum performance at more than 3 200 rpm (1)

0 %

-

31.12.2023

0.7965

ex 8409 91 00

75

Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:

—	an inlet diameter of 2 mm or more, but not more than 10 mm,

—	an outlet diameter of 2 mm or more, but not more than 10 mm,

—	an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,

—	a plastic covering moulded around a stainless steel tube

0 %

-

31.12.2025

0.7967

ex 8409 91 00

ex 8481 90 00

80

70

Nozzle needle for opening and closing the flow of fuel in the engine, with:

—

2 holes,

—	4 grooves,

—	a diameter of 3 mm or more, but not more than 6 mm,

—	a length of 25 mm or more, but not more than 35 mm,

—	made of stainless steel with hard-chrome plating

0 %

-

31.12.2025

0.5199

ex 8409 99 00

ex 8479 90 70

10

85

Injectors with solenoid valve for optimised atomisation in the engine combustion chamber

0 %

p/st

31.12.2026

0.7851

ex 8409 99 00

25

Hoses assembly for fuel return from injectors to engine fuel unit consisting of at least:

—	three rubber hoses, whether or not with a protective braided sleeving,

—	three connectors for connecting fuel injectors,

—	five metal clamps,

—	one T-shaped plastic joint,

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2024

0.7236

ex 8409 99 00

60

Intake manifold for air supply to the engine cylinders, comprising at least:

—	a throttle,

—	a boost pressure sensor

for use in the manufacture of compression ignition engines of motor vehicles (1)

0 %

-

31.12.2022

0.7718

ex 8409 99 00

75

High pressure fuel rail of galvanised ferrite-pearlite steel with:

—	at least one pressure sensor and one valve,

—	a length of 314 mm or more but not more than 322 mm,

—	an operating pressure not more than 225 MPa,

—	an inlet temperature not more than 95°C,

—	ambient temperature of -45°C or more but not more than 145°C,

for use in the manufacture of compression ignition engines of motor vehicles (1)

0 %

-

31.12.2024

0.7233

ex 8409 99 00

80

High pressure oil jet nozzle for engine piston cooling and lubrication with:

—	an opening pressure of 1 bar or more, but not more than 3 bar,

—	a closing pressure of more than 0,7 bar,

—	a one-way valve

for use in the manufacture of compression ignition engines of motor vehicles (1)

0 %

-

31.12.2022

0.6751

ex 8411 99 00

20

Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:

—	of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,

—	with a heat-resistance of not more than 1 100 °C,

—	with a diameter of 28 mm or more, but not more than 180 mm,

—	with a height of 20 mm or more, but not more than 150 mm

0 %

p/st

31.12.2022

0.7225

ex 8411 99 00

30

Turbine housing of turbochargers with:

—	a heat-resistance of not more than 1 050 °C, and

—	a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm

0 %

p/st

31.12.2026

0.5975

ex 8412 39 00

20

Actuator for a single-stage turbocharger:

—	whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,

—	with a length of not more than 350 mm,

—	with a diameter of not more than 75 mm,

—	with a height of not more than 110 mm

0 %

p/st

31.12.2023

0.8148

ex 8412 90 80

20

Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:

—	a length of 3,5 m or more but not more than 4,5 m,

—	a width of 2 m or more but not more than 4,2 m,

—	a height of 1 m or more, but not more than 1,3 m,

—	a weight of 11 tons or more but not more than 21,5 tons,

—	mounting bores for yawdrive,

—	mounting flange for gearbox support,

—	drivetrain mount,

—	different screw sockets

0 %

p/st

01.12.2022

0.8079

ex 8412 90 80

30

Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:

—	a diameter of 2 m or more, but not more than 5 m,

—	a weight of 2 tons or more but not more than 7 tons

0 %

p/st

31.12.2025

0.7161

ex 8413 30 20

30

Single-cylinder radial-piston high pressure pump for gasoline direct injection with:

—	an operating pressure of 200 bar or more, but not more than 350 bar,

—	a flow control, and

—	a pressure relief valve,

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2026

0.7969

ex 8413 30 20

40

High-pressure plunger pump for direct diesel injection, with:

—	an operating pressure of not more than 275 MPa,

—	a camshaft,

—	a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute,

—	an electric pressure regulating valve

0 %

-

31.12.2025

0.7970

ex 8413 30 20

50

High-pressure plunger pump for direct diesel injection:

—	with an operating pressure of not more than 275 MPa,

—	designed to contact the crankshaft,

—	with an electromagnetic valve

0 %

-

31.12.2025

0.8215

ex 8413 30 20

60

High-pressure plunger pump for direct petrol injection:

—	with an operating pressure of not more than 90 MPa,

—	designed to contact the crankshaft,

—	with an electromagnetic valve

0 %

-

31.12.2026

0.8185

ex 8413 70 51

20

Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with:

—	a discharge outlet diameter of 20 mm or more,

—	9 slots stator,

—	6 pole rotor,

—	rated power of 95 W,

—	volute with straight outlet,

—	rotor chamber without sand filter

0 %

-

31.12.2026

0.8186

ex 8413 70 51

30

Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with:

—	a discharge outlet diameter of 20 mm or more,

—	9 slots stator,

—	6 pole rotor,

—	rated power of 95 W,

—	volute with clamped rubber hose outlet,

—	rotor chamber without sand filter

0 %

-

31.12.2026

0.8187

ex 8413 70 51

40

Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft, monobloc with the motor, volute with integrated heater, with:

—	a discharge outlet diameter of 20 mm or more,

—	9 slots square or chain pole stator,

—	6 pole rotor,

—	ferritic or rare earth magnets,

—	rated power of 95 W or 80 W,

—	heater of nominal power of 1 800 W and soldered or laser welded safety, devices,

—	volute with or without clamped rubber outlet,

—	rotor chamber with ultrasonic welded sand filter

0 %

-

31.12.2026

0.6346

ex 8413 91 00

30

Fuel pump cover:

—	consisting of aluminium alloys,

—	with a diameter of 38 mm or 50 mm,

—	with two concentric, annular grooves formed on its surface,

—

anodized,

of a kind used in motor vehicles with petrol engines

0 %

p/st

31.12.2024

0.7669

ex 8414 10 25

30

Tandem pump consisting of:

—	an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute,

—	vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2023

0.7691

ex 8414 10 89

30

Electric vacuum pump with:

—	Controller Area Network (CAN bus),

—	whether or not with a rubber hose,

—	a connecting cable with connector,

—	a mounting bracket,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2023

0.8111

ex 8414 30 20

20

Hermetic reciprocating refrigeration compressor, for isobutane:

—	with a 3-phase permanent magnet brushless motor,

—	having left side suction connection and Power Factor Correction (PFC) inverter,

—	with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8112

ex 8414 30 20

30

Hermetic reciprocating refrigeration compressor for isobutane as refrigerant:

—	with a 3-phase permanent magnet brushless motor,

—	having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1 300 rpm up to 4 500 rpm,

—	with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8134

ex 8414 30 20

40

Hermetic reciprocating compressor, for isobutane as refrigerant with:

—	a Resistance Start Capacitor Run (RSCR) single phase motor,

—	a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,

—	a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8135

ex 8414 30 20

50

Hermetic reciprocating compressor, for isobutane as refrigerant with:

—	a Resistance Start Capacitor Run (RSCR) single phase motor,

—	a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,

—	a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions

0 %

-

31.12.2025

0.4727

ex 8414 30 81

50

Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment

0 %

-

31.12.2024

0.6160

ex 8414 30 81

ex 8414 80 73

60

30

Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:

—	driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors,

—	with a nominal power rating of not more than 1,5 kW,

—	a rated voltage of 100 V or more but not more than 240 V,

—	with a height of not more than 300 mm,

—	an external diameter of not more than 150 mm,

—	with a unit weight of not more than 15 kg,

for use in the manufacture of heat pumps for household appliances, including clothes dryers (1)

0 %

-

31.12.2023

0.2593

ex 8414 30 89

20

Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW

0 %

-

31.12.2023

0.7694

ex 8414 30 89

30

Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87 (1)

0 %

-

31.12.2023

0.7595

ex 8414 59 35

20

Radial fan, with:

—	a dimension of 25mm (height) x 85mm (width) x 85mm (depth),

—	a weight of 120 g,

—	a rated voltage of 13,6 VDC (direct current voltage),

—	an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),

—	a rated current of 1,1 A (TYP),

—	a rated power of 15 W,

—	a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4 800 RPM (revolutions per minute) (free flow),

—	an air flow of not more than 17,5 litre/s,

—	an air pressure of not more than16 mm H2O ≈ 157 Pa,

—	an overall sound pressure of not more than 58 dB(A) at 4 800 RPM (revolutions per minute), and

with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems

0 %

-

31.12.2023

0.8207

ex 8414 59 35

30

Electric blower for cooling the high-voltage battery of a hybrid passenger car with:

—	a control unit,

—	MOSFET inverter,

—	a voltage of 9 V or more but not more than 16 V,

—	ambient temperature of – 40 °C or more, but not more than 80 °C,

for use in the manufacture of hybrid passenger cars (1)

0 %

-

31.12.2026

0.7317

ex 8414 80 22

20

Air membrane compressor with:

—	a flow of 4,5 l/min or more, but not more than 7 l/min,

—	power input of not more than 8,1 W, and

—	a gauge pressure capacity not exceeding 400 hPa (0,4 bar),

of a kind used in the production of motor vehicle seats

0 %

-

31.12.2022

0.8133

ex 8414 80 73

40

Hermetic heat pump compressor, for R134A or R450A as refrigerant:

—	with the Single Phase Induction Motor PSC (Permanent Split Capacitor),

—	having bottom side suction connection and top side discharge connection,

—	8,1 cm3 or 8,2 cm3 displacement,

—	running at 3 000 rpm,

—	with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions

0 %

-

31.12.2025

0.2507

ex 8414 90 00

20

Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles (1)

0 %

p/st

31.12.2024

0.3386

ex 8414 90 00

30

Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1)

0 %

p/st

31.12.2023

0.4027

ex 8414 90 00

40

Drive part, for compressors of air conditioning machines of motor vehicles (1)

0 %

p/st

31.12.2023

0.6842

ex 8415 90 00

60

Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:

—	extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,

—	a weight of 0,02 kg or more but not more than 0,25 kg

0 %

p/st

31.12.2025

0.6860

ex 8415 90 00

65

Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:

—	a length of 143 mm or more but not more than 292 mm,

—	a diameter of 31 mm or more but not more than 99 mm,

—	with a weight of not less than 0,12 kg and not more than 0,9 kg,

—	a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and

—	a solid particle diameter of not more than 0,06 mm,

for use in the manufacture of car air-conditioning systems (1)

0 %

p/st

31.12.2022

0.7996

ex 8418 99 90

20

Aluminium connecting block for connecting to a condenser manifold in welding process:

—	hardened to T6 or T5 temper,

—	with a weight of not more than 150 g,

—	with a length of 20 mm or more but not more than 150 mm,

—	with a fixing rail in one piece

0 %

-

31.12.2025

0.8004

ex 8418 99 90

30

Receiver dryer profile for connecting to a condenser manifold in welding process with:

—	a braze flatness of not more than 0,2 mm,

—	a weight of 100 g or more but not more than 600 g,

—	a fixing rail in one piece

0 %

-

31.12.2025

0.6231

ex 8421 21 00

20

Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:

—	ultrafiltration system

—	carbon filtration system

—	water softener system

for use in a biopharmaceutical laboratory

0 %

p/st

31.12.2024

0.3375

ex 8421 99 90

91

Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder

0 %

p/st

31.12.2023

0.5831

ex 8431 20 00

30

Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 (1)

0 %

p/st

31.12.2022

0.6193

ex 8431 20 00

40

Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427 (1)

0 %

p/st

31.12.2023

0.6821

ex 8436 99 00

10

Part containing:

—	a single-phase AC motor,

—	an epicyclic gearing,

—	a cutter blade,

and whether or not containing:

—	a capacitor,

—	a part fitted with a threaded bolt,

for use in the manufacture of garden shredders (1)

0 %

p/st

31.12.2025

0.3374

ex 8439 99 00

10

Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more

0 %

p/st

31.12.2023

0.2599

ex 8477 80 99

10

Machines for casting or for surface modification of plastic membranes of heading 3921

0 %

p/st

31.12.2023

0.8123

ex 8479 89 97

28

Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:

—	electronic brake assistants,

—	hydraulic unit driven by brushless electric motor,

—	brake fluid reservoir,

for use in the manufacture of plug-in hybrid passenger cars (1)

0 %

-

31.12.2025

0.7517

ex 8479 89 97

35

Mechanical unit ensuring the movement of the camshaft with:

—	6 or 8 oil chambers,

—	a phasing range of at least 18° but not more than 62°,

—	a steel and/or steel alloy sprocket,

—	a steel and/or steel alloy and/or aluminium alloy rotor

0 %

-

31.12.2023

0.8206

ex 8479 89 97

ex 8501 31 00

38

68

Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:

—	a length of 110 mm or more but not more than 140 mm,

—	a width of 90 mm or more but not more than 130 mm,

—	a height of 80 mm or more but not more than 110 mm

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2026

0.7979

ex 8479 89 97

55

Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode

0,8 %

-

31.12.2022

0.6230

ex 8479 89 97

60

Bioreactor for biopharmaceutical cell culture

—	having interior surfaces of austenitic stainless steel, and

—	with a process capacity up to 15 000 litres,

—	whether or not combined with a ‘clean-in-process’ system and/or a dedicated paired media hold vessel

0 %

p/st

31.12.2026

0.7982

ex 8479 89 97

65

Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line

0,8 %

-

31.12.2022

0.6573

ex 8479 89 97

70

Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy

0 %

p/st

31.12.2024

0.7964

ex 8479 90 70

40

Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:

—	of a circular shape,

—	made of steel alloy with sintering process,

—	with not more than 8 oil chambers,

—	with a Rockwell hardness of 55 or more,

—	with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3

0 %

-

31.12.2025

0.7962

ex 8479 90 70

50

Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:

—	with 4 blades that end in grooves,

—	made of steel alloy with sintering process

0 %

-

31.12.2025

0.7375

ex 8481 10 99

20

Electromagnetic pressure reducing valve

—	with a plunger,

—	with at least 275 MPa internal tightness,

—	with a plastic connector with 2 silver or tin pins

0 %

-

31.12.2022

0.7424

ex 8481 10 99

40

Pressure reducing valves in a brass case with:

—	a length of not more than 30 mm (± 1 mm),

—	a width of not more than 18 mm (± 1 mm),

of a kind used for incorporation in fuel delivery modules of motor vehicles

0 %

-

31.12.2022

0.7968

ex 8481 30 91

ex 8481 30 99

30

50

Mechanical check (non-return) valve for opening and closing of the flow of fuel:

—	with an operating pressure of not more than 250 MPa,

—	with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,

—	with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,

—	made of steel

0 %

-

31.12.2025

0.4668

ex 8481 30 91

91

Steel check (non-return) valves with:

—	an opening pressure of not more than 800 kPa,

—	an external diameter not more than 37 mm

0 %

p/st

31.12.2024

0.7850

ex 8481 30 99

30

Brake booster check valve assembly containing at least:

—	three vulcanized rubber hoses,

—	one membrane valve,

—	two metal clamps,

—	one metal holder,

—	whether or not connecting metal pipe,

for use in the manufacture of motor vehicles (1)

0 %

-

31.12.2024

0.3363

ex 8481 80 59

10

Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines

0 %

p/st

31.12.2023

0.7155

ex 8481 80 59

20

Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (1)

0 %

p/st

31.12.2026

0.7380

ex 8481 80 59

30

Two-way flow control valve with housing, with:

—	at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,

—	at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate,

—	at least 19, but not more than 300 MPa operating pressure

0 %

-

31.12.2022

0.7377

ex 8481 80 59

40

Flow-control valve:

—	made of steel,

—	with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,

—	with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,

—	with chromium nitride coating,

—	with a surface roughness of Rp 0,4

0 %

-

31.12.2022

0.7381

ex 8481 80 59

50

Electromagnetic valve for quantity control with:

—	a plunger,

—	a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm

0 %

-

31.12.2022

0.7382

ex 8481 80 59

60

Electromagnetic valve for quantity control

—	with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH

0 %

-

31.12.2022

0.7960

ex 8481 80 59

ex 8481 90 00

70

80

Flow-control valve

—	made of steel,

—	with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,

—	with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

0 %

-

31.12.2025

0.5575

ex 8481 80 69

60

Four-way reversing valve for refrigerants, consisting of:

—	a solenoid pilot valve

—	a brass valve body including valve slider and copper connections

with a working pressure up to 4,5 MPa

0 %

p/st

31.12.2022

0.7519

ex 8481 80 73

ex 8481 80 99

20

70

Pressure- and flow-control valve controlled by external electromagnet:

—	made of steel and/or steel alloy(s),

—	without integrated circuit,

—	of not more than 1 000 kPa operating pressure,

—	with a flow quantity of not more than 5 l/min,

—	without an electromagnet

0 %

-

31.12.2023

0.7637

ex 8481 80 79

ex 8481 80 99

30

Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:

—	a withstanding pressure of the valve body of 6,3 MPa,

—	a leakage ratio of less than 1,6 g/a,

—	an impurity ratio of less than 1,2 mg/PCS,

—	an airtight pressure of the valve body of 4,2 MPa,

for use in the manufacture of air conditioners (1)

0 %

-

31.12.2023

0.7518

ex 8481 90 00

40

Valve armature:

—	for the opening and closing of the flow of fuel,

—	consisting of a shaft and a blade,

—	with at least 3 but not more than 8 holes on the blade,

—	made of metal and/or metal alloy(s)

0 %

-

31.12.2023

0.6391

ex 8482 10 10

ex 8482 10 90

ex 8482 50 00

10

Ball and cylindrical bearings:

—	with an outside diameter of 28 mm or more but not more than 140 mm,

—	with an operational thermal stress of more than 150°C at a working pressure of not more than 14 MPa,

for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants (1)

0 %

p/st

31.12.2024

0.7735

ex 8482 10 10

15

Ball bearings with:

—	an internal diameter of 4 mm or more but not more than 9 mm,

—	an external diameter of not more than 26 mm,

—	a width of not more than 8 mm,

for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm (1)

0 %

-

31.12.2024

0.7707

ex 8482 10 10

ex 8482 10 90

25

40

Double row ball bearings / ball bearing cartridges:

—	with an internal diameter of 3 mm or more, but not more than 9 mm,

—	with an external diameter of 17 mm or more, but not more than 36 mm,

—	with a width of 6 mm or more, but not more than 69 mm,

—	manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5,

—	with ceramic balls,

for use in turbo compressors (turbochargers) (1)

0 %

-

31.12.2024

0.8098

ex 8482 50 00

20

Axial roller bearing made of steel:

—	the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,

—	the rollers are made of anti-friction steel according to ASTM 295-94,

—	with an external diameter of 63 mm or more but not more than 66 mm,

—	with an internal diameter of 44 mm or more but not more than 46 mm,

—	with a weight of 23 g or more but not more than 27 g,

—	with 36 rollers or more but not more than 38 rollers

0 %

p/st

31.12.2025

0.8088

ex 8482 99 00

40

Inner and outer rings made of steel, not grinded, with an internal raceway, with diameters of:

—	14,66 mm or more but not more than 76,2 mm for the inner ring, and

—	26 mm or more but not more than 100 mm for the outer ring

0 %

-

31.12.2025

0.5744

ex 8483 30 32

ex 8483 30 38

30

60

Bearing housing of a kind used in turbochargers:

—	of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,

—	with oil chambers,

—	without bearings,

—	with a diameter of 50 mm or more, but not more than 250 mm,

—	with a height of 40 mm or more, but not more than 150 mm,

—	whether or not with water chambers and connectors

0 %

p/st

31.12.2022

0.5202

ex 8483 40 29

50

Gear set of cycloid gear type with:

—	a rated torque of 50 Nm or more but not more than 9 000 Nm,

—	standard ratios of 1:50 or more but not more than 1:475,

—	lost motion of not more than one arc minute,

—	an efficiency of more than 80 %

of a kind used in robot arms

0 %

p/st

31.12.2026

0.5977

ex 8483 40 29

60

Epicyclic gearing, of a kind used in driving hand-held power tools with:

—	a rated torque of 25 Nm or more, but not more than 70 Nm,

—	standard gear ratios of 1:12.7 or more, but not more than 1:64.3

0 %

p/st

31.12.2023

0.2503

ex 8483 40 51

20

Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)

0 %

p/st

31.12.2023

0.7920

ex 8483 40 59

30

Hydrostatic speed changer:

—	with a hydro pump and a differential with wheel axle,

—	whether or not with a fan impeller and/or a pulley,

for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20 (1)

0 %

p/st

31.12.2024

0.7249

ex 8483 40 90

20

Hydrostatic transmission with:

—	measurements (without shafts) of not more than 154 mm x 115 mm x 108 mm,

—	a weight of not more than 3,3 kg,

—	a maximum rotation speed of the input shaft of 2 700 rpm or more, but not more than 3 200 rpm,

—	a torque of the output shaft of not more than 10,4 Nm,

—	a rotation speed of the output shaft of not more than 930 rpm at 2 800 rpm input speed, and

—	an operating temperature range of -5 °C or more, but not more than +40 °C

for use in the manufacture of hand-operated lawn mowers of subheading 8433 11 90 (1)

0 %

p/st

31.12.2022

0.7248

ex 8483 40 90

30

Hydrostatic transmission with

—	a reduction of 20,63:1 or more, but not more than 22,68:1,

—	an input speed of 1 800 rpm or more when loaded and of not more than 3 000 rpm when unloaded,

—	a continuous output torque of 142 Nm or more, but not more than 156 Nm,

—	an intermittent output torque of 264 Nm or more, but not more than 291 Nm, and

—	an axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm,

—	whether or not equipped with a fan impeller or with a pulley with integrated fan impeller

for use in the production of self-propelled lawn mowers with a seat of subheading 8433 11 51 , and tractors of subheading 8701 91 90 , whose main function is that of a lawn mower (1)

0 %

p/st

31.12.2022

0.4997

ex 8483 40 90

80

Transmission gearbox, with:

—	not more than 3 gears,

—	an automatic deceleration system, and

—	a power reversal system,

for use in the manufacture of goods of heading 8427 (1)

0 %

p/st

31.12.2025

0.8100

ex 8483 50 80

20

Pulley blocks of non-cast steel:

—	made of structural carbon steel complying with standard JIS G4051,

—	with an external diameter of 114 mm or more but not more than 118 mm,

—	with an internal diameter of 33 mm or more but not more than 37 mm,

—	with a width of 29 mm or more but not more than 33 mm,

—	with a weight of 0,6 kg or more but not more than 0,9 kg,

—	with 6 trapezoidal grooves

0 %

p/st

31.12.2025

0.8209

ex 8483 90 89

20

Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:

—

case,

—

rotor,

—	at least 4 screws,

—

spring,

—	of an external diameter of 80 mm or more but not exceeding 95 mm,

—	of a thickness of 25 mm or more but not more than 35 mm,

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2026

0.7156

ex 8484 20 00

10

Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (1)

0 %

p/st

31.12.2026

0.7604

ex 8484 20 00

20

Mechanical face sealing device made of two movable rings (one ceramic mating, with a thermal conductivity lower than 80W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side

0 %

-

31.12.2023

0.6854

ex 8501 10 10

20

Synchronous motor for a dishwasher with a water flow control mechanism with

—	a length without axle of 24 mm (± 0,3),

—	a diameter of 49,3 mm (± 0,3),

—	a rated voltage of 220 V AC or more but not more than 240 V AC,

—	a rated frequency of 50 Hz or more but not more than 60 Hz,

—	an input power of not more than 4 W,

—	a rotation speed of 4rpm or more but not more than 4,8rpm,

—	an output torque of not less than 10kgf/cm

0 %

-

31.12.2022

0.7601

ex 8501 10 10

30

Motors for air pumps, with:

—	operating voltage of 9 VDC or more but not more than 24 VDC,

—	operating temperature range of -40°C or more but not more than 80°C,

—	an output not exceeding 18 W,

for use in the manufacture of pneumatic support and ventilation systems for car seats (1)

0 %

-

31.12.2023

0.7857

ex 8501 10 10

40

Synchronous hybrid stepper motor with:

—	an output not exceeding 18 W,

—	two phases,

—	a rated current of not more than 2,5 A/phase,

—	a rated voltage of not more than 20 V,

—	with or without a threaded shaft,

for use in the manufacture of 3D printers (1)

0 %

-

31.12.2024

0.7197

ex 8501 10 99

56

DC Motor :

—	with a speed rotation of not more than 7 000 rpm (without load),

—	with a nominal voltage of 12 V (± 4 V),

—	with a maximum power of 13,78 W ( at 3,09 A),

—	with a specified temperature range from -40°C to 160°C,

—	with a gear connection,

—	with a mechanical attachment interface,

—	with 2 electrical connections,

—	with a maximum torque of 100 Nm

0 %

-

31.12.2026

0.7198

ex 8501 10 99

58

DC Motor :

—	with a speed rotation of not more than 6 500 rpm (without load),

—	with a nominal voltage of 12 V (± 4 V),

—	with a maximal power below than 20 W,

—	with a specified temperature range from -40°C to 160°C,

—	with a worm gear drive,

—	with a mechanical attachment interface,

—	with 2 electrical connections,

—	with a maximum torque of 75 Nm

0 %

-

31.12.2026

0.5846

ex 8501 10 99

60

DC motor:

—	with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded

—	with a power supply voltage of 100 V or more but not more than 240 V

for use in the manufacture of electric fryers (1)

0 %

-

31.12.2022

0.6858

ex 8501 10 99

64

DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:

—	with Ingress Protection (IP) standard of IP69,

—	with a rotor speed of not more than 6 500 rpm when not loaded,

—	with a rated voltage of 12,0 V (± 0,1),

—	of a specified temperature range of – 40 °C or more but not more than + 165 °C,

—	with or without a connecting pinion,

—	with or without an engine connector,

—	with or without a flange,

—	with a diameter of not more than 40 mm (not including the flange),

—	with an overall height of not more than 90 mm (from the base to the pinion)

0 %

-

31.12.2026

0.6880

ex 8501 10 99

65

Electric turbocharger actuator, with:

—	a DC motor,

—	an integrated gear mechanism,

—	a (pulling)force of 200 N or more at a minimum of 140°C elevated ambient temperature,

—	a (pulling) force of 250 N or more in each position of its stroke,

—	an effective stroke of 15 mm or more but not more than 25 mm,

—	with or without an on-board diagnostics interface

0 %

-

31.12.2025

0.6115

ex 8501 10 99

70

DC stepping motor, with:

—	a two-phase winding,

—	a rated voltage of 9 V or more, but not more than 16,0 V,

—	of a specified temperature range of - 40 °C or more but not more than + 105 °C,

—	with or without connection pinion,

—	with or without motor drive connector

0 %

-

31.12.2023

0.6627

ex 8501 10 99

75

Permanently excited DC motor with

—	a multiple-phase winding,

—	an external diameter of 28 mm or more but not more than 35 mm,

—	a rated speed of not more than 12 000 rpm,

—	a power supply voltage of 8 V or more but not more than 27 V

0 %

-

31.12.2025

0.2838

ex 8501 10 99

79

DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20 °C to + 70 °C

0 %

-

31.12.2023

0.4555

ex 8501 10 99

80

DC stepping motor, with:

—	an angle of step of 7,5° (± 0,5°),

—	a pull-out torque at 25 °C of 25 mNm or more,

—	a pull-out pulse rate of 1 500 pps or more,

—	a two-phase winding, and

—	a rated voltage of 10,5 V or more, but not more than 16,0 V

0 %

-

31.12.2023

0.7250

ex 8501 20 00

30

Universal AC/DC motor with

—	a rated output of 1,2 kW,

—	a supply voltage of 230 V, and

—	engine brake,

—	assembled to a reduction gear with output shaft, which is contained in a plastic housing

for use as electric drive of lawnmower blades (1)

0 %

-

31.12.2022

0.5954

ex 8501 31 00

45

DC motors, brushless, with:

—	an external diameter of 90 mm or more, but not more than 110 mm,

—	a rated speed of not more than 3 680 rpm,

—	an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C,

—	a supply voltage of 12 V,

—	a torque of not more than 5,67 Nm,

—	a rotor position sensor,

—	an electronic star-point relay, and

—	for use with an electric power steering control module

0 %

-

31.12.2023

0.5577

ex 8501 31 00

50

DC motors, brushless, with:

—	an external diameter of 80 mm or more, but not more than 200 mm,

—	a supply voltage of 9 V or more, but not more than 16 V,

—	an output at 20 °C of 300 W or more, but not more than 750 W,

—	a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

—	a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,

—	with or without a pulley,

—	with or without an electronic power steering sensor/controller

0 %

-

31.12.2022

0.5978

ex 8501 31 00

ex 8501 32 00

55

40

DC motor with or without commutator, with

—	an external diameter of 24,2 mm or more, but not more than 140 mm,

—	a rated speed of 3 300 rpm or more, but not more than 26 200 rpm,

—	a rated supply voltage of 3,6 V or more, but not more than 230 V,

—	an output power of more than 37,5 W , but not more than 2 400 W,

—	a free load current of not more than 20,1 A,

—	a maximum efficiency of 50 % or more,

for driving hand-held power tools or lawn mowers

0 %

-

31.12.2023

0.4731

ex 8501 31 00

58

Permanently excited DC motor with:

—	an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,

—	a rated speed of not more than 15 000 rpm,

—	an output of 45 W or more but not more than 400 W, and

—	a supply voltage of 9 V or more but not more than 50 V,

—	whether or not a multiple-phase winding,

—	whether or not with a drive disc,

—	whether or not with a crankcase,

—	whether or not with a fan,

—	whether or not with a cap assembly,

—	whether or not with a sun gear,

—	whether or not with a speed and rotational direction encoder,

—	whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,

—	whether or not with a mounting flange

0 %

-

31.12.2024

0.6809

ex 8501 31 00

ex 8501 32 00

63

65

Ready for installation in vehicles or equipment of headings 8432 and 8433 , brushless and permanently excited direct current motor with:

—	a specified speed of not more than 4 100 rpm,

—	a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with a minimum output of 750 W but not more than 1,55 kW (at 36 V),

—	a flange diameter of 85 mm or more but not more than 200 mm,

—	a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,

—	a housing length of not more than 265 mm, measured from the flange to the outer ending,

—	a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),

0 %

-

31.12.2025

—	a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and

—	surface magnets,

—	whether or not with electronic power steering controller,

—	whether or not with pulley,

—	whether or not with rotor position sensor

0.4855

ex 8501 33 00

ex 8501 40 80

ex 8501 53 50

30

50

10

Electric drive for motor vehicles, with an output of not more than 315 kW:

—	with an AC or DC motor with or without transmission,

—	with or without power electronics

0 %

-

31.12.2026

0.8188

ex 8501 40 20

35

Electric AC motor, single-phase, with:

—	a rated power of 120 W or more but not more than 150 W,

—	an input power of 280 W or more but not more than 350 W,

—	an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm,

—	a rated speed of 2 680 rpm or more but not more than 3 000 rpm,

—	a weight of 4,2 kg or more but not more than 4,6 kg,

—	pulleys, a spindle and a tachometer,

for use in the manufacture of home appliance products (1)

0 %

-

31.12.2026

0.8189

ex 8501 40 20

45

Electric AC motor, single-phase, with:

—	a rated power of 275 W or more, but not more than 325 W,

—	an input power of 600 W or more but not more than 700 W,

—	an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,

—	a rated speed of 15 000 rpm or more but not more than 20 000 rpm,

—	a weight of 4,2 kg or more,

—	a pulley and a tachometer,

for use in the manufacture of home appliance products (1)

0 %

-

31.12.2026

0.8191

ex 8501 40 20

50

Electric AC motor, single-phase, with:

—	a rated power of 300 W or more but not more than 370 W,

—	an input power of 600 W or more but not more than 700 W,

—	an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,

—	a rated speed of 15 000 rpm or more but not more than 19 000 rpm,

—	a weight of 4,8 kg or more,

—

a pulley,

for use in the manufacture of home appliance products (1)

0 %

-

31.12.2026

0.8192

ex 8501 40 20

55

Electric AC motor, single-phase, with:

—	a rated power of 275 W or more, but not more than 325 W,

—	an input power of 600 W or more but not more than 700 W,

—	an external diameter without bracket and connector of 160 mm or more but not more than 180 mm,

—	a rated speed of 15 000 rpm or more but not more than 19 000 rpm,

—	a weight of not more than 4,4 kg,

—

a pulley,

for use in the manufacture of home appliance products (1)

0 %

-

31.12.2026

0.8193

ex 8501 40 20

60

Electric AC motor, single-phase, with:

—	a rated power of 275 W or more but not more than 325 W,

—	an output power of 550 W or more but not more than 600 W,

—	an input power of 800 W or more but not more than 1 000 W,

—	an external diameter of more than 150 mm but not more than 170 mm without the bracket,

—	a rated speed of more than 16 000 rpm but not more than 18 000 rpm,

—	a weight of 3,4 kg or more but not more than 3,7 kg,

—

a pulley,

for use in the manufacture of home appliance products (1)

0 %

-

31.12.2026

0.5329

ex 8501 51 00

ex 8501 52 20

30

50

AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with:

—	an output of 340 W or more but not more than 7,4 kW,

—	a flange of dimensions of not more than 180 mm × 180 mm, and

—	a length from flange to extreme end of resolver of not more than 271 mm

0 %

-

31.12.2026

0.8190

ex 8501 51 00

40

Electric AC motor, three-phase, with:

—	a rated power of 280 W or more but not more than 320 W,

—	an output power of 480 W or more but not more than 540 W,

—	an input power of 800 W or more but not more than 900 W,

—	an external diameter of 150 mm or more but not more than 170 mm,

—	a rated speed of 15 000 rpm or more but not more than 20 000 rpm,

—	a weight of 6 kg or more but not more than 6,4 kg,

—	a pulley and a tachometer,

for use in the manufacture of home appliance products (1)

0 %

-

31.12.2026

0.6511

ex 8501 53 50

20

AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with:

—	a torque output of 200 Nm or more, but not more than 400 Nm,

—	a power output of 50 kW or more, but not more than 200 kW ,

—	a rotation speed of no more than 15 000 rpm,

for use in the manufacture of electric vehicles (1)

0 %

-

31.12.2024

0.8129

ex 8501 53 50

30

Permanent magnet synchronous traction motor, with:

—	a continuous power of 110 kW or more but not more than 180 kW,

—	a liquid cooled system,

—	a total length of 500 mm or more but not more than 650 mm,

—	a total width of 600 mm or more but not more than 700 mm,

—	a total height of 550 mm or more but not more than 650 mm,

—	weighing of not more than 350 kg,

—	3 suspension points

0 %

-

31.12.2025

0.5633

ex 8501 62 00

30

Fuel cell system

—	consisting of at least phosphoric acid fuel cells,

—	in a housing with integrated water management and gas treatment,

—	for permanent, stationary energy supply

0 %

-

31.12.2022

0.8130

ex 8501 62 00

40

AC, 3-phase generator, with:

—	a continuous power of 147 kVA or more but not more than 222 kVA,

—	a continuous torque of 650 Nm or more but not more than 900 Nm,

—	a maximum working speed of 2 700 revolutions per minute (rpm),

—	a liquid cooled system,

—	a length of 100 mm or more but not more than 200 mm,

—	a width of 550 mm or more but not more than 650 mm,

—	a height of 550 mm or more but not more than 650 mm,

—	weighing of not more than 150 kg

0 %

-

31.12.2025

0.2837

ex 8503 00 91

ex 8503 00 99

31

32

Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing

0 %

p/st

31.12.2023

0.2836

ex 8503 00 99

31

Stamped collector of an electric motor, having an external diameter of not more than 16 mm

0 %

p/st

31.12.2023

0.4599

ex 8503 00 99

33

Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm

0 %

p/st

31.12.2026

0.4601

ex 8503 00 99

34

Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm

0 %

p/st

31.12.2024

0.7496

ex 8503 00 99

37

Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with:

—	diameter of the rotor body of 17 mm or more but not more than 37 mm,

—	length of the rotor body of 12 mm or more but not more than 36 mm,

—	shaft length of 52 mm or more but not more than 82 mm

0 %

-

31.12.2023

0.5783

ex 8503 00 99

40

Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501 (1)

0 %

p/st

31.12.2022

0.6161

ex 8503 00 99

55

Stator for brushless motor, with:

—	an internal diameter of 206,6 mm (± 0,5),

—	an external diameter of 265,0 mm (± 0,2), and

—	a width of 37,2 mm or more but not more than 47,8 mm,

of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

0 %

p/st

31.12.2025

0.6379

ex 8503 00 99

60

Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)

0 %

p/st

31.12.2024

0.7760

ex 8503 00 99

65

Rotor body of stacked electrical sheet having:

—	a diameter of 18 mm or more but not more than 35 mm, and

—	a length of 20 mm or more but not more than 65 mm

0 %

-

31.12.2024

0.7761

ex 8503 00 99

75

Stator body of stacked electrical sheet having:

—	an inner diameter of 18 mm or more but not more than 35 mm,

—	an outer diameter of 35 mm or more but not more than 65 mm, and

—	a length of 20 mm or more but not more than 65 mm,

—	whether or not incorporated in a housing

0 %

-

31.12.2024

0.7758

ex 8503 00 99

80

Steel motor housing having:

—	an inner diameter of 35 mm or more but not more than 65 mm,

—	an outer diameter of 35 mm or more but not more than 70 mm, and

—	a length of 35 mm or more but not more than 150 mm

0 %

-

31.12.2024

0.7549

ex 8504 31 80

15

Electrical Transformer with

—	a capacity of 192 Watts or 216 Watts

—	dimensions of not more than 27,1 x 26,6 x 18 mm

—	an operating temperature range of – 40 °C or more, but not more than + 125 °C

—	three or four inductively coupled copper wire windings and

—	9 connection pins at the bottom

0 %

-

31.12.2023

0.7548

ex 8504 31 80

25

Electrical Transformer with

—	a capacity of 432 Watts

—	dimensions of not more than 24 mm x 21 mm x19 mm

—	an operating temperature range of – 20 °C or more, but not more than + 85 °C

—	two windings and

—	5 connection pins at the bottom

0 %

-

31.12.2023

0.4450

ex 8504 31 80

30

Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters (1)

0 %

-

31.12.2023

0.7547

ex 8504 31 80

35

Electrical Transformer with

—	a capacity of 433 Watts

—	dimensions of not more than 37,3 x 38,2 x 28,5 mm

—	an operating temperature range of – 40 °C or more, but not more than + 125 °C

—	four inductively coupled copper wire windings and

—	13 connection pins at the bottom

0 %

-

31.12.2023

0.5598

ex 8504 31 80

40

Electrical transformers:

—	with a capacity of 1 kVA or less

—	without plugs or cables,

for internal use in the manufacture of set top boxes and TVs (1)

0 %

-

31.12.2022

0.7551

ex 8504 31 80

45

Electrical Transformer with:

—	a capacity of 0,2 Watts,

—	dimensions of not more than 15 mm x 15,5 mm x 14 mm,

—	an operating temperature range of – 10 °C or more, but not more than + 125 °C,

—	two inductively coupled copper wire windings,

—	5 connection pins at the bottom, and

—	a copper shielding

0 %

-

31.12.2023

0.7000

ex 8504 31 80

50

Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (1)

0 %

-

31.12.2026

0.7764

ex 8504 31 80

55

Electrical transformer with:

—	a capacity of 0,22 kVA or more, but not more than 0,24 kVA,

—	an operating temperature range of + 10°C or more, but not more than + 125°C,

—	four or five inductively coupled copper wire windings,

—	11 or 12 connection pins at the bottom, and

—	dimensions of not more than 32 mm x 37,8 mm x 25,8 mm

0 %

-

31.12.2024

0.7029

ex 8505 11 00

47

Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:

—	a length of 9 mm or more but not more than 105 mm,

—	a width of 5 mm or more but not more than 105 mm, and

—	a height of 2 mm or more but not more than 55 mm

0 %

-

31.12.2026

0.5584

ex 8505 11 00

50

Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:

—	a length of 15 mm or more but not more than 52 mm,

—	a width of 5 mm or more but not more than 42 mm,

of a kind to be used in the manufacture of electric servomotors for industrial automation

0 %

p/st

31.12.2022

0.7567

ex 8505 11 00

53

Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with

—	a length of 97,5 mm or more, but not more than 225 mm

—	a diameter of 19 mm or more, but not more than 25 mm

0 %

-

31.12.2023

0.5585

ex 8505 11 00

63

Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with

—	an external diameter of not more than 45 mm,

—	a height of not more than 45 mm,

of a kind used in the manufacture of permanent magnets after magnetisation

0 %

p/st

31.12.2022

0.3740

ex 8505 11 00

65

Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having

—	a length of not more than 140 mm,

—	a width of not more than 90 mm and

—	a thickness of not more than 55 mm,

or in the shape of curved rectangle (tile type) having

—	a length of not more than 75 mm,

—	a width of not more than 40 mm,

0 %

p/st

31.12.2023

—	a thickness of not more than 7 mm and

—	a radius of curvature of more than 86 mm but not more than 241 mm

or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre

0.7788

ex 8505 11 00

68

Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:

—	a length of 13,8 mm or more but not more than 45,2 mm,

—	a width of 7,8 mm or more but not more than 25,2 mm,

—	a height of 1,3 mm or more but not more than 4,7 mm

0 %

-

31.12.2024

0.5948

ex 8505 11 00

70

Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet

—	whether or not containing a hole in the centre,

—	with a diameter of not more than 90 mm,

of a kind used in car loudspeakers

0 %

-

31.12.2023

0.6857

ex 8505 11 00

ex 8505 19 90

73

35

Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:

—	a length of 5 mm or more, but not more than 60 mm,

—	a width of 5 mm or more, but not more than 40 mm,

—	a thickness of 3 mm or more, but not more than 15 mm

0 %

p/st

31.12.2022

0.6347

ex 8505 11 00

75

A quarter sleeve intended to become permanent magnet after magnetization,

—	consisting of at least neodymium, iron and boron,

—	with a width of 9,1 mm or more but not more than 10,5 mm,

—	with a length of 20 mm or more but not more than 30,1 mm,

of a kind used on rotors for the manufacture of fuel pumps

0 %

p/st

31.12.2024

0.7789

ex 8505 19 10

20

Arc segments of permanent magnets of agglomerated ferrite, with:

—	a length of 16,8 mm or more, but not more than 110,2 mm,

—	a width of 14,8 mm or more, but not more than 75,2 mm,

—	a thickness of 4,8 mm or more, but not more than 13,2 mm,

for use in the manufacture of electromotor rotors for ventilation and air-conditioning systems (1)

0 %

-

31.12.2024

0.5937

ex 8505 19 90

30

Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between245 mT and 470 mT

0 %

-

31.12.2023

0.7299

ex 8505 19 90

50

Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation

—	whether or not with bevelled edges

—	of a length of 27 mm or more but not more than 32 mm (± 0,15 mm),

—	of a width of 8,5 mm or more but not more than 9,5 mm

—	(+0,05 mm / -0,09 mm),

—	of a thickness of 5,5 mm or more but not more than 5,8 mm

—	(+0/-0,2 mm), and

—	of a weight of 6,1 g or more but not more than 8,3 g

0 %

p/st

31.12.2022

0.7511

ex 8505 19 90

60

Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, to intended to become permanent magnet after magnetisation with the following dimentions:

—	a length of 10 mm or more but not more than 100 mm (± 1 mm),

—	a width of 10 mm or more but not more than 100 mm (± 1 mm),

—	a thickness of 2 mm or more but not more than 15 mm (± 0,15 mm)

0 %

-

31.12.2023

0.4029

ex 8505 20 00

30

Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1)

0 %

p/st

31.12.2023

0.8095

ex 8505 90 90

20

Electromagnetic clutch coil in a cylindrical metal housing:

—	the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,

—	the coil is made of copper wire,

—	with a weight of 0,4 kg or more but not more than 0,7 kg,

—	with a width of 22 mm or more but not more than 25 mm,

—	with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,

—	with an external diameter of 88 mm or more but not more than 96 mm,

—	without plunger,

—	with one connector

0 %

p/st

31.12.2025

0.6855

ex 8506 50 10

10

Lithium cylindrical primary cells with:

—	a diameter of 14,0 mm or more but not more than 26,0 mm,

—	a length of 2,2 mm or more but not more than 51 mm,

—	a voltage of 1,5 V or more, but not more than 3,6 V,

—	a capacity of 0,15 Ah or more, but not more than 5,00 Ah

for use in the manufacture of telemetry and medical devices, electronic meters or remote controls (1)

0 %

-

31.12.2023

0.7416

ex 8506 50 30

10

Lithium manganese dioxide cell, with:

—	a diameter of 20 mm or more but not more than 25 mm

—	a length of 3 mm or more but not more than 6 mm

—	a voltage of 3 V or more but not more than 3,4 V

—	a capacity of 200 mAh or more but not more than 600 mAh

—	an automotive test temperature range from -40°C to +125°C

for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS) (1)

0 %

-

31.12.2022

0.2490

ex 8506 50 90

10

Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V

0 %

-

31.12.2023

0.2488

ex 8506 50 90

30

Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah

0 %

-

31.12.2023

0.5180

ex 8506 90 00

10

Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1)

0 %

-

31.12.2023

0.6685

ex 8507 60 00

15

Cylindrical lithium-ion-accumulators or modules with:

—	a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

—	a nominal voltage of 36 V or more, but not more than 48 V,

—	a power of 300 Wh or more, but not more than 648 Wh,

for use in the manufacture of electric bicycles (1)

1,3 %

-

31.12.2022

0.6625

ex 8507 60 00

17

Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:

—	a rated voltage of 12 V,

—	a length of 350 mm or more but not more than 355 mm,

—	a width of 170 mm or more but not more than 180 mm,

—	a height of 180 mm or more but not more than 195 mm,

—	weighing 10 kg or more but not more than 15 kg,

—	a nominal charge of 60 Ah or more, but not more than 80 Ah

1,3 %

-

31.12.2022

0.7663

ex 8507 60 00

18

Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:

—	a length of not more than 1 600 mm,

—	a width of not more than 448 mm,

—	a height of not more than 395 mm,

—	a nominal voltage of 280 V or more but not more than 400 V,

—	a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,

—	a charging voltage of 110 V or more but not more than 230 V, and

—	containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,

for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 (1)

1,3 %

-

31.12.2022

0.7717

ex 8507 60 00

22

Integrated battery system in a metal case with holders, consisting of:

—	a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),

—	Battery Management System,

—

a relay,

—	a low voltage converter (DC/DC),

—	at least one connector,

for use in the manufacture of hybrid motor vehicles (1)

1,3 %

-

31.12.2022

0.2907

ex 8507 60 00

30

Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1)

1,3 %

-

31.12.2022

0.6703

ex 8507 60 00

33

Lithium-ion accumulator, with:

—	a length of 150 mm or more, but not more than 1 000 mm,

—	a width of 100 mm or more, but not more than 1 000 mm,

—	a height of 200 mm or more, but not more than 1 500 mm,

—	a weight of 75 kg or more, but not more than 200 kg,

—	a nominal capacity not less than 150Ah and not more than 500 Ah,

—	a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)

1,3 %

-

31.12.2022

0.6702

ex 8507 60 00

37

Lithium-ion accumulator, with:

—	a length of 1 200 mm or more, but not more than 2 000 mm,

—	a width of 800 mm or more, but not more than 1 300 mm,

—	a height of 2 000 mm or more, but not more than 2 800 mm,

—	a weight of 1 800 kg or more, but not more than 3 000 kg,

—	a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah

1,3 %

-

31.12.2022

0.8115

ex 8507 60 00

48

Integrated battery system in a metal case with holders, consisting of:

—	a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,

—	Battery Management System,

—	a power relay,

—	a cooling system,

—	four connectors,

for use in the manufacture of Mild-hybrid (mHEV) motor vehicles (1)

1,3 %

-

31.12.2022

0.5548

ex 8507 60 00

50

Modules for the assembly of batteries of ion lithium electric accumulators with:

—	a length of 298 mm or more, but not more than 500 mm,

—	a width of 33,5 mm or more, but not more than 209 mm,

—	a height of 75 mm or more, but not more than 228 mm,

—	a weight of 3,6 kg or more, but not more than 17 kg, and

—	a nominal energy of 458 Wh or more, but not more than 2 158 Wh

1,3 %

-

31.12.2022

0.7641

ex 8507 60 00

58

Prismatic lithium-ion electric accumulator with:

—	a width of 120,0 mm or more but not more than 305,0 mm,

—	a thickness of 12,0 mm or more but not more than 67,0 mm,

—	a height of 72,0 mm or more but not more than 126,0 mm,

—	a nominal voltage of 3,6 V or more but not more than 3,75 V, and

—	a nominal capacity of 6,9 Ah or more not more than 265 Ah,

for use in the manufacture of rechargeable electric vehicle batteries (1)

1,3 %

-

31.12.2022

0.5342

ex 8507 60 00

65

Cylindrical lithium ion cell with

—	a nominal diameter of 9,8 mm or more, but not more than 14,5 mm,

—	a nominal voltage of 3,0 VDC or more, but not more than 4,0 VDC, and

—	a nominal capacity of 200 mAh or more, but not more than 1 200 mAh

1,3 %

-

31.12.2022

0.7888

ex 8507 60 00

68

Lithium-ion accumulator in a metal housing, with

—	a length of 65 mm or more, but not more than 225 mm,

—	a width of 10 mm or more, but not more than 75 mm,

—	a height of 60 mm or more, but not more than 285 mm,

—	a nominal voltage of 2,1 V or more, but not more than 3,8 V, and

—	a nominal capacity of 2,5 Ah or more, but not more than 325 Ah

1,3 %

-

31.12.2022

0.5356

ex 8507 60 00

75

Rectangular lithium-ion-accumulator with:

—	a metal casing,

—	a length of 147,85 mm or more but not more than 173,15 mm,

—	a width of 17,4 mm or more but not more than 21,1 mm,

—	a height of 90,85 mm or more but not more than 95,15 mm,

—	a nominal voltage of 3,3 V or more but not more than 3,65 V, and

—	a nominal capacity of 17,5 Ah or more

1,3 %

-

31.12.2022

0.6753

ex 8507 60 00

77

Lithium-ion rechargeable batteries, with:

—	a length of 700 mm or more, but not more than 2 820 mm,

—	a width of 935 mm or more, but not more than 1 660 mm,

—	a height of 85 mm or more, but not more than 700 mm,

—	a weight of 250 kg or more, but not more than 700 kg,

—	a power of not more than 175 kWh,

—	a nominal voltage of 400 V

1.3 %

-

31.12.2022

0.5014

ex 8508 70 00

ex 8537 10 98

20

98

Electronic circuit cards that:

—	are connected by wire or radio frequency to each other and the motor controller card, and

—	regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

—	whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

0 %

p/st

31.12.2025

0.6304

ex 8511 30 00

30

Igniter integrated coil assembly with:

—	an igniter,

—	a coil on plug assembly with an integrated mounting bracket,

—	a housing,

—	a length of 90 mm or more but not more than 200 mm (± 5 mm),

—	an operating temperature of -40 °C or more but not more than 130 °C,

—	a voltage of 10,5 V or more, but not more than 16 V

0 %

p/st

31.12.2024

0.7024

ex 8511 30 00

55

Ignition coil:

—	with a length of 50 mm or more, but not more than 200 mm,

—	with an operating temperature of – 40 °C or more, but not more than 140 °C, and

—	with a voltage of 9 V or more, but not more than 16 V,

—	with or without connection cable,

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2026

0.6856

ex 8512 20 00

30

Lighting module, containing at least:

—

two LEDs,

—	glass or plastic lenses, focusing/scattering the light emitted by the LEDs,

—	reflectors redirecting the light emitted by the LEDs,

in an aluminium housing with a radiator, mounted at a bracket with an actuator

0 %

p/st

31.12.2025

0.6503

ex 8512 20 00

40

Fog lamp with a galvanised inner surface, containing:

—	a plastic holder with three or more brackets,

—	one or more 12 V bulbs,

—	a connector,

—	a plastic cover,

—	whether or not with a connection cable

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2024

0.6562

ex 8512 20 00

60

Information screen displaying:

—	at least time, date and status of safety features in a vehicle, or

—	safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit,

with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87

0 %

p/st

31.12.2024

0.6504

ex 8512 30 90

10

Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:

—

coil,

—

magnet,

—	metal membrane,

—	connector,

—

holder

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.6863

ex 8512 30 90

20

Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:

—	a printed circuit board,

—	a connector,

—	whether or not a metal holder,

for use in the manufacture of goods of chapter 87 (1)

0 %

p/st

31.12.2022

0.7361

ex 8512 30 90

30

Sound alarm device for protection against burglary into the vehicle:

—	with an operating temperature of – 45 °C or more, but not more than + 95 °C,

—	with a voltage of 9 V or more but not more than 16 V,

—	in a plastic housing,

—	whether or not with a metal holder

for use in the manufacture of motor vehicles (1)

0 %

-

31.12.2022

0.5983

ex 8512 40 00

ex 8516 80 20

10

20

Car door mirror heating foil:

—	with two electrical contacts,

—	with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),

—	with a protective paper film on both sides

0 %

-

31.12.2023

0.6522

ex 8514 20 80

ex 8516 50 00

ex 8516 60 80

10

Cavity assembly comprising at least:

—	a transformer with an input of not more than 240 V and an output of not more than 3 000 W

—	an AC or DC fan motor with an output of not more than 42 watts

—	a housing made of stainless steel

—	with or without a magnetron of a microwave output power of not more than 900 W

for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80 (1)

0 %

p/st

31.12.2024

0.4732

ex 8516 90 00

60

Ventilation sub-assembly of an electric deep-fat fryer:

—	fitted with a motor having a power rating of 8 W at 4 600 rpm,

—	governed by an electronic circuit,

—	operating at ambient temperatures above 110 °C,

—	fitted with a thermoregulator

0 %

p/st

31.12.2024

0.5845

ex 8516 90 00

70

Inner pot:

—	containing side and central openings,

—	of annealed aluminium,

—	with a ceramic coating, heat resistant to more than 200° C

for use in the manufacture of an electric fryer (1)

0 %

p/st

31.12.2022

0.6521

ex 8516 90 00

80

Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80 (1)

0 %

p/st

31.12.2024

0.4733

ex 8521 90 00

20

Digital video recorder:

—	without a hard disk drive,

—	with or without a DVD-RW drive,

—	with either motion detection or capability of motion detection through IP connectivity via LAN connector

—	with or without a USB serial port,

for use in the manufacture of closed-circuit television (CCTV) surveillance systems (1)

0 %

-

31.12.2024

0.7972

ex 8527 29 00

40

Satellite radio receiver module:

—	with a rectangular shape of dimensions 41,7 x 32,4 x 3,85 mm (± 25 %),

—	comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,

—	being able to process radio frequency signals,

—	with a medium frequency unit,

for use in the manufacture of products falling under heading 8527 , 8528 , 8529 (1)

0 %

-

31.12.2025

0.6316

ex 8528 59 00

20

Liquid crystal display colour video monitor assembly mounted on a frame,

—	excluding those combined with other apparatus,

—	comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,

used for permanent incorporation or permanent mounting into entertainment systems for vehicles (1)

0 %

-

31.12.2024

0.6689

ex 8529 90 65

28

Electronic assembly comprising at least:

—	a printed circuit board with,

—	one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,

—	operating memory,

—	with or without flash memory,

—	with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,

—	with or without sockets and plugs for connecting a LCD-display, a LED lighting and a control panel

0 %

p/st

31.12.2022

0.2434

ex 8529 90 65

ex 8548 00 90

30

44

Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing

0 %

p/st

31.12.2023

0.4140

ex 8529 90 65

50

Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528 (1)

0 %

p/st

31.12.2026

0.4893

ex 8529 90 65

ex 8529 90 92

65

53

Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

0 %

p/st

31.12.2025

0.4305

ex 8529 90 65

75

Modules comprising at least semiconductor chips for:

—	the generation of driving signals for pixel addressing, or

—	driving addressing pixels

0 %

p/st

31.12.2022

0.3966

ex 8529 90 92

ex 8548 00 90

15

60

LCD modules,

—	solely consisting of one or more TFT glass or plastic cells,

—	not combined with touch screen facilities,

—	with one or more printed circuits boards with control electronics for pixel addressing only,

—	with or without backlight unit and

—	with or without inverters

0 %

p/st

31.12.2023

0.4890

ex 8529 90 92

25

LCD modules, not combined with touch screen facilities, solely consisting of:

—	one or more TFT glass or plastic cells,

—	a die cast heat sink,

—	a backlight unit,

—	one printed circuit board with micro controller, and

—	LVDS (Low Voltage Differential Signalling) interface,

for use in the manufacture of radios for motor vehicles (1)

0 %

p/st

31.12.2025

0.7369

ex 8529 90 92

33

LCD modules combined with touch screen facilities

—	solely consisting of one or more TFT cells,

—	with a diagonal measurement of the screen of 10,7 cm or more but not more than 36 cm,

—	with or without LED backlight,

—	with control electronics for pixel addressing only,

—	without an EPROM memory (Erasable Programmable Read-only Memory),

—	with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface

used solely for installation in motor vehicles of Chapter 87 (1)

0 %

-

31.12.2022

0.6654

ex 8529 90 92

37

Fastening and covering ledges of aluminium alloy containing:

—	silicon and magnesium,

—	with a length of 300 mm or more but not more than 2 200 mm,

specifically shaped for use in the manufacture of TV sets (1)

0 %

-

31.12.2025

0.2425

ex 8529 90 92

42

Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528 (1)

0 %

p/st

31.12.2023

0.3198

ex 8529 90 92

43

Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply

0 %

p/st

31.12.2023

0.4030

ex 8529 90 92

45

Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats

0 %

p/st

31.12.2023

0.4609

ex 8529 90 92

47

Area image sensors (‘progressive scan’ Interline CCD-Sensor or cmOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel

0 %

p/st

31.12.2024

0.4616

ex 8529 90 92

ex 8536 69 90

49

83

AC socket with a noise filter, composed of:

—	AC socket (for power cord connection) of 230 V,

—	integrated noise filter composed of capacitors and inductors,

—	cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

whether or not equipped with a metal support, which joins the AC socket to the PDP TV set

0 %

p/st

31.12.2024

0.7489

ex 8529 90 92

51

OLED modules, consisting of one or more TFT glass or plastic cells,

—	a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm,

—	with a thickness of not more than 55mm

—	containing organic material

—	with control electronic for pixel addressing only,

—	with V-by-One Interface and with or without a plug for power supply,

—	with or without back cover

of a kind used in the manufacture of TV sets and monitors

0 %

-

31.12.2023

0.6343

ex 8529 90 92

55

OLED modules, consisting of

—	one or more TFT glass or plastic cells, containing organic material,

—	with or without combined touch screen facilities and

—	one or more printed circuit boards with control electronics for pixel addressing,

for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87 (1)

0 %

p/st

31.12.2024

0.5187

ex 8529 90 92

57

Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1)

0 %

p/st

31.12.2026

0.6629

ex 8529 90 92

63

LCD module

—	with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

—	with or without a touch screen,

—	with an LED backlight,

—	with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

—	with a plug for power supply and CAN and LVDS interfaces,

—	with or without electronic components for dynamic adjustments of colour,

—	in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

suitable for installation in motor vehicles of Chapter 87 (1)

0 %

p/st

31.12.2025

0.5018

ex 8529 90 92

67

Colour LCD display panel for LCD monitors of heading 8528 :

—	with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

—	with or without a touch screen,

—	with backlight, micro-controller,

—	with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

—	in a housing with or without a heat sink at the back of the housing,

—	without a signal-processing module,

—	whether or not with haptic and acoustical feedback,

for use in the manufacture of vehicles of Chapter 87 (1)

0 %

p/st

31.12.2025

0.5788

ex 8529 90 92

70

Rectangular fastening and covering frame:

—	of an aluminium alloy containing silicon and magnesium,

—	with a length of 500 mm or more but not more than 2 200 mm,

—	with a width of 300 mm or more but not more than 1 500 mm,

of a kind used for the production of TV sets

0 %

p/st

31.12.2022

0.8140

ex 8529 90 92

73

CMOS-Image sensor

—	with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),

—	to capture infra-red light reflected from objects,

in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)

0 %

-

31.12.2025

0.6781

ex 8529 90 92

85

Colour LCD module in a housing:

—	with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,

—	without touch screen,

—	with a backlight and micro-controller,

—	with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,

—	without a signal processing module,

—	with control electronics for pixel addressing only,

—	with a motorised mechanism for moving the display screen,

for permanent installation in vehicles of Chapter 87 (1)

0 %

p/st

31.12.2025

0.7048

ex 8536 41 10

20

Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less

0 %

-

31.12.2026

0.6180

ex 8536 41 90

40

Power relay with:

—	electromechanical and/or electromagnetical switching function,

—	a load current of 3 A or more but not more than 16 A,

—	a coil voltage of 5 V or more but not more than 24 V, and

—	a distance between the connector pins of the load circuit not more than 15,6 mm

0 %

p/st

31.12.2024

0.7052

ex 8536 49 00

40

Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts

0 %

-

31.12.2026

0.7796

ex 8536 49 00

50

Relay with:

—	a contact current carrying capacity of 5 A or more but not more than 15 A,

—	a nominal voltage of 80 V or more but not more than 270 V, and

—	outer dimensions of 19 mm x 15,2 mm x 15,5 mm,

for use in the manufacture of control boards for household appliances (1)

0 %

-

31.12.2024

0.5795

ex 8536 69 90

51

SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 (1)

0 %

p/st

31.12.2022

0.6849

ex 8536 69 90

60

Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors (1)

0 %

p/st

31.12.2022

0.4614

ex 8536 69 90

82

Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:

—	a pulse transformer, including a wide-band ferrite core,

—	a common mode coil,

—	a resistor,

—	a capacitor,

for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

p/st

31.12.2024

0.5028

ex 8536 69 90

84

Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 (1)

0 %

p/st

31.12.2025

0.5318

ex 8536 69 90

85

Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

p/st

31.12.2026

0.5316

ex 8536 69 90

86

High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

p/st

31.12.2026

0.5181

ex 8536 70 00

10

Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528 (1)

0 %

p/st

31.12.2026

0.7873

ex 8537 10 91

20

Electronic assembly containing:

—	a microprocessor,

—	a programmable memory and other electronic components mounted on a printed circuit,

—	with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,

for use in the manufacture of products of subheadings 8418 21 , 8418 29 , 8421 12 , 8422 11 , 8450 11 , 8450 12 , 8450 19 , 8451 21 , 8451 29 and 8516 60 (1)

0 %

-

31.12.2024

0.8085

ex 8537 10 91

45

Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:

—	a programmable memory,

—	a microprocessor,

—	at least one composite connector,

—	a voltage of 24 V,

—	with a length of 350 mm or more but not more than 400 mm,

—	with a width of 200 mm or more but not more than 250 mm,

—	with a height of 80 mm or more but not more than 120 mm,

—	in a metal housing

0 %

-

31.12.2025

0.6864

ex 8537 10 91

50

Fuse control module in a plastic housing with mounting brackets comprising:

—	sockets with or without fuses,

—	connecting ports,

—	a printed circuit board with embedded microprocessor, micro switch and relay,

of a kind used in the manufacture of goods of chapter 87

0 %

p/st

31.12.2025

0.7627

ex 8537 10 91

57

Programmable memory control board with:

—	4 or more stepper motor drivers,

—	4 or more outputs with MOSFET transistors,

—	a main processor,

—	3 or more inputs for temperature sensors,

—	for a voltage of 10 V or more but not more than 30 V,

for use in the manufacture of 3D printers (1)

0 %

-

31.12.2023

0.7609

ex 8537 10 91

59

Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:

—	a printed circuit board with programmable memory controller,

—	one single connector, and

—	working at 12 V

0 %

-

31.12.2023

0.6163

ex 8537 10 91

ex 8537 10 98

60

45

Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:

—	an AC power input of 208 V or more but not more than 400 V,

—	a logic power input of 24 V DC,

—	an automatic circuit breaker,

—	a main power switch,

—	internal or external electrical connectors and cables,

—	in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm,

of a kind used for manufacturing recycling or sorting machines

0 %

p/st

31.12.2023

0.7610

ex 8537 10 91

63

Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:

—	a printed circuit board with programmable memory controller,

—	a metallic housing,

—	one single connector,

—	working at 12V

0 %

-

31.12.2023

0.7360

ex 8537 10 91

65

Electronic control unit for optimal engine performance:

—	with a programmable memory,

—	with a voltage of 8 V or more but not more than 16 V,

—	with at least one composite connector,

—	in a metal housing,

—	whether or not with metal holders

for use in the manufacture of motor vehicles (1)

0 %

-

31.12.2022

0.7660

ex 8537 10 91

67

Electronic Engine Control Unit (ECU) with:

—	a printed circuit board (PCB),

—	12 Volts voltage,

—	reprogrammable,

—	a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2023

0.7251

ex 8537 10 91

70

Programmable motor memory controller for a voltage not exceeding 1 000 V, comprising at least:

—	a printed circuit with active and passive components,

—	an aluminium housing, and

—	multiple connectors

0 %

p/st

31.12.2022

0.6140

ex 8537 10 98

30

Motor bridge ICs without programmable memory consisting of:

—	one or more integrated circuits, not interconnected, on separate lead frames,

—	also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars

—	mounted in a plastic housing

0 %

p/st

31.12.2023

0.7194

ex 8537 10 98

33

Lever for control module under the steering wheel:

—	with several single or multi-positional electrical switches (push-button, rotary or other),

—	equipped with printed circuit boards and/or electrical cables,

—	for a voltage of 9 V or more but not more than 16 V,

of a kind used in the manufacture of motor vehicles of Chapter 87

0 %

p/st

31.12.2026

0.6889

ex 8537 10 98

35

Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:

—	2 rotary knobs

—	27 or more pushbuttons

—	LED lights

—	2 integrated circuits for receiving and sending of control signals via the LIN-bus

0 %

p/st

31.12.2025

0.6508

ex 8537 10 98

40

Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:

—	a length of 50 mm or more, but not more than 120 mm,

—	a width of 20 mm or more but not more than 40 mm,

—	a height of 30 mm or more, but not more than 120 mm,

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.6507

ex 8537 10 98

50

Electronic control unit BCM (Body Control Module) comprising

—	plastic box with printed circuit board and metal holder,

—	with voltage of 9V or more, but not more than 16V,

—	able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.6520

ex 8537 10 98

60

Electronic assembly consisting of:

—	a microprocessor,

—	light-emitting diode (LED) or liquid crystal display (LCD) indicators,

—	electronic components mounted on a printed circuit,

for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80 (1)

0 %

p/st

31.12.2024

0.7171

ex 8537 10 98

75

Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:

—	an antenna,

—	a connector,

—	a metal holder,

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2023

0.8132

ex 8537 10 98

80

Propulsion Control System with at least:

—	a DC/AC inverter,

—	a power of 190 kW or more but not more than 220 kW,

—	a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,

—	an integral control of all drive motor and generator traction system functions,

0 %

p/st

31.12.2025

—	a CAN communications interface with System Control Unit,

—	a liquid cooled system,

—	a length of 300 mm or more but not more than 950 mm,

—	a width of 350 mm or more but not more than 600 mm,

—	a height of 200 mm or more but not more than 350 mm,

—	a weight of 40 kg or more but not more than 90 kg

0.8124

ex 8537 10 98

88

Control panel for car radio and/or navigation control with:

—	electronic passive components,

—	at least two switches,

—

LEDs,

—	at least one connector,

—	whether or not warning triangle switch,

—	for a voltage not exceeding 16 V,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2025

0.3663

ex 8537 10 98

93

Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1)

0 %

p/st

31.12.2023

0.6866

ex 8538 90 91

ex 8538 90 99

20

50

Interior antenna for a car door locking system, comprising:

—	an antenna module in a plastic housing,

—	a connection cable with a plug,

—	at least two mounting brackets,

whether or not PCB including integrated circuits, diodes and transistors,

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2025

0.6397

ex 8538 90 99

ex 8547 20 00

30

10

Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint

0 %

p/st

31.12.2024

0.6399

ex 8538 90 99

40

Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more

0 %

p/st

31.12.2024

0.7195

ex 8538 90 99

60

Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87

0 %

p/st

31.12.2026

0.2580

ex 8540 20 80

91

Photomultiplier

0 %

-

31.12.2026

0.3959

ex 8540 71 00

20

Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516 50 00 (1)

0 %

-

31.12.2023

0.3445

ex 8540 89 00

91

Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons

0 %

-

31.12.2023

0.3443

ex 8540 89 00

92

Vacuum fluorescent display tube

0 %

-

31.12.2023

0.7409

ex 8540 91 00

20

Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having

—	a graphite carbon shield mounted in a mini-Vogel type system

—	separate pyrolytic carbon blocks used as heating elements and

—	a cathode temperature of less than 1 800 K at a filament current of 1,26 A

0 %

-

31.12.2022

0.7130

ex 8543 70 90

15

Laminated electrochromic film consisting of:

—	two outer layers of polyester,

—	a middle layer of acrylic polymer and silicone, and

—	two electric connection terminals

0 %

-

31.12.2026

0.2826

ex 8543 70 90

30

Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing

0 %

p/st

31.12.2023

0.7055

ex 8543 70 90

33

High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing

0 %

-

31.12.2026

0.2822

ex 8543 70 90

35

Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing

0 %

p/st

31.12.2023

0.2590

ex 8543 70 90

45

Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing

0 %

p/st

31.12.2023

0.3131

ex 8543 70 90

55

Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing

0 %

p/st

31.12.2023

0.2820

ex 8543 70 90

80

Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing

0 %

p/st

31.12.2023

0.2816

ex 8543 70 90

85

Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing

0 %

p/st

31.12.2023

0.4464

ex 8544 20 00

ex 8544 42 90

ex 8544 49 93

10

20

PET/PVC insulated flexible cable with:

—	a voltage of not more than 60 V,

—	a current of not more than 1 A,

—	a heat resistance of not more than 105 °C,

—	individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

—	a distance between conductors of not more than 0,5 mm and

—	a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

0 %

-

31.12.2023

0.6709

ex 8544 20 00

30

Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:

—	a coaxial cable,

—	two or more connectors, and

—	3 or more plastic clips for attachment to the dashboard

of a kind used in the manufacture of goods of Chapter 87

0 %

-

31.12.2026

0.6194

ex 8544 30 00

30

Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following;

—	a travel speed of not more than 24 km/h

—	a motor speed of not more than 4 500 rpm

—	hydraulic pressure of not more than 25 MPa

—	mass of not more than 50 metric tonnes

for use in the manufacture of vehicles of heading 8427 (1)

0 %

p/st

31.12.2023

0.6377

ex 8544 30 00

ex 8544 42 90

40

Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box

0 %

p/st

31.12.2024

0.7848

ex 8544 30 00

45

Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor - BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger car (1)

0 %

-

31.12.2024

0.7847

ex 8544 30 00

55

Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines of passenger cars (1)

0 %

-

31.12.2024

0.6710

ex 8544 30 00

ex 8544 42 90

60

50

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2025

0.6323

ex 8544 30 00

70

Multi-measurement wire harness:

—	of a voltage of 5 V or more but not more than 90 V,

—	capable of transmitting information

for use in the manufacture of vehicles of heading 8711 (1)

0 %

p/st

31.12.2024

0.6867

ex 8544 30 00

85

Extension two-core cable with two connectors, containing at least:

—	a rubber grommet,

—	a metal attachment bracket,

of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

0 %

p/st

31.12.2025

0.4980

ex 8544 42 90

10

Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:

—	a voltage of 1,25 V (± 0,25 V)

—	connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

—	outer screening shielding,

used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits

0 %

p/st

31.12.2023

0.7545

ex 8544 42 90

15

PVC isolated flexible eight wire cable with:

—	a length of not more than 2 100 mm

—	an operating voltage of 5V or more, but not more than 35V

—	a temperature resistance of not more than 80°C

—	either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end and

—	at least two stripped and tinned wires on the other end

—	whether or not with mounted rubber pad with integrated strain relief

0 %

-

31.12.2023

0.7538

ex 8544 42 90

25

PVC isolated flexible cable with:

—	a length of not more than 1 800 mm

—	an operating voltage of 5V or more, but not more than 35V

—	a heat resistance of not more than 80°C

—	an over-moulded 8 pin MiniFit male connector on one end

—	either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end

—	a over-moulded resistor inside the connector and

—	a moulded strain relief on the cable

—	whether or not with a over-moulded diode inside a connector

0 %

-

31.12.2023

0.7544

ex 8544 42 90

35

PVC isolated flexible six or eight wire cable with:

—	a length of not more than 1 300 mm

—	an operating voltage of 5V or more, but not more than 35V

—	a heat resistance of not more than 80°C

—	either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end and

—	either an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end

0 %

-

31.12.2023

0.6853

ex 8544 42 90

70

Electric conductors:

—	of a voltage of not more than 80 V,

—	with a length of not more than 120 cm,

—	fitted with connectors,

for use in the manufacture of hearing aids, accessory kits and speech processors (1)

0 %

p/st

31.12.2025

0.7173

ex 8544 42 90

80

12-wire connecting cable containing two connectors

—	of a voltage of 5 V,

—	with a length of not more than 300 mm

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2023

0.2424

ex 8544 49 93

10

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

0 %

p/st

31.12.2023

0.6861

ex 8544 49 93

30

Electric conductors:

—	of a voltage of not more than 80 V,

—	of a platinum-iridium-alloy,

—	coated with poly(tetrafluoroethylene),

—	without connectors,

for use in the manufacture of hearing aids, implants and speech processors (1)

0 %

m

31.12.2025

0.3144

ex 8548 00 90

41

Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing

0 %

p/st

31.12.2023

0.3193

ex 8548 00 90

43

Contact image sensor

0 %

p/st

31.12.2023

0.3763

ex 8548 00 90

48

Optical unit, containing at least

—	a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm

—	an optical lens

—	a ‘Recording Photodetector Integrated Circuit’ (PDIC)

—	a focussing and tracking actuator

0 %

p/st

31.12.2026

0.3965

ex 8548 00 90

65

LCD modules,

—	solely consisting of one or more TFT glass or plastic cells,

—	combined with touch screen facilities,

—	with one or more printed circuits boards with control electronics for pixel addressing only,

—	with or without backlight unit and

—	with or without inverters

0 %

p/st

31.12.2023

0.5183

ex 8549 13 20

ex 8549 14 20

10

Spent lithium-ion or nickel metal hydride electric accumulators

0 %

-

31.12.2023

0.7165

ex 8708 10 10

ex 8708 10 90

10

Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2026

0.6513

ex 8708 30 10

ex 8708 30 91

ex 8708 30 99

20

60

10

Motor powered brake actuation unit

—	with a rating of 13,5 V (± 0,5 V) and

—	a ball screw mechanism to control brake fluid pressure in the master cylinder

for use in the manufacture of electric motor vehicles (1)

0 %

p/st

31.12.2024

0.6590

ex 8708 30 10

ex 8708 30 91

40

30

Body of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.6502

ex 8708 30 10

ex 8708 30 91

60

20

Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2024

0.6707

ex 8708 30 10

ex 8708 30 91

70

40

Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2025

0.6869

ex 8708 40 20

ex 8708 40 50

20

10

Automatic hydrodynamic gearbox

—	with a hydraulic torque converter,

—	without transfer box and cardan shaft,

—	whether or not with front differential,

for use in the manufacture of motor vehicles of Chapter 87 (1)

0 %

p/st

31.12.2025

0.7253

ex 8708 40 20

30

Automatic gearbox with a hydraulic torque converter with:

—	at least eight gears,

—	an engine torque of 300 Nm or more, and

—	transverse or longitudinal installation

for use in the manufacture of motor vehicles of heading 8703 (1)

0 %

p/st

31.12.2022

0.7383

ex 8708 40 20

ex 8708 40 50

50

40

Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:

—	cast aluminium body,

—	differential gear,

—	2 electrical motors and gears,

with the dimensions of:

—	a width of 280 mm or more but not more than 470 mm,

—	a height of 350 mm or more but not more than 595 mm,

—	a length of 410 mm or more but not more than 690 mm,

for use in the manufacture of motor vehicles of Chapter 87 (1)

0 %

-

31.12.2022

0.7655

ex 8708 40 20

ex 8708 40 50

60

50

Automatic transmission assembly with rotary gear shifter with:

—	aluminium casting housing,

—	differential gear,

—	9 Speed automatic,

—	electronic range select gear selection system,

with dimensions of:

—	a width of 330 mm or more but not more than 420 mm,

—	a height of 380 mm or more but not more than 450 mm,

—	a length of 580 mm or more but not more than 690 mm,

for use in the manufacture of the vehicles in heading 87 (1)

0 %

-

31.12.2023

0.7856

ex 8708 40 20

ex 8708 40 50

70

60

Manual gearbox in cast aluminium housing for transverse installation with:

—	a width of not more than 480 mm,

—	a height of not more than 400 mm,

—	a length of not more than 550 mm,

—	five or six gears,

—	a differential gear,

—	an engine torque of 400 Nm or less,

for use in the manufacture of motor vehicles of Heading 8703 (1)

0 %

-

31.12.2024

0.7987

ex 8708 50 20

ex 8708 50 55

15

50

Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

0 %

-

31.12.2025

0.6648

ex 8708 50 20

ex 8708 50 99

20

10

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

—	of a length of 1 m or more but not more than 2 m,

—	of a weight of 6 kg or more but not more than 9 kg

0 %

p/st

31.12.2025

0.7988

ex 8708 50 20

ex 8708 50 99

25

45

Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:

—	6 ball tracks or more but not more than 8, with

—

a thread,

—	an external involute spline with 21 or more but not more than 38 teeth,

—	for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,

—	forged, turned, milled and hardened

0 %

-

31.12.2025

0.7989

ex 8708 50 20

ex 8708 50 99

35

50

Inboard constant velocity joint tripod housing, with:

—	an outer diameter of 67,0 mm or more but not more than 99,0 mm,

—	3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,

—	an external spline with 21 teeth or more but not more than 41,

—	forged, turned, rolled and hardened

0 %

-

31.12.2025

0.7990

ex 8708 50 20

ex 8708 50 99

45

55

Outboard constant velocity joint inner race, part of the vehicle’s drive system, with:

—	6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,

—	forged, turned, milled, broached and hardened

0 %

-

31.12.2025

0.7359

ex 8708 50 20

ex 8708 50 55

ex 8708 50 91

ex 8708 50 99

50

20

10

40

Double flange bearing of 3rd generation, for motor vehicles,

—	with double-row ball bearing,

—	whether or not with impulse (encoder) ring,

—	whether or not with antilock brake system (ABS) sensor,

—	whether or not with mounted screws,

for use in the manufacture of goods of chapter 87 (1)

0 %

-

31.12.2022

0.7991

ex 8708 50 20

ex 8708 50 99

55

60

Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with:

—	3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,

—	forged, turned, broached and hardened

0 %

-

31.12.2025

0.7581

ex 8708 50 20

ex 8708 50 99

60

15

Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:

—	at least an actuator,

—	whether or not an interior distribution by chain

0 %

-

31.12.2024

0.7692

ex 8708 50 20

ex 8708 50 99

65

20

Intermediate steel shaft connecting the gearbox with semi-axle with:

—	a length of 300 mm or more but not more than 650 mm,

—	a spline end on both sides,

—	whether or not with a pressed bearing in the case,

—	whether or not with a holder,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2023

0.7593

ex 8708 50 20

ex 8708 50 99

70

25

Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:

—	an outer diameter of 67,0 mm or more but not more than 84,5 mm,

—	3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,

—	sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,

—	spline with 21 teeth or more but not more than 35,

—	bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

0 %

-

31.12.2023

0.7640

ex 8708 50 20

ex 8708 50 99

75

35

Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:

—	an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,

—	an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,

—	a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and

—	with a grease compartment,

capable of working at constant speed at variable articulation angle not higher than 50 degrees

0 %

-

31.12.2023

0.6711

ex 8708 80 20

ex 8708 80 35

10

Upper strut insulator containing:

—	a metal holder with three mounting screws, and

—	a rubber bump,

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2025

0.7607

ex 8708 80 99

20

Aluminium suspension link arm, with dimensions of:

—	a height of 50 mm or more but not more than 150 mm,

—	a width of 10 mm or more but not more than 100 mm,

—	a length of 100 mm or more but not more than 600 mm,

—	a mass of 1 000 g or more but not more than 3 000 g,

equipped with at least two bushed holes made of aluminium alloy with the following characteristics:

—	a tensile strength of 200 MPa or more,

—	a strength of 19 kN or more,

—	a stiffness of 5 kN/mm or more but not more than 9 kN/mm,

—	a frequency of 400 Hz or more but not more than 600 Hz

0 %

p/st

31.12.2023

0.7365

ex 8708 80 99

30

Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:

—	with a chrome coating,

—	of a diameter of 11 mm or more, but not more than 28 mm,

—	of a length of 80 mm or more, but not more than 600 mm,

with a threaded end or a mandrel for resistance welding

0 %

-

31.12.2022

0.6509

ex 8708 91 20

ex 8708 91 35

20

10

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.6859

ex 8708 91 20

ex 8708 91 99

30

Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with:

—	an insulating area flatness of not more than 0,1 mm,

—	a permissible particle quantity of 0,3 mg per tank,

—	a distance between pores of 2 mm or more,

—	pore sizes of not more than 0,4 mm, and

—	not more than 3 pores larger than 0,2mm,

—	with a weight of 0,2 kg or more but not more than 3 kg

0 %

p/st

31.12.2025

0.7716

ex 8708 91 35

20

Turbocharger cooling duct containing:

—	an aluminum alloy duct with at least one metal holder and at least two mounting holes,

—	a rubber pipe with clips,

—	a stainless steel flange highly resistant to corrosion [SUS430JIL],

for use in the manufacture of compression ignition engines of motor vehicles (1)

0 %

-

31.12.2024

0.7231

ex 8708 91 99

ex 8708 99 97

40

55

Assembly for supplying compressed air, whether or not with a resonator, comprising at least:

—	one solid aluminium tube whether or not with mounting bracket,

—	one flexible rubber hose, and

—	one metal clip

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2022

0.7665

ex 8708 92 99

10

Exhaust system inner liner:

—	with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

—	made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,

—	whether or not with mounting holes,

for use in the manufacture of exhaust systems for automobiles (1)

0 %

-

31.12.2023

0.7664

ex 8708 92 99

20

Pipe for guiding exhaust gases from the combustion engine:

—	with a diameter of 40 mm or more but not more than 100 mm,

—	with a length of 90 mm or more but not more than 410 mm,

—	with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

—	of stainless steel,

for use in the manufacture of exhaust systems for automobiles (1)

0 %

-

31.12.2023

0.7696

ex 8708 92 99

30

Exhaust system end cover:

—	with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

—	made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,

—	whether or not with inner liner,

—	whether or not with surface treatment,

for use in the manufacture of exhaust systems for automobiles (1)

0 %

-

31.12.2023

0.7849

ex 8708 93 10

ex 8708 93 90

40

Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:

—	cruise control reset,

—	electronic parking brake release,

—	start and stop engine management under Idle Stop and Go system (ISG),

for use in the manufacture of passenger vehicles (1)

0 %

-

31.12.2024

0.6526

ex 8708 94 20

ex 8708 94 35

10

20

Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2024

0.8210

ex 8708 94 20

20

Steel telescopic shaft (steering shaft) for connecting a steering column with rack and pinion steering of a motor vehicle:

—	with a cardan joint on both ends,

—	with a coupling on both ends having internal serration,

—	with a telescopic scope of the shaft of 20 mm or more but not more than 100 mm,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2026

0.6687

ex 8708 95 10

ex 8708 95 99

10

20

Inflatable safety cushion of high strength polyamide fibre:

—

sewn,

—	folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming

0 %

p/st

31.12.2025

0.6688

ex 8708 95 10

ex 8708 95 99

20

30

Inflatable safety cushion of high strength polyamide fibre:

—

sewn,

—

folded,

—	with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,

—	suitable for cool inflator technology

0 %

p/st

31.12.2025

0.7444

ex 8708 99 10

ex 8708 99 97

25

45

Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles (1)

0 %

-

31.12.2023

0.6583

ex 8708 99 10

ex 8708 99 97

60

50

Aluminium engine bracket, with dimensions of:

—	height of more than 10 mm but not more than 200 mm,

—	width of more than 10 mm but not more than 250 mm,

—	length of more than 10 mm but not more than 200 mm,

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

—	internal porosity not more than 1 mm,

—	outer porosity not more than 2 mm,

—	rockwell hardness HRB 10 or more,

of a kind used in the production of suspensions systems for engines in motor vehicles

0 %

p/st

31.12.2024

0.7921

ex 8708 99 97

18

Hydrostatic speed changer:

—	with a hydro pump and a differential with wheel axle,

—	whether or not with a fan impeller and/or a pulley,

for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90 , whose main function is that of a lawn mower (1)

0 %

p/st

31.12.2023

0.8127

ex 8708 99 97

28

A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:

—	cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

—	with an operating pressure of not less than 35 MPa,

—	with a durability declared by the manufacturer of not less than 20 years,

—	with a cylinder capacity of 180 liters or more but not more than 375 liters,

—	equipped with a set of solenoid, manual and safety PRD valves,

—	with a total width of 1 800 mm or more but not more than 2 300 mm,

—	with a total height of 400 mm or more but not more than 500 mm,

—	with a total length of 1 200 mm or more but not more than 3 600 mm

0 %

-

31.12.2025

0.8128

ex 8708 99 97

38

A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:

—	made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

—	with an operating pressure of not less than 20 MPa,

—	with a shelf life declared by the manufacturer of not less than 20 years,

—	with a cylinder capacity of 315 liters or more but not more than 375 liters,

—	equipped with a set of solenoid, manual and safety PRD valves,

—	with a total width of 2 200 mm or more but not more than 2 300 mm,

—	with a total height of 450 mm or more but not more than 460 mm,

—	with a total length of 3 500 mm or more but not more than 3 600 mm

0 %

-

31.12.2025

0.7282

ex 8708 99 97

85

Electroplated interior or exterior parts consisting of:

—	a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,

—	layers of copper, nickel and chromium

for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 (1)

0 %

p/st

31.12.2022

0.6686

ex 8714 10 90

10

Motorcycle fork rod inner tubes:

—	of SAE1541 carbon steel,

—	with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),

—	having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,

—	having an elongation at break of 15 %,

—	perforated

0 %

p/st

31.12.2025

0.6848

ex 8714 10 90

70

Motor bikes radiators in consignment of 100 pieces or more

0 %

p/st

31.12.2022

0.6172

ex 8714 91 30

25

35

72

Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles) (1)

0 %

-

31.12.2023

0.6879

ex 8714 96 10

10

Pedals, for use in the manufacture of bicycles (including electric bicycles) (1)

0 %

-

31.12.2025

0.7421

ex 8714 99 10

20

89

Bicycle handlebars:

—	with or without an integrated stem,

—	either made out of carbon fibres and synthetic resin or made of aluminium,

for use in the manufacture of bicycles (including electric bicycles) (1)

0 %

-

31.12.2022

0.7710

ex 8714 99 50

11

91

Derailleur gears, consisting of:

—	rear derailleur and mounting articles,

—	with or without front derailleur,

for use in the manufacture of bicycles (including electric bicycles) (1)

0 %

-

31.12.2024

0.6878

ex 8714 99 90

30

Seat posts, for use in the manufacture of bicycles (including electric bicycles) (1)

0 %

p/st

31.12.2025

0.7708

ex 8714 99 90

40

Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles) (1)

0 %

-

31.12.2024

0.3191

ex 9001 10 90

10

Image reverser made up from an assembly of optical fibres

0 %

-

31.12.2023

0.5358

ex 9001 10 90

30

Polymer optical fibre with:

—	a poly(methyl methacrylate) core,

—	a cladding of fluorinated polymer,

—	a diameter of not more than 3,0 mm, and

—	a length of more than 150 m,

of a kind used in the manufacture of polymer fibre cables

0 %

-

31.12.2022

0.6402

ex 9001 50 41

ex 9001 50 49

40

Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses (1)

0 %

-

31.12.2022

0.6401

ex 9001 50 80

30

Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses

0 %

-

31.12.2026

0.7590

ex 9002 11 00

18

Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:

—	a horizontal field of view range to a maximum of 120 deg,

—	a diagonal field of view range to a maximum of 105 deg,

—	a focal length to a maximum of 7,50 mm,

—	a relative aperture of a maximum of F/2,90,

—	a maximum diameter of 22 mm

0 %

-

31.12.2023

0.5692

ex 9002 11 00

20

Lenses:

—	measuring not more than 95 mm × 55 mm × 50 mm,

—	with a resolution of 160 lines/mm or better, and

—	with a zoom ratio of 3 or more times

0 %

-

31.12.2022

0.7973

ex 9002 11 00

23

Lenses with:

—	motorized focus, zoom, aperture,

—	electronically switchable infrared cut filter,

—	an adjustable focal length not less than 2,7 mm and not more than 55 mm,

—	a weight of not more than 100 g,

—	a length of less than 70 mm,

—	a diameter of not more than 60 mm

0 %

-

31.12.2025

0.7103

ex 9002 11 00

45

Infrared optical unit

—	with lenses of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (± 0,05 mm),

—	whether or not mounted on a machined aluminium alloy support

of a kind used for thermal cameras or IP network cameras (1)

0 %

-

31.12.2026

0.3177

ex 9002 11 00

50

Lens unit:

—	having a focal length of 25 mm or more but not more than 150 mm,

—	consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm

0 %

-

31.12.2023

0.6572

ex 9002 11 00

85

Lens assembly with:

—	a horizontal field of view range of 20 deg or more, but not more than 200 deg,

—	a focal length of 1,16 mm or more, but not more than 20 mm,

—	a relative aperture of F/1,2 or more, but not more than F/4, and

—	a diameter of 5 mm or more, but not more than 40 mm,

for use in the manufacture of cmOS automotive cameras or in IP network cameras production (1)

0 %

-

31.12.2024

0.3140

ex 9002 90 00

30

Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates

0 %

p/st

31.12.2023

0.5807

ex 9002 90 00

40

Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material

0 %

p/st

31.12.2022

0.5955

ex 9025 80 40

30

Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of

—	a combination of one or more monolithic application-specific integrated circuits (ASIC) and

—	at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

0 %

p/st

31.12.2023

0.6288

ex 9025 80 40

50

Electronic semiconductor sensor for measuring at least two of the following quantities:

—	Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,

—	in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing :

—	one or more monolithic application-specific integrated circuits (ASIC),

—	one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

of a kind used for incorporation into products of Chapters 84-90 and 95

0 %

p/st

31.12.2024

0.3292

ex 9032 89 00

30

Electronic controller of electric power steering (EPS controller)

0 %

p/st

31.12.2023

0.4253

ex 9032 89 00

40

Digital valve controller for controlling liquids and gases

0 %

p/st

31.12.2022

0.7004

ex 9032 89 00

50

Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising

—	an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals

—	four pressure transducers,

—	two or more pressure valves,

—	electric interfaces and

—	several connectors for gas lines

—	suitable for in-situ plasma bonding processes or for multi frequency bond activating processes

0 %

-

31.12.2026

0.5025

ex 9401 99 90

10

Ratchet disk for use in the manufacture of reclining car seats (1)

0 %

p/st

31.12.2025

0.4846

ex 9503 00 75

ex 9503 00 95

10

Plastic cable car scale models, whether or not with a motor, for printing (1)

0 %

p/st

31.12.2025

0.6950

ex 9607 20 10

10

Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers (1)

0 %

-

31.12.2022

0.6949

ex 9607 20 90

10

Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers (1)

0 %

-

31.12.2025

0.3286

ex 9608 91 00

10

Non-fibrous plastic pen-tips with an internal canal

0 %

-

31.12.2023

0.3289

ex 9608 91 00

20

Felt tips and other porous-tips for markers, without internal canal

0 %

-

31.12.2023

0.2737

ex 9612 10 10

10

Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)

0 %

-

31.12.2023

Regulation 2021/2278 - Suspension of the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products - Main contents

1.

Legislative text