Decision 2019/1355 - EU position in the EPA Committee established under the stepping stone Economic Partnership Agreement with Côte d’Ivoire, as regards the adoption of Protocol 1 concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation - Main contents
26.8.2019 |
EN |
Official Journal of the European Union |
L 222/1 |
COUNCIL DECISION (EU) 2019/1355
of 15 July 2019
on the position to be taken on behalf of the European Union in the EPA Committee established under the stepping stone Economic Partnership Agreement between Côte d’Ivoire, of the one part, and the European Community and its Member States, of the other part, as regards the adoption of Protocol 1 concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 207(3) and (4), in conjunction with Article 218(9) thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1) |
The stepping stone Economic Partnership Agreement between Côte d’Ivoire, of the one part, and the European Community and its Member States, of the other part (‘the Agreement’) was signed on behalf of the Union in Abidjan on 26 November 2008 pursuant to Council Decision 2009/156/EC (1) and has been applied on a provisional basis since 3 September 2016. |
(2) |
Pursuant to Article 14 of the Agreement, and in order to benefit from the preferential treatment provided for in the Agreement, the parties to the Agreement are to establish a reciprocal common regime governing the rules of origin, which is to form an integral part of the Agreement by a decision of the EPA Committee. |
(3) |
At its annual meeting in 2019, the EPA Committee is to adopt a decision as regards Protocol 1 concerning the definition of the concept of ‘originating products’ and the methods of administrative cooperation. |
(4) |
Protocol 1 provides for further simplification of the rules of origin and takes into account the most recent developments in order to provide more flexible and simpler rules of origin, with a view to facilitating trade for economic operators and to optimising the use of the preferential treatment provided for in the Agreement. |
(5) |
It is appropriate to establish the position to be taken on behalf of the Union in the 2019 annual meeting of the EPA Committee, as that decision will be binding on the Union. |
(6) |
The position of the Union in the APE Committee should therefore be based on the attached draft decision, |
HAS ADOPTED THIS DECISION:
Article 1
The position to be taken on behalf of the Union in the 2019 annual meeting of the EPA Committee set up by the stepping stone Economic Partnership Agreement between Côte d’Ivoire, of the one part, and the European Community and its Member States, of the other part, as regards the adoption of a decision of the EPA Committee on Protocol 1 to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation, shall be based on the draft decision of the EPA Committee attached to this Decision.
Article 2
The Decision will enter into force on the day of its adoption.
Done at Brussels, 15 July 2019.
For the Council
The President
-
F.MOGHERINI
-
Council Decision 2009/156/EC of 21 November 2008 on the signature and provisional application of the stepping stone Economic Partnership Agreement between Côte d’Ivoire, of the one part, and the European Community and its Member States, of the other part (OJ L 59, 3.3.2009, p. 1).
DRAFT
DECISION No … /2019 OF THE EPA COMMITTEE
established under the stepping stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and its Member States, of the other part
of …
as regards the adoption of Protocol 1 concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation
THE EPA COMMITTEE,
Having regard to the stepping stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and its Member States, of the other part (‘the Agreement’), signed in Abidjan on 26 November 2008 and applied on a provisional basis since 3 September 2016, in particular Articles 14 and 82 thereof,
Whereas:
(1) |
The Agreement applies, on the one hand, to the territories in which the Treaty on the Functioning of the European Union is applicable and under the conditions laid down in that Treaty and, on the other hand, to the territory of Côte d'Ivoire. |
(2) |
In accordance with Article 14(2) of the Agreement, the parties are to establish a reciprocal common regime governing the rules of origin, based on the rules of origin set out in the Cotonou Agreement and providing for their simplification, in view of the Ivorian party's development objectives. This regime will be incorporated into the Agreement by decision of the EPA Committee. |
(3) |
The parties have agreed on Protocol 1 to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation. |
(4) |
In accordance with Article 82 of the Agreement, the Protocol to this Agreement shall form an integral part of the Agreement, |
HAS ADOPTED THIS DECISION:
Article 1
The text of Protocol 1 to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation set out in the Annex to this Decision is hereby adopted.
Article 2
This Decision shall enter into force upon its signature.
Done at …,
For the Republic of Côte d'Ivoire
For the European Union
ANNEX
PROTOCOL 1
CONCERNING THE DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’ AND METHODS OF ADMINISTRATIVE COOPERATION
CONTENTS
TITLE I
GENERAL PROVISIONS
Articles
1. |
Definitions |
TITLE II
DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’
Articles
2. |
General requirements |
3. |
Wholly obtained products |
4. |
Sufficiently worked or processed products |
5. |
Insufficient working or processing operations |
6. |
Working or processing of materials imported into the European Union free of duty |
7. |
Cumulation of origin |
8. |
Cumulation with other countries benefiting from duty-free quota-free access to the market of the European Union |
9. |
Unit of qualification |
10. |
Accessories, spare parts and tools |
11. |
Sets |
12. |
Neutral elements |
13. |
Accounting segregation |
TITLE III
TERRITORIAL REQUIREMENTS
Articles
14. |
Principle of territoriality |
15. |
Non-alteration |
16. |
Exhibitions |
TITLE IV
PROOF OF ORIGIN
Articles
17. |
General requirements |
18. |
Procedure for the issue of a movement certificate EUR.1 |
19. |
Movement certificates EUR.1 issued retrospectively |
20. |
Issue of a duplicate movement certificate EUR.1 |
21. |
Conditions for making out an origin declaration |
22. |
Approved exporter |
23. |
Validity of proof of origin |
24. |
Submission of proof of origin |
25. |
Importation by instalments |
26. |
Exemptions from proof of origin |
27. |
Information procedure for cumulation purposes |
28. |
Supporting documents |
29. |
Preservation of proof of origin and supporting documents |
30. |
Discrepancies and clerical errors |
31. |
Amounts expressed in euro |
TITLE V
ADMINISTRATIVE COOPERATION
Articles
32. |
Administrative conditions for products to benefit from the Agreement |
33. |
Notification of customs authorities |
34. |
Other methods of administrative cooperation |
35. |
Verification of proof of origin |
36. |
Verification of suppliers' declarations |
37. |
Dispute settlement |
38. |
Penalties |
39. |
Free zones |
40. |
Derogations |
TITLE VI
CEUTA AND MELILLA
Articles
41. |
Special conditions |
42. |
Specific conditions |
TITLE VII
FINAL PROVISIONS
Articles
43. |
Revision and application of rules of origin |
44. |
Annexes |
45. |
Implementation of the Protocol |
46. |
Transitional provisions for goods in transit or storage |
ANNEX TO PROTOCOL 1
ANNEX I to Protocol 1: |
Introductory notes to the list in Annex II to the Protocol |
ANNEX II to Protocol 1: |
List of working or processing to be carried out on non-originating materials in order for the product manufactured to acquire originating status |
ANNEX II-A to Protocol 1: |
Derogations from the list of working or processing to be carried out on non-originating materials in order for the product manufactured to acquire originating status |
ANNEX III to Protocol 1: |
Form for movement certificate EUR.1 |
ANNEX IV to Protocol 1: |
Origin declaration |
ANNEX V-A to Protocol 1: |
Supplier declaration for products having preferential origin status |
ANNEX V-B to Protocol 1: |
Supplier declaration for products not having preferential origin status |
ANNEX VI to Protocol 1: |
Information certificate |
ANNEX VII to Protocol 1: |
Form for application for a derogation |
ANNEX VIII to Protocol 1: |
Overseas Countries and Territories |
ANNEX IX to Protocol 1: |
Products referred to in Article 7(4) of the Protocol |
JOINT DECLARATION |
concerning the Principality of Andorra |
JOINT DECLARATION |
concerning the Republic of San Marino |
TITLE I
GENERAL PROVISIONS
Article 1
Definitions
For the purposes of this Protocol:
(a) |
‘manufacture’ means any kind of working or processing including assembly or specific operations; |
(b) |
‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product; |
(c) |
‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation; |
(d) |
‘goods’ means both materials and products; |
(e) |
‘customs value’ means the value as determined in accordance with the Agreement on Implementation of Article VII of the General Agreement on Tariffs and Trade 1994 (WTO Agreement on customs valuation); |
(f) |
‘ex-works price’ means the price paid for the product ex works to the manufacturer in the European Union or in Côte d'Ivoire in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes paid which are, or may be, repaid when the product obtained is exported; |
(g) |
‘value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the European Union or in Côte d'Ivoire; |
(h) |
‘value of originating materials’ means the value of such materials as defined in (g) applied mutatis mutandis; |
(i) |
‘value added’ means the ex-works price of the products minus the customs value of materials imported from third countries into the European Union, the African States, the Carribean and the Pacific (hereafter called the ‘ACP countries’) having applied an Economic Partnership Agreement (EPA) at least on a provisional basis, or OCTs; if the customs value is not known or cannot be ascertained, account shall be taken of the first ascertainable price paid for the materials in the European Union or in Côte d'Ivoire; |
(j) |
‘chapters’ and ‘headings’ mean the chapters and the four-digit headings used in the nomenclature which makes up the Harmonised Commodity Description and Coding System (‘Harmonised System’ or ‘HS’); |
(k) |
‘classified’ refers to the classification of a product or material under a particular heading; |
(l) |
‘consignment’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice; |
(m) |
‘territories’ includes territorial waters; |
(n) |
‘OCT’ means the Overseas Countries and Territories as defined in Annex VIII to this Protocol; |
(o) |
‘Committee’ means the Special Committee on Customs and Trade Facilitation referred to in Article 34 of the stepping stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and its Member States, of the other part, unless otherwise provided for. |
TITLE II
DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’
Article 2
General requirements
1. |
For the purposes of the Agreement, the following products shall be considered as originating in the European Union:
|
2. |
For the purposes of this Agreement, the following products shall be considered as originating in Côte d'Ivoire:
|
Article 3
Wholly obtained products
1. |
The following shall be considered as wholly obtained in Côte d'Ivoire or in the European Union:
|
2. |
The terms ‘their vessels’ and ‘their factory ships’ in points (f) and (g) of paragraph 1 shall apply only to vessels and factory ships:
|
3. |
Notwithstanding paragraph 2 of this Article, further to a request from Côte d'Ivoire, vessels chartered or leased by Côte d'Ivoire to undertake fisheries activities in its exclusive economic zone shall be treated as ‘its vessel’ or ‘its vessels’, provided that an offer was made to the economic operators of the European Union in advance and that the implementing rules laid down in advance by the Committee are complied with. The Committee shall ensure that the conditions laid down in this paragraph are complied with. |
4. |
The conditions referred to in paragraph 2 of this Article may be fulfilled in Côte d'Ivoire and in States belonging to different Economic Partnership Agreements with which cumulation is applicable. In such cases, the products shall be deemed to have the origin of the flag State. |
Article 4
Sufficiently worked or processed products
1. |
For the purposes of Article 2 of this Protocol, products which are not wholly obtained shall be considered to be sufficiently worked or processed when the conditions set out in the list in Annex II to this Protocol are fulfilled. |
2. |
For the purposes of Article 2 of this Protocol, and notwithstanding paragraph 1 of this Article, the products listed in Annex II-A to this Protocol may be considered to be sufficiently worked or processed when the conditions set out in that Annex are fulfilled. Without prejudice to the provisions of Article 43(2) of this Protocol, Annex II-A to this Protocol shall apply only to exports from Côte d'Ivoire, for a period of five (5) years from the date of entry into force of this Protocol. |
3. |
The conditions referred to in paragraphs 1 and 2 of this Article indicate, for all products covered by the Agreement, the working or processing which must be carried out on non-originating materials used in the manufacturing of these products and apply only to such materials. Accordingly, if a product which has acquired originating status by fulfilling the conditions set out in one of the lists for that product is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated shall not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture. |
4. |
By way of derogation from paragraphs 1 and 2 of this Article, non-originating materials which, in accordance with the conditions set out in Annex II and Annex II-A to this Protocol for a given product, should not be used in the manufacture of that product, may nevertheless be used, provided that:
|
5. |
Paragraph 4 of this Article shall not apply to products of Chapters 50 to 63 of the Harmonised System. |
6. |
Paragraphs 1 to 5 of this Article shall apply subject to Article 5 of this Protocol. |
Article 5
Insufficient working or processing operations
1. |
The following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 4 of this Protocol are satisfied:
|
2. |
All operations carried out either in the European Union or in Côte d'Ivoire on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1 of this Article. |
Article 6
Working or processing of materials imported into the European Union free of duty
1. |
Without prejudice to Article 2 of this Protocol, non-originating materials which can be imported into the European Union free of customs duties in application of the conventional tariffs of the most-favoured nation (MFN) system, in accordance with its Common Customs Tariff as defined in Annex I of Council Regulation (EEC) No 2658/87 (1), shall be considered as materials originating in Côte d'Ivoire when incorporated into a product obtained there, provided that they have undergone working or processing there which goes beyond the operations referred to in Article 5(1) of this Protocol. |
2. |
Movement certificates EUR.1 (box 7) or origin declarations issued pursuant to paragraph 1 of this Article shall bear the following entry:
|
3. |
The European Union shall, every year, notify the Committee of the list of materials to which the provisions of this Article apply. Once notification has been given, the list shall be published by the European Commission in the Official Journal of the European Union (C series), and by Côte d'Ivoire in accordance with its own procedures. |
4. |
The cumulation provided for in this Article shall not apply to materials which, on importation into the European Union, are subject to antidumping or countervailing duties when originating from a country which is subject to these antidumping or countervailing duties. |
Article 7
Cumulation of origin
1. |
Without prejudice to Article 2 of this Protocol, materials originating in one of the parties, in other West African countries (2) that benef from duty-free and quota-free access to the market of the European Union, in other ACP States which have applied an EPA at least on a provisional basis, or in OCTs shall be considered as materials originating in the other party when incorporated into a product obtained there, provided that working or processing they have undergone in that party goes beyond the operations referred to in Article 5(1) of this Protocol. Where the working or processing carried out in the party concerned does not go beyond the operations referred to in Article 5(1) of this Protocol, the product obtained shall be considered as originating in that party only if the value added there is greater than the value of the materials used originating in any one of the other countries or territories. If that is not the case, the product obtained shall be considered as originating in the country or territory which accounts for the highest value of originating materials used in the manufacture of the final product. The origin of the materials originating in other ACP States which have applied an EPA at least on a provisional basis and in OCTs shall be determined in accordance with the rules of origin applicable under the preferential agreements between the European Union and those countries and in accordance with Article 28 of this Protocol. |
2. |
Without prejudice to Article 2 of this Protocol, working and processing carried out in one of the parties, in other ACP States which have applied an EPA at least on a provisional basis or in OCTs shall be considered as having been carried out in the other party provided that the materials undergo subsequent working or processing going beyond the operations referred to in Article 5(1) of this Protocol. Where the working or processing carried out in one of the parties does not go beyond the operations referred to in Article 5(1) of this Protocol, the product obtained shall be considered as originating in that party only if the value added there is greater than the value of the materials used in any one of the said countries or territories. If that is not the case, the product obtained shall be considered as originating in the country or territory which accounts for the highest value of materials used in the manufacture of the final product. The origin of the finished product shall be determined in accordance with the rules of origin of this Protocol and the provisions of Article 28 of this Protocol. |
3. |
The cumulation provided for in paragraphs 1 and 2 of this Article may be applied in respect of the other countries of West Africa which have duty-free and quota-free access to the European Union market, of the other ACP States which have applied a EPA at least on a provisional basis and of the OCTs only if:
|
4. |
The cumulation provided for in this Article may only be applied after 1 October 2015 to the products listed in Annex IX of this Protocol, where the materials used in the manufacture of those products are originating or the working or processing takes place in another ACP State which has applied an EPA at least provisionally. |
5. |
The cumulation provided for in this Article shall not apply to:
|
6. |
The European Union shall, every year, notify the Committee of the list of materials to which paragraph 5(c) of this Article applies. Once notification has been given, the list shall be published by the European Commission in the Official Journal of the European Union (C series), and by Côte d'Ivoire in accordance with its own procedures. |
Article 8
Cumulation with other countries benefiting from duty-free quota-free access to the market of the European Union
1. |
Without prejudice to Article 2 of this Protocol, materials originating in countries and territories:
shall be considered as materials originating in Côte d'Ivoire when incorporated into a product obtained there. It shall not be necessary for such materials to have undergone sufficient working or processing, provided they have undergone working or processing beyond that referred to in Article 5(1) of this Protocol. If it also contains non-originating materials, any product to which these materials are incorporated must undergo sufficient working or processing in accordance with Article 4 of this Protocol in order to be considered as originating in Côte d'Ivoire. |
1.2. |
The origin of the materials from the other countries or territories concerned shall be determined in accordance with the rules of origin applicable under the GSP of the European Union and in accordance with Article 27 of this Protocol. |
1.3. |
The cumulation provided for in this paragraph shall not apply to:
|
2. |
Upon notification by Côte d'Ivoire, without prejudice to Article 2 of this Protocol and in accordance with paragraphs 2.1, 2.2 and 5 of this Article, materials originating in countries or territories benefiting from agreements or arrangements providing for duty-free quota-free access to the market of the European Union shall be considered as materials originating in Côte d'Ivoire. The notification shall be transmitted by Côte d'Ivoire to the European Union via the European Commission. Cumulation shall remain applicable until the conditions for granting it are fulfilled. It shall not be necessary for such materials to have undergone sufficient working or processing, provided they have undergone working or processing beyond that referred to in Article 5(1) of this Protocol. |
2.1. |
The origin of the materials of the other countries or territories concerned shall be determined in accordance with the rules of origin applicable under the EU's preferential agreements or arrangements with those countries and territories and in accordance with Article 28 of this Protocol. |
2.2. |
The cumulation provided for in this paragraph shall not apply to:
|
3. |
The European Union shall notify the Committee each year of the list of materials and countries to which paragraph 1 of this Article applies. Once notification has been given, the list shall be published by the European Commission in the Official Journal of the European Union (C series), and by Côte d'Ivoire in accordance with its own procedures. Côte d'Ivoire shall notify the Committee each year of the materials to which the cumulation provided for in paragraphs 1 and 2 of this Article has been applied. |
4. |
Movement certificates EUR.1 (box 7) or origin declarations issued pursuant to paragraphs 1 and 2 of this Article shall bear the following entry:
|
5. |
The cumulation provided for in paragraphs 1 and 2 of this Article may only be applied provided that:
|
Article 9
Unit of qualification
1. |
The unit of qualification for the application of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System. This means that:
|
2. |
Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it must be included for the purposes of determining origin. |
Article 10
Accessories, spare parts and tools
Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as forming a whole with the piece of equipment, machine, apparatus or vehicle in question.
Article 11
Sets
Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.
Article 12
Neutral elements
In order to determine whether a product is originating, it shall not be necessary to determine the origin of the following which might be used in its manufacture:
(a) |
energy and fuel; |
(b) |
plant and equipment; |
(c) |
machines and tools; |
(d) |
goods which do not enter and which are not intended to enter into the final composition of the product. |
Article 13
Accounting segregation
1. |
Where considerable cost or material difficulties arise in keeping separate stocks of originating and non-originating fungible materials, the customs authorities may, on a written request from the interested parties, authorise the ‘accounting segregation’ method (the ‘method’) to be used for managing such stocks. |
2. |
The method shall also apply to raw sugar not containing added flavouring or colouring matter and intended for refining, originating and non-originating, of subheadings 1701 12, 1701 13 and 1701 14 of the Harmonised System, which is physically combined or mixed in Côte d'Ivoire or in the European Union prior to export to the European Union or to Côte d'Ivoire, respectively. |
3. |
The method shall ensure that, at any time, the number of products obtained which could be considered as originating in Côte d'Ivoire or in the EU is the same as that which would have been obtained had there been physical segregation of the stocks. |
4. |
The customs authorities may make the granting of the authorisation referred to in paragraphs 1 and 2 of this Article subject to any conditions deemed appropriate. |
5. |
The method shall be applied and its use shall be recorded on the basis of the general accounting principles applicable in the country where the product was manufactured. |
6. |
The beneficiary of the method may make out or apply for proof of origin, as the case may be, for the quantity of products which may be considered as originating. At the request of the customs authorities, the beneficiary shall provide a statement of how the quantities have been managed. |
7. |
The customs authorities shall monitor the use made of the authorisation and may withdraw it whenever the beneficiary makes improper use of the authorisation in any manner whatsoever or fails to fulfil any of the other conditions laid down in this Protocol. |
8. |
For the purposes of paragraphs 1 and 2 of this Article, ‘fungible materials’ or ‘fungible products’ mean materials or products that are of the same kind and commercial quality, with the same technical and physical characteristics, and which cannot be distinguished from one another for origin purposes. |
TITLE III
TERRITORIAL REQUIREMENTS
Article 14
Principle of territoriality
1. |
The conditions for acquiring originating status set out in Title II of this Protocol shall be fulfilled without interruption in Côte d'Ivoire or in the European Union, subject to Articles 6, 7 and 8 of this Protocol. |
2. |
Except as provided for in Articles 6, 7, and 8, where originating goods exported from Côte d'Ivoire or from the European Union to another country return, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:
|
3. |
The acquisition of originating status in accordance with the conditions set out in Title II of this Protocol shall not be affected by working or processing done outside the European Union or Côte d'Ivoire on products exported from the European Union or from Côte d'Ivoire and subsequently re-imported there, provided that:
|
4. |
For goods meeting the conditions of paragraph 3 of this Article, all costs arising outside Côte d'Ivoire or the European Union, including the value of the materials incorporated there, shall be treated as non-originating materials. The originating status of the goods shall then be determined by applying the rules laid down in Annex II to this Protocol by combining the total value of the non-originating materials used both inside and outside the European Union or Côte d'Ivoire. |
5. |
Paragraphs 3 and 4 of this Article shall not apply to products which can be considered sufficiently worked or processed only if the general tolerance referred to in Article 4(4) of this Protocol is applied. |
6. |
Paragraphs 3 and 4 of this Article shall not apply to products of Chapters 50 to 63 of the Harmonised System. |
Article 15
Non-alteration
1. |
Products declared for release for free circulation in one party shall be the same products as exported from the other party in which they are considered to originate. They shall not have been altered or transformed in any way or subjected to operations other than operations to preserve them in good condition or to add or affix marks, labels, seals or any other documentation to ensure compliance with the national requirements of the importing party, prior to being declared for release for free circulation. |
2. |
Storage of products or consignments may take place when they remain under customs supervision in the country or countries of transit. |
3. |
Without prejudice to Title V, consignments may be split when this is done by the exporter or under the exporter's responsibility, and the products remain under customs supervision in the country or countries of transit. |
4. |
Compliance with paragraphs 1 to 3 shall be assumed unless the customs authorities have reason to believe otherwise; in such cases, the customs authorities may ask the declarant to provide evidence of compliance with those paragraphs, which may be given by any means, including contractual transport documents such as bills of lading or factual evidence based on the marking or numbering of packages or any evidence related to the goods themselves. |
Article 16
Exhibitions
1. |
Originating products sent for exhibition in a country or territory other than those referred to in Articles 6, 7 and 8 of this Protocol with which cumulation is applicable and sold after the exhibition for importation into the European Union or Côte d'Ivoire shall benefit on importation from the provisions of the Agreement, provided that it is shown to the satisfaction of the customs authorities that:
|
2. |
A proof of origin shall be issued or made out in accordance with the provisions of Title IV of this Protocol and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition shall be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required. |
3. |
Paragraph 1 of this Article shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products and during which the products remain under customs control. |
TITLE IV
PROOF OF ORIGIN
Article 17
General requirements
1. |
Products originating in the European Union shall, on importation into Côte d'Ivoire, benefit from the Agreement upon the submission of an origin declaration, in the cases specified in Article 22(1) of this Protocol, given by the exporter on an invoice, delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified (an ‘origin declaration’). The text of the origin declaration appears in Annex IV. |
2. |
Products originating in Côte d'Ivoire shall, on importation into the European Union, benefit from the provisions of this Agreement upon submission of either:
|
3. |
Point (a) of paragraph 2 shall apply for a period of three years from the entry into force of this Protocol. At the expiry of that period, only point (b) of paragraph 2 shall apply. |
4. |
By way of derogation from paragraphs 1 and 2 of this Article, originating products within the meaning of this Protocol shall, in the cases specified in Article 26, benefit from the Agreement without it being necessary to submit any of the documents referred to in paragraphs 1 or 2. |
5. |
For the purposes of applying the provisions of this Title, exporters shall endeavour to use a language shared by Côte d'Ivoire and the European Union. |
Article 18
Procedure for the issue of a movement certificate EUR.1
1. |
A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by the authorised representative of the exporter. |
2. |
For this purpose, the exporter or his authorised representative shall fill in both the movement certificate EUR.1 and the application form, specimens of which appear in Annex III to this Protocol. These forms shall be completed in accordance with the provisions of this Protocol. If they are handwritten, they shall be completed in ink in printed characters. The description of the products must be given in the box reserved for this purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line must be drawn below the last line of the description, the empty space being crossed through. |
3. |
The exporter applying for the issue of a movement certificate EUR.1 shall be prepared to submit at any time, at the request of the customs authorities of the exporting country where the movement certificate EUR.1 is issued, all appropriate documents proving the originating status of the products concerned as well as compliance with the other requirements of this Protocol. |
4. |
A movement certificate EUR.1 shall be issued by the customs authorities of a Member State of the European Union or of Côte d'Ivoire if the products concerned can be considered as products originating in the European Union, in Côte d'Ivoire or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol. |
5. |
The issuing customs authorities shall take any steps necessary to verify the originating status of the products and compliance with the other requirements of this Protocol. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. The issuing customs authorities shall also ensure that the forms referred to in paragraph 2 of this Article are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions. |
6. |
The date of issue of the movement certificate EUR.1 shall be indicated in box 11 of the certificate. |
7. |
A movement certificate EUR.1 shall be issued by the customs authorities and made available to the exporter as soon as actual exportation has been effected or ensured. |
Article 19
Movement certificates EUR.1 issued retrospectively
1. |
Notwithstanding Article 18(7) of this Protocol, a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if:
|
2. |
For the implementation of paragraph 1 of this Article, the exporter must indicate in his application the place and date of exportation of the products to which the movement certificate EUR.1 relates, and state the reasons for his request. |
3. |
The customs authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application complies with that in the corresponding file. |
4. |
Movement certificates EUR.1 issued retrospectively shall be endorsed with the following entry: ‘DÉLIVRÉ A POSTERIORI’. |
5. |
The endorsement referred to in paragraph 4 of this Article shall be inserted in the ‘Remarks’ box of the movement certificate EUR.1. |
Article 20
Issue of a duplicate movement certificate EUR.1
1. |
In the event of theft, loss or destruction of a movement certificate EUR.1, the exporter may apply to the customs authorities which issued it for a duplicate made out on the basis of the export documents in their possession. |
2. |
The duplicate issued in this way shall be endorsed with the following entry: ‘DUPLICATA’ |
3. |
The entry referred to in paragraph 2 of this Article shall be inserted in the ‘Remarks’ box of the duplicate movement certificate EUR.1. |
4. |
The duplicate, which must bear the date of issue of the original movement certificate EUR.1, shall take effect as from that date. |
Article 21
Conditions for making out an origin declaration
1. |
An origin declaration may be made out:
|
2. |
An origin declaration may be made out if the products concerned can be considered as products originating in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol. |
3. |
The exporter making out an origin declaration shall be prepared to submit at any time, at the request of the customs authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as compliance with the other requirements of this Protocol. |
4. |
An origin declaration shall be made out by the exporter by typing, stamping or printing on the invoice, the delivery note or another commercial document, the declaration, the text of which appears in Annex IV to this Protocol, using one of the linguistic versions set out in that Annex and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink in printed characters. |
5. |
Origin declarations shall bear the original signature of the exporter in manuscript. However, a registered exporter as defined in paragraph 1 of this Article, or an approved exporter within the meaning of Article 22 of this Protocol shall not be required to sign such declarations provided that he gives the customs authorities of the exporting country a written undertaking that he accepts full responsibility for any origin declaration which identifies him as if it had been signed in manuscript by him. |
6. |
An origin declaration may be made out by the exporter when the products to which it relates are exported, or after exportation on condition that it is presented in the importing country no longer than two (2) years after the importation of the products to which it relates. |
Article 22
Approved exporter
1. |
The customs authorities of the exporting country may authorise any exporter who makes frequent shipments of products under the trade cooperation provisions of the Agreement to make out origin declarations irrespective of the value of the products concerned. An exporter seeking such authorisation shall offer to the satisfaction of the customs authorities all guarantees necessary to verify the originating status of the products as well as compliance with the other requirements of this Protocol. |
2. |
The customs authorities may grant the status of approved exporter subject to any conditions which they consider appropriate. |
3. |
The customs authorities shall grant to the approved exporter a customs authorisation number which shall appear on the origin declaration. |
4. |
The customs authorities shall monitor the use of the authorisation by the approved exporter. |
5. |
The customs authorities may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, no longer fulfils the conditions referred to in paragraph 2 of this Article or otherwise makes incorrect use of the authorisation. |
Article 23
Validity of proof of origin
1. |
Proof of origin shall be valid for ten (10) months from the date of issue in the exporting country and shall be submitted within that period to the customs authorities of the importing country. |
2. |
Proof of origin submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 of this Article may be accepted for the purpose of applying preferential treatment, where the failure to submit these documents by the final date set is due to exceptional circumstances. |
3. |
In other cases of belated presentation, the customs authorities of the importing country may accept the proof of origin where the products have been submitted before the final date. |
Article 24
Submission of proof of origin
Proof of origin shall be submitted to the customs authorities of the importing country in accordance with the procedures applicable in that country. Those authorities may require proof of origin to be translated. They may also require that the import declaration be accompanied by a statement from the importer to the effect that the products meet the requisite conditions for implementation of the Agreement.
Article 25
Importation by instalments
Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing country, dismantled or non-assembled products within the meaning of General Rule 2(a) of the Harmonised System falling within Sections XVI and XVII or headings 7308 and 9406 of the Harmonised System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities upon importation of the first instalment.
Article 26
Exemptions from proof of origin
1. |
Products sent as small packages from private persons to private persons or forming part of travellers' personal luggage shall be admitted as originating products without requiring the submission of proof of origin, provided that such products are not imported by way of trade and have been declared as meeting the requirements of this Protocol and where there is no doubt as to the veracity of such a declaration. In the case of products sent by post, that declaration can be made on customs declaration CN22/CN23 or on a sheet of paper annexed to that document. |
2. |
Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view. |
3. |
Furthermore, the total value of those products shall not exceed EUR 500 in the case of small packages or EUR 1 200 in the case of products forming part of travellers' personal luggage. |
Article 27
Information procedure for cumulation purposes
1. |
When Article 7(1) of this Protocol is applied, the evidence of originating status within the meaning of this Protocol of the materials from Côte d'Ivoire, from the European Union, from another ACP State having applied an EPA at least on a provisional basis or from an OCT shall be provided by a movement certificate EUR.1, an origin declaration or the supplier's declaration, a specimen of which appears in Annex V-A, given by the exporter in Côte d'Ivoire or in the European Union from which the materials came. |
2. |
When Article 7(1) of this Protocol is applied, the evidence of the working or processing carried out in Côte d'Ivoire, in the European Union, in another ACP State having applied an EPA at least on a provisional basis or in an OCT shall be given by the supplier's declaration, a specimen of which appears in Annex V-B to this Protocol, given by the exporter in Côte d'Ivoire or in the European Union from which the materials came. |
3. |
When Article 8(1) of this Protocol is applied, the supporting documents required to prove origin shall be determined in accordance with the rules applicable to GSP beneficiary countries (4). |
4. |
When Article 8(2) of this Protocol is applied, the supporting documents required to prove origin shall be determined in accordance with the rules laid down in the arrangements or agreements concerned. |
5. |
A separate supplier's declaration shall be made out by the supplier for each consignment of goods on the commercial invoice related to that consignment or in an annex to that invoice, or on a delivery note or any other commercial document related to that consignment which describes the materials concerned in sufficient detail to enable them to be identified. |
6. |
The supplier's declaration may be made out on a pre-printed form. |
7. |
The suppliers' declarations shall bear the original signature of the supplier in manuscript. However, where the invoice and the supplier's declaration are established using electronic data processing methods, the supplier's declaration need not be signed in manuscript provided the responsible official in the supplying company is identified to the satisfaction of the customs authorities in the State in which the supplier's declaration is drawn up. Those customs authorities may lay down conditions for the implementation of this paragraph. |
8. |
The supplier's declarations shall be submitted to the customs authorities in the exporting country that has been requested to issue the movement certificate EUR.1. |
9. |
The supplier making out a declaration must be prepared to submit at any time, at the request of the customs authorities of the country where the declaration is made out, all appropriate documents proving that the information given on this declaration is correct. |
10. |
Suppliers' declarations made and information certificates issued before the date of entry into force of this Protocol in accordance with Article 26 of Protocol 1 to the Cotonou Agreement shall remain valid. |
Article 28
Supporting documents
The documents referred to in Articles 18(3) and 21(3) of this Protocol used for the purpose of proving that products covered by a movement certificate EUR.1 or an origin declaration can be considered as products originating in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol may consist inter alia of the following:
(a) |
direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained for example in his accounts or internal bookkeeping; |
(b) |
documents proving the originating status of materials used, issued or made out in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol where these documents are used in accordance with domestic law; |
(c) |
documents proving the working or processing of materials in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol, issued or made out in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 where these documents are used in accordance with domestic law; |
(d) |
movement certificates EUR.1 or origin declarations proving the originating status of materials used, issued or made out in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol, and in accordance with this Protocol. |
Article 29
Preservation of proof of origin and supporting documents
1. |
The exporter applying for the issue of a movement certificate EUR.1 shall keep the documents referred to in Article 18(3) of this Protocol for at least three (3) years. |
2. |
Exporters making out an origin declaration shall keep a copy of that origin declaration as well as the documents referred to in Article 21(3) of this Protocol for at least three (3) years. |
3. |
Suppliers making out an origin declaration shall keep copies of the declaration and of the invoice, delivery notes or other commercial documents to which this declaration is annexed, as well as the documents referred to in Article 27(9) of this Protocol, for at least three (3) years. |
4. |
The customs authorities of the exporting country issuing a movement certificate EUR.1 shall keep the application form referred to in Article 18(2) of this Protocol for at least three (3) years. |
5. |
The customs authorities of the importing country shall keep the movement certificates EUR.1 and the origin declarations submitted to them for at least three (3) years. |
Article 30
Discrepancies and clerical errors
1. |
The discovery of slight discrepancies between the entries made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that this document does correspond to the products submitted. |
2. |
Obvious clerical errors such as typing errors on a proof of origin should not cause this document to be rejected if these errors are not such as to create doubts concerning the accuracy of the entries made in this document. |
Article 31
Amounts expressed in euro
1. |
|
2. |
A consignment shall benefit from the provisions of Article 22(1)(b) or Article 27(3) of this Protocol by reference to the currency in which the invoice is drawn up, according to the amount fixed by the country concerned. |
3. |
The amounts to be used in any given national currency shall be the equivalent in that currency of the amounts expressed in euro as at the first working day of October. The amounts shall be communicated to the European Commission by 15 October at the latest and shall apply from 1 January the following year. The European Commission shall notify all countries concerned of the relevant amounts. |
4. |
A country may round up or down the amount resulting from the conversion into its national currency of an amount expressed in euro. The rounded-off amount may not differ from the amount resulting from the conversion by more than 5 %. A country may retain unchanged its national currency equivalent of an amount expressed in euro if, at the time of the annual adjustment provided for in paragraph 3 of this Article, the conversion of that amount, prior to any rounding-off, results in an increase of less than 15 % in the national currency equivalent. The national currency equivalent may be retained unchanged if the conversion would result in a decrease in that equivalent value. |
5. |
The amounts expressed in euro shall be reviewed by the Committee at the request of the European Union or of Côte d'Ivoire. When carrying out this review, the Committee shall consider the desirability of preserving the effects of the limits concerned in real terms. For this purpose, it may decide to modify the amounts expressed in euro. |
TITLE V
ADMINISTRATIVE COOPERATION
Article 32
Administrative conditions for products to benefit from the Agreement
Products originating, within the meaning of this Protocol, in Côte d'Ivoire or in the European Union shall benefit, at the time of the customs import declaration, from the preferences resulting from the Agreement only on condition that they were exported on or after the date on which the exporting country complies with Articles 33, 34 and 45 of this Protocol.
The Contracting Parties shall convey the information referred to in Article 33 of this Protocol.
Article 33
Notification of customs authorities
1. |
Côte d'Ivoire and the Member States of the European shall provide each other, via the European Commission and the ECOWAS Commission, with the addresses of the customs authorities competent to issue and verify movement certificates EUR.1, origin declarations and supplier's declarations, and with specimens of the stamps used in the customs offices for the issue of those certificates. Movement certificates EUR.1 and origin declarations or supplier's declarations shall be accepted for the purpose of applying preferential treatment from the date the information is received by the European Commission and the ECOWAS Commission. |
2. |
Côte d'Ivoire and the Member States of the European Union shall immediately inform each other of any change in the information referred to in paragraph 1 of this Article. |
3. |
The authorities referred to in paragraph 1 of this Article shall act under the authority of the government of the country concerned. The authorities in charge of control and verification shall be part of the governmental authorities of the country concerned. |
Article 34
Other methods of administrative cooperation
1. |
In order to ensure the proper application of this Protocol, the European Union, Côte d'Ivoire and the other countries referred to in Articles 6, 7 and 8 of this Protocol shall ensure, through their competent customs authorities, that the authenticity of the movement certificates EUR.1, the origin declarations or the supplier's declarations and the accuracy of the information given in these documents are checked. Côte d'Ivoire and the Member States of the European Union shall also:
|
2. |
The authorities consulted shall furnish the relevant information concerning the conditions under which the product has been made, indicating in particular the conditions under which the rules of origin have been complied with in Côte d'Ivoire, in the European Union and in the other countries referred to in Articles 6, 7 and 8 of this Protocol. |
Article 35
Verification of proof of origin
1. |
Subsequent verifications of proof of origin shall be carried out on the basis of a risk analysis, by random sampling or whenever the customs authorities of the importing country have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or compliance with the other requirements of this Protocol. |
2. |
For the purposes of implementing paragraph 1 of this Article, the customs authorities of the importing country shall return the movement certificate EUR.1 and the invoice, if it has been submitted, the origin declaration, or a copy of these documents, to the customs authorities of the exporting country giving, where appropriate, the reasons for the request for verification. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification. |
3. |
The verification shall be carried out by the customs authorities of the exporting country. For that purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. |
4. |
If the customs authorities of the importing country decide to suspend the granting of preferential treatment to the products concerned while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures deemed necessary. |
5. |
The customs authorities requesting the verification shall be informed of the results thereof as soon as possible. Those results must indicate clearly whether the documents are authentic and whether the products concerned can be considered as products originating in Côte d'Ivoire, in the European Union or in one of the other countries referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol. |
6. |
If in cases of reasonable doubt there is no reply within ten (10) months of the date of the verification request or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, the requesting customs authorities shall, except in exceptional circumstances, refuse entitlement to the preferences. |
7. |
The parties shall refer to Article 7 of Protocol 2 to the Agreement on mutual administrative assistance in customs matters for joint investigations concerning proof of origin. |
Article 36
Verification of suppliers' declarations
1. |
Verification of suppliers' declarations shall be carried out on the basis of risk analysis, by random sampling or whenever the customs authorities of the country where such declarations have been taken into account to issue a movement certificate EUR.1 or to make out an origin declaration have reasonable doubts as to the authenticity of the document or the accuracy of the information given in this document. |
2. |
The customs authorities to which a supplier's declaration is submitted may request the customs authorities of the State where the declaration was made out to issue an information certificate, a specimen of which appears in Annex VI to this Protocol. Alternatively, the certifying authorities to which a supplier's declaration is submitted may request that the exporter produce an information certificate issued by the customs authorities of the State where the declaration was made out. A copy of the information certificate shall be preserved by the office which has issued it for at least three (3) years. |
3. |
The customs authorities requesting the verification shall be informed of the results thereof as soon as possible. The results must indicate clearly whether the information given in the supplier's declaration is correct and make it possible for them to determine whether and to what extent this supplier's declaration could be taken into account for issuing a movement certificate EUR.1 or for making out an origin declaration. |
4. |
The verification shall be carried out by the customs authorities of the country where the supplier's declaration was made out. For this purpose, they shall have the right to call for any evidence or to carry out any inspection of the supplier's account or any other check which they consider appropriate in order to verify the accuracy of the supplier's declaration. |
5. |
Any movement certificate EUR.1 or origin declaration issued or made out on the basis of an inaccurate supplier's declaration shall be considered null and void. |
Article 37
Dispute settlement
1. |
Where disputes arise in relation to the verification procedures of Articles 35 and 36 of this Protocol which cannot be settled between the customs authorities requesting a verification and the customs authorities responsible for carrying out this verification or where they raise a question of interpretation of this Protocol, they shall be submitted to the Committee. |
2. |
In all cases the settlement of disputes between the importer and the customs authorities of the importing country shall take place under the legislation of that country. |
Article 38
Penalties
Penalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains inaccurate information for the purpose of obtaining preferential treatment for products.
Article 39
Free zones
1. |
Côte d'Ivoire and the European Union shall take all necessary steps to ensure that products traded under cover of a proof of origin or a supplier's declaration and which in the course of transport use a free zone situated in their territory, are not substituted by other goods and do not undergo handling other than normal operations designed to prevent their deterioration. |
2. |
By way of derogation from paragraph 1 of this Article, when products originating in Côte d'Ivoire or in the European Union are imported into a free zone under cover of a proof of origin and undergo treatment or processing, the authorities concerned shall issue a new movement certificate EUR.1 at the exporter's request if the treatment or processing undergone complies with the provisions of this Protocol. |
Article 40
Derogations
1. |
Derogations from this Protocol may be adopted by the Committee where the development of existing industries or the creation of new industries in Côte d'Ivoire justifies them. To that end, Côte d'Ivoire shall, before or when it submits the matter to the Committee, notify the European Union of its request together with the reasons for the request in accordance with paragraph 2 of this Article. The European Union shall respond positively to all requests by Côte d'Ivoire which are duly justified in accordance with this Article and which cannot cause serious injury to an established EU industry. |
2. |
In order to facilitate the examination by the Committee of requests for derogation, Côte d'Ivoire shall, by means of the form set out in Annex VII to this Protocol, furnish in support of its request the fullest possible information covering in particular the points listed below:
The same rules shall apply to any requests for extension. The Committee may modify the form. |
3. |
The examination of requests shall in particular take into account:
|
4. |
In all cases, an examination shall be carried out to ascertain whether the rules relating to cumulation of origin do not provide a solution to the problem. |
5. |
In the examination of requests, special account shall be taken, on a case-by-case basis, of the possibility of conferring originating status on products which include in their composition materials originating in neighbouring developing countries, least-developed countries or developing countries with which Côte d'Ivoire has special relations, provided that administrative cooperation can be established. |
6. |
The Committee shall take all the necessary steps to ensure that a decision is reached as soon as possible and in any case not later than seventy five (75) working days after the request is received by the EU Co-Chair of the Committee. If the European Union does not inform Côte d'Ivoire of its position on the request within this period, the request shall be deemed to have been accepted. |
7. |
|
8. |
Notwithstanding paragraphs 1 to 7 of this Article, the automatic derogations for canned tuna and tuna loins of HS heading 1604 shall be granted only for a period of two (2) years from the date of entry into force of this Protocol, within the limits of an annual degressive quota of 2 000 tonnes in the first year and 1 000 in the second year for canned products and an annual quota of 200 tonnes for tuna loins. |
TITLE VI
CEUTA AND MELILLA
Article 41
Special conditions
1. |
The term ‘European Union’ used in this Protocol shall not cover Ceuta and Melilla. |
2. |
Products originating in Côte d'Ivoire, when imported into Ceuta or Melilla, shall enjoy in all respects the same customs regime as that which is applied to products originating in the customs territory of the European Union under Protocol 2 of the Act of Accession of the Kingdom of Spain and the Portuguese Republic to the European Communities. Côte d'Ivoire shall grant to imports of products covered by this Agreement and originating in Ceuta and Melilla the same customs regime as that which is granted to products imported from and originating in the European Union. |
3. |
For the purpose of applying paragraph 2 of this Article concerning products originating in Ceuta and Melilla, this Protocol shall apply mutatis mutandis subject to the specific conditions set out in Article 42 of this Protocol. |
Article 42
Specific conditions
1. |
Provided that they have been transported in accordance with Article 15 of this Protocol, the following shall be considered as:
|
2. |
Ceuta and Melilla shall be considered as a single territory. |
3. |
The exporter or its authorised representative shall enter ‘....’ and ‘Ceuta and Melilla’ in box 2 of movement certificates EUR.1 or on origin declarations. In addition, in the case of products originating in Ceuta and Melilla, originating status shall be indicated in box 4 of movement certificates EUR.1 or on origin declarations. |
4. |
The Spanish customs authorities shall be responsible for the application of this Protocol in Ceuta and Melilla. |
TITLE VII
FINAL PROVISIONS
Article 43
Revision and application of rules of origin
1. |
In accordance with Article 73 of the Agreement, the EPA Committee may, each time Côte d'Ivoire or the European Union so requests, examine the application of the provisions of this Protocol and their economic effects with a view to making any necessary adjustments or amendments. The EPA Committee shall take into account, among other elements, the impact of technological developments on the rules of origin. |
2. |
Notwithstanding paragraph 1 of this Article, this Protocol and the Annexes thereto shall be reviewed and, if necessary, revised before the end of a period of five (5) years from the date of entry into force of this Protocol, in accordance with the obligations of Article 14 of the Agreement. This review shall also cover Annex II-A to this Protocol in order to establish whether or not to renew it. |
3. |
In accordance with Article 34 of the Agreement, the Committee shall monitor the implementation and management of this Protocol and take decisions concerning, inter alia:
|
Article 44
Annexes
The Annexes to this Protocol shall form an integral part of this Protocol.
Article 45
Implementation of the Protocol
The European Union and Côte d'Ivoire shall, each on its own behalf, take the measures necessary for the implementation of this Protocol, including:
(a) |
the national and regional arrangements required for the implementation and enforcement of the rules and procedures laid down in this Protocol, in particular the arrangements necessary for the application of the articles on cumulation; |
(b) |
the establishment of the administrative structures and systems necessary for the appropriate management and verification of the origin of products. |
Article 46
Transitional provisions for goods in transit or storage
The provisions of the Agreement may be applied to goods which comply with the provisions of this Protocol and which on the date of entry into force of this Protocol are either in transit or are in the European Union or in Côte d'Ivoire in temporary storage, in customs warehouses or in free zones, subject to the submission to the customs authorities of the importing country, within ten (10) months of that date, of a movement certificate EUR.1 made out retrospectively by the customs authorities of the exporting country together with the evidence of compliance with Article 15 of this Protocol.
-
Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ EC L 256, 7.9.1987, p. 1), including all subsequent amendments.
-
The other West African countries are: Benin, Burkina Faso, Cape Verde, Gambia, Ghana, Guinea, Guinea-Bissau, Liberia, Mali, Mauritania, Niger, Nigeria, Senegal, Sierra Leone and Togo.
-
See Council Decision 2009/729/EC of 13 July 2009 on the signature and provisional application of the Interim Partnership Agreement between the European Community, of the one part, and the Pacific States, of the other part (OJ EU L 272, 16.10.2009, p. 1).
-
See Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ EC L 253, 11.10.1993, p. 1).
ANNEX I TO PROTOCOL 1
INTRODUCTORY NOTES TO THE LIST IN ANNEX II TO THE PROTOCOL
Note 1:
The list in Annex II to this Protocol sets out, for all products, the requisite conditions for the products to be considered as sufficiently worked or processed within the meaning of Article 4 of the Protocol.
Note 2:
1. |
The first two columns in the list describe the product obtained. The first column gives the heading number or chapter number used in the Harmonised System and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns, a rule is specified in columns 3 or 4. Where, in some cases, the entry in the first column is preceded by an ‘ex’, this signifies that the rules in columns 3 or 4 apply only to the part of that heading as described in column 2. |
2. |
Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in column 3 or 4 apply to all products which, under the Harmonised System, are classified in headings of the chapter or in any of the headings grouped together in column 1. |
3. |
Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in columns 3 or 4. |
4. |
Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 has to be applied. |
Note 3:
1. |
The provisions of Article 4 of this Protocol, concerning products having acquired originating status which are used in the manufacture of other products, apply regardless of whether this status has been acquired inside the factory where these products are used or in another factory in the European Union or in Côte d'Ivoire. For example: An engine of heading 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 % of the ex-works price, is made from ‘other alloy steel roughly shaped by forging’ of heading ex 7224. If that forging has been forged in the European Union from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading ex 7224 in the list. The forging can then count as originating in the value calculation for the engine, regardless of whether it was produced in the same factory or in another factory in the European Union. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used. |
2. |
The rule in the list represents the minimum amount of working or processing required, and the carrying out of more working or processing also confers originating status; conversely, the carrying out of less working or processing cannot confer originating status. In other words, if a rule provides that non-originating material, at a certain level of manufacture, may be used, the use of such material at an earlier stage of manufacture is allowed, and the use of such material at a later stage is not. |
3. |
Without prejudice to Note 3.2, where a rule states that ‘materials of any heading’ may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression ‘manufacture from materials of any heading, including other materials of heading …’ means that only materials classified in the same heading as the product of a description other than that of the product as given in column 2 of the list may be used. |
4. |
When a rule in the list specifies that a product may be manufactured from more than one material, this means that one or more materials may be used. It does not require that all be used. For example: The rule for fabrics of headings 5208 to 5212 indicates that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other or both. |
5. |
Where a rule in the list specifies that a product must be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule (see also Note 6.3 below in relation to textiles). For example: The rule for prepared foods of heading 1904, which specifically excludes the use of cereals and their derivatives, does not prevent the use of mineral salts, chemicals and other additives which are not produced from cereals. However, this does not apply to products which, although they cannot be manufactured from the particular materials specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture. For example: In the case of an article of apparel of ex Chapter 62 of the Harmonised System made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth – even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn – that is the fibre stage. |
6. |
Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then those percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the higher of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials to which they apply. |
Note 4:
1. |
The term ‘natural fibres’ is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres which have been carded, combed or otherwise processed, but not spun. |
2. |
The term ‘natural fibres’ includes horsehair of heading 0511, silk of headings 5002 and 5003 as well as wool fibres and fine or coarse animal hair of headings 5101 to 5105, cotton fibres of headings 5201 to 5203 and other vegetable fibres of headings 5301 to 5305. |
3. |
The terms ‘textile pulp’, ‘chemical materials’ and ‘paper-making materials’ are used in the list to describe the materials not classified in Chapters 50 to 63 of the Harmonised System which can be used to manufacture artificial, synthetic or paper fibres or yarns. |
4. |
The term ‘man-made staple fibres’ is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of headings 5501 to 5507. |
Note 5:
1. |
Where, for a given product in the list, reference is made to this Note, the conditions set out in column 3 shall not be applied to any basic textile materials used in the manufacture of this product, which, taken together, represent 10 % or less of the total weight of all the basic textile materials used (see also Notes 5.3 and 5.4 below.) |
2. |
However, the tolerance mentioned in Note 5.1 may only be applied to mixed products which have been made from two or more basic textile materials. The following are the basic textile materials:
For example: A yarn of heading 5205 made from cotton fibres of heading 5203 and synthetic staple fibres of heading 5506 is a mixed yarn. Therefore, non-originating synthetic staple fibres that do not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) may be used up to a weight of 10 % of the yarn. For example: A woollen fabric of heading 5112 made from woollen yarn of heading 5107 and synthetic yarn of staple fibres of heading 5509 is a mixed fabric. Therefore, synthetic yarn which does not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) or woollen yarn which does not satisfy the origin rules (which require manufacture from natural fibres, not carded or combed or otherwise prepared for spinning) or a combination of the two may be used, provided that their total weight does not exceed 10 % of the weight of the fabric. For example: Tufted textile fabric of heading 5802 made from cotton yarn of heading 5205 and cotton fabric of heading 5210 is only a mixed product if the cotton fabric is itself a mixed fabric made from yarns classified in two separate headings or if the cotton yarns used are themselves mixtures. For example: If the tufted textile fabric concerned had been made from cotton yarn of heading 5205 and synthetic fabric of heading 5407, then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is, accordingly, a mixed product. |
3. |
In the case of products incorporating ‘yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped’, the tolerance is 20 % in respect of this yarn. |
4. |
In the case of products incorporating ‘strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of an adhesive between two layers of plastic film’, the tolerance is 30 % in respect of the strip. |
Note 6:
1. |
In the case of those textile products which are marked in the list by a footnote referring to this Introductory Note, textile trimmings and accessories which do not satisfy the rule set out in the list in column 3 for the made up products concerned may be used provided that their weight does not exceed 10 % of the total weight of all the textile materials incorporated. The textile trimmings and accessories concerned are those classified in Chapters 50 to 63 of the Harmonised System. Linings and interlinings are not be regarded as trimmings or accessories. |
2. |
Any non-textile trimmings and accessories or other materials used which contain textiles do not have to satisfy the conditions set out in column 3 even though they fall outside the scope of Note 3.5. |
3. |
In accordance with Note 3.5, any non-originating non-textile trimmings and accessories or other product which do not contain any textiles may, in all cases, be used freely where they cannot be made from the materials listed in column 3. For example (1), if a rule in the list says that for a particular textile item, such as a blouse, yarn must be used, this does not prevent the use of metal items, such as buttons, because they cannot be made from textile materials. |
4. |
Where a percentage rule applies, the value of trimmings and accessories must be taken into account when calculating the value of the non-originating materials incorporated. |
Note 7:
1. |
For the purposes of headings ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, the ‘specific processes’ are as follows:
|
2. |
For the purposes of headings 2710 to 2712, the ‘specific processes’ are as follows:
|
3. |
For the purposes of headings ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, simple operations such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, any combination of these operations or like operations do not confer origin. |
-
This example is given for explanatory purposes only. It is not legally binding.
-
See Additional Explanatory Note 5(b) to Chapter 27 of the Combined Nomenclature.
-
See Additional Explanatory Note 5(b) to Chapter 27 of the Combined Nomenclature.
ANNEX II TO PROTOCOL 1
LIST OF WORKING OR PROCESSING TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO ACQUIRE ORIGINATING STATUS
The products mentioned in the list below may not all be covered by the Agreement. It is, therefore, necessary to consult the other parts of the Agreement.
HS heading (1) |
Product description (2) |
Working or processing carried out on non-originating materials that confers originating status
|
|||||||||||||
Chapter 1 |
Live animals |
All the animals of Chapter 1 used must be wholly obtained |
|||||||||||||
Chapter 2 |
Meat and edible meat offal |
Manufacture in which all the materials of Chapters 1 and 2 used must be wholly obtained |
|||||||||||||
ex Chapter 3 |
Fish and crustaceans, molluscs and other aquatic invertebrates |
Manufacture in which all the materials of Chapter 3 used must be wholly obtained |
|||||||||||||
0304 |
Fish fillets and other fish meat (whether or not minced), fresh, chilled or frozen |
Manufacture in which the value of all the materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product |
|||||||||||||
0305 |
Fish, dried, salted or in brine; smoked fish, whether or not cooked before or during the smoking process; flours, meals and pellets of fish, fit for human consumption |
Manufacture in which the value of all the materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product |
|||||||||||||
0306 |
Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked crustaceans, whether in shell or not, whether or not cooked before or during the smoking process; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine; flours, meals and pellets of crustaceans, fit for human consumption |
Manufacture in which the value of all the materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product |
|||||||||||||
0307 |
Molluscs, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked molluscs, whether in shell or not, whether or not cooked before or during the smoking process; flours, meals and pellets of molluscs, fit for human consumption |
Manufacture in which the value of all the materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product |
|||||||||||||
0308 |
Aquatic invertebrates other than crustaceans and molluscs, live, fresh, chilled, frozen, dried, salted or in brine; smoked aquatic invertebrates other than crustaceans and molluscs, whether or not cooked before or during the smoking process; flours, meals and pellets of aquatic invertebrates other than crustaceans and molluscs, fit for human consumption |
Manufacture in which the value of all the materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product |
|||||||||||||
ex Chapter 4 |
Dairy produce; birds' eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for: |
Manufacture in which all the materials of Chapter 4 used must be wholly obtained |
|||||||||||||
0403 |
Buttermilk, curdled milk and cream, yoghurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa |
Manufacture in which:
|
|||||||||||||
ex Chapter 5 |
Products of animal origin, not elsewhere specified or included; except for: |
Manufacture in which all the materials of Chapter 5 used must be wholly obtained |
|||||||||||||
ex 0502 |
Prepared pigs', hogs' or boars' bristles and hair |
Cleaning, disinfecting, sorting and straightening of bristles and hair |
|||||||||||||
Chapter 6 |
Live trees and other plants |
Manufacture in which:
|
|||||||||||||
Chapter 7 |
Edible vegetables and certain roots and tubers |
Manufacture in which all the materials of Chapter 7 used must be wholly obtained |
|||||||||||||
Chapter 8 |
Edible fruit and nuts; peel of citrus fruits or melons |
Manufacture in which:
|
|||||||||||||
ex Chapter 9 |
Coffee, tea, maté and spices; except for: |
Manufacture in which all the materials of Chapter 9 used must be wholly obtained |
|||||||||||||
0901 |
Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportion |
Manufacture from materials of any heading |
|||||||||||||
0902 |
Tea, whether or not flavoured |
Manufacture from materials of any heading |
|||||||||||||
ex 0910 |
Mixtures of spices |
Manufacture from materials of any heading |
|||||||||||||
Chapter 10 |
Cereals |
Manufacture in which all the materials of Chapter 10 used must be wholly obtained |
|||||||||||||
ex Chapter 11 |
Products of the milling industry; malt; starches; inulin; wheat gluten; except for: |
Manufacture in which all the cereals, edible vegetables, roots and tubers of heading 0714 or fruit used must be wholly obtained |
|||||||||||||
ex 1106 |
Flour, meal and powder of the dried, shelled leguminous vegetables of heading 0713 |
Drying and milling of leguminous vegetables of heading 0708 |
|||||||||||||
Chapter 12 |
Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder |
Manufacture in which all the materials of Chapter 12 used must be wholly obtained |
|||||||||||||
1301 |
Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams) |
Manufacture in which the value of any materials of heading 1301 used may not exceed 50 % of the ex-works price of the product |
|||||||||||||
1302 |
Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products: |
||||||||||||||
mucilages and thickeners, modified, derived from vegetable products |
Manufacture from non-modified mucilages and thickeners |
||||||||||||||
other |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
Chapter 14 |
Vegetable plaiting materials; vegetable products not elsewhere specified or included |
Manufacture in which all the materials of Chapter 14 used must be wholly obtained |
|||||||||||||
ex Chapter 15 |
Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animals or vegetable waxes; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
1501 |
Pig fat (including lard) and poultry fat, other than that of heading 0209 or 1503 : |
||||||||||||||
fats from bones or waste |
Manufacture from materials of any heading, except those of heading 0203 , 0206 or 0207 or bones of heading 0506 |
||||||||||||||
other |
Manufacture from meat or edible offal of swine of heading 0203 or 0206 or of meat and edible offal of poultry of heading 0207 |
||||||||||||||
1502 |
Fats of bovine animals, sheep or goats, other than those of heading 1503 : |
||||||||||||||
fats from bones or waste |
Manufacture from materials of any heading, except those of heading 0201 , 0202 , 0204 or 0206 or bones of heading 0506 |
||||||||||||||
other |
Manufacture in which all the materials of Chapter 2 used must be wholly obtained |
||||||||||||||
1504 |
Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified: |
||||||||||||||
solid fractions |
Manufacture from materials of any heading, including other materials of heading 1504 |
||||||||||||||
other |
Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained |
||||||||||||||
ex 1505 |
Refined lanolin |
Manufacture from crude wool grease of heading 1505 |
|||||||||||||
1506 |
Other animals fats and oils and their fractions, whether or not refined, but not chemically modified: |
||||||||||||||
solid fractions |
Manufacture from materials of any heading, including other materials of heading 1506 |
||||||||||||||
other |
Manufacture in which all the materials of Chapter 2 used must be wholly obtained |
||||||||||||||
1507 to 1515 |
Vegetable oils and their fractions:
|
Manufacture in which all the materials used are classified within a heading other than that of the product Manufacture from other materials of headings 1507 to 1515 Manufacture in which all the vegetable materials used must be wholly obtained |
|||||||||||||
1516 |
Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared |
Manufacture in which:
|
|||||||||||||
1517 |
Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516 |
Manufacture in which:
|
|||||||||||||
Chapter 16 |
Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates |
Manufacture from animals of Chapter 1 |
|||||||||||||
1604 and 1605 |
Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs; Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved |
Manufacture in which the value of all the materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product |
|||||||||||||
ex Chapter 17 |
Sugars and sugar confectionery; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 1701 |
Cane or beet sugar and chemically pure sucrose, in solid form, flavoured or coloured |
Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product |
|||||||||||||
1702 |
Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel: |
||||||||||||||
chemically pure maltose and fructose |
Manufacture from materials of any heading, including other materials of heading 1702 |
||||||||||||||
other sugars in solid form, flavoured or coloured |
Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product |
||||||||||||||
other |
Manufacture in which all the materials used must already be originating |
||||||||||||||
ex 1703 |
Molasses resulting from the extraction or refining of sugar, flavoured or coloured |
Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product |
|||||||||||||
1704 |
Sugar confectionery (including white chocolate), not containing cocoa |
Manufacture in which:
|
|||||||||||||
Chapter 18 |
Cocoa and cocoa preparations |
Manufacture in which:
|
|||||||||||||
1901 |
Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included: |
||||||||||||||
malt extract |
Manufacture from cereals of Chapter 10 |
||||||||||||||
other |
Manufacture in which:
|
||||||||||||||
1902 |
Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared: |
||||||||||||||
containing 20 % or less by weight of meat, meat offal, fish, crustaceans or molluscs |
Manufacture in which all the cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained |
||||||||||||||
containing more than 20 % by weight of meat, meat offal, fish, crustaceans or molluscs |
Manufacture in which:
|
||||||||||||||
1903 |
Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or in similar forms |
Manufacture from materials of any heading, except potato starch of heading 1108 |
|||||||||||||
1904 |
Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals other than maize (corn) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked, or otherwise prepared, not elsewhere specified or included |
Manufacture:
|
|||||||||||||
1905 |
Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
Manufacture from materials of any heading except those of Chapter 11 |
|||||||||||||
ex Chapter 20 |
Preparations of vegetables, fruit, nuts or other parts of plants; except for: |
Manufacture in which all the fruit, nuts or vegetables used must be wholly obtained |
|||||||||||||
ex 2001 |
Yams, sweet potatoes and similar edible parts of plants containing 5 % or more by weight of starch, prepared or preserved by vinegar or acetic acid |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 2004 and ex 2005 |
Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
2006 |
Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallised) |
Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product |
|||||||||||||
2007 |
Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, being cooked preparations, whether or not containing added sugar or other sweetening matter |
Manufacture in which:
|
|||||||||||||
ex 2008 |
Nuts, not containing added sugar or spirit |
Manufacture in which the value of the originating nuts and oil seeds of headings 0801 , 0802 and 1202 to 1207 used exceeds 60 % of the ex-works price of the product |
|||||||||||||
Peanut butter; mixtures based on cereals; palm hearts; maize (corn) |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||||
Other except for fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen |
Manufacture in which:
|
||||||||||||||
2009 |
Fruit juices (including grape must) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter |
Manufacture in which:
|
|||||||||||||
ex Chapter 21 |
Miscellaneous edible preparations; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
2101 |
Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof |
Manufacture in which:
|
|||||||||||||
2103 |
Sauces and preparations therefor; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard: |
||||||||||||||
sauces and preparations therefor; mixed condiments and mixed seasonings |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, mustard flour or meal or prepared mustard may be used |
||||||||||||||
mustard flour and meal and prepared mustard |
Manufacture from materials of any heading |
||||||||||||||
ex 2104 |
Soups and broths and preparations therefor |
Manufacture from materials of any heading, except prepared or preserved vegetables of headings 2002 to 2005 |
|||||||||||||
2106 |
Food preparations not elsewhere specified or included |
Manufacture in which:
|
|||||||||||||
ex Chapter 22 |
Beverages, spirits and vinegar; except for: |
Manufacture in which:
|
|||||||||||||
2202 |
Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading 2009 |
Manufacture in which:
|
|||||||||||||
2207 |
Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher ethyl alcohol and other spirits, denatured, of any strength |
Manufacture:
|
|||||||||||||
2208 |
Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages |
Manufacture:
|
|||||||||||||
ex Chapter 23 |
Residues and waste from the food industries; prepared animal fodder; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 2301 |
Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption |
Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained |
|||||||||||||
ex 2303 |
Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 % by weight |
Manufacture in which all the maize used must be wholly obtained |
|||||||||||||
ex 2306 |
Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3 % of olive oil |
Manufacture in which all the olives used must be wholly obtained |
|||||||||||||
2309 |
Preparations of a kind used in animal feeding |
Manufacture in which:
|
|||||||||||||
ex Chapter 24 |
Tobacco and manufactured tobacco substitutes; except for: |
Manufacture in which all the materials of Chapter 24 used must be wholly obtained |
|||||||||||||
ex 2402 |
Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes |
Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating |
|||||||||||||
ex 2403 |
Smoking tobacco |
Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating |
|||||||||||||
ex Chapter 25 |
Salt; sulphur; earths and stone; plastering materials, lime and cement; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 2504 |
Natural crystalline graphite, with enriched carbon content, purified and ground |
Enriching of the carbon content, purifying and grinding of crude crystalline graphite |
|||||||||||||
ex 2515 |
Marble, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm |
Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm |
|||||||||||||
ex 2516 |
Granite, porphyry, basalt, sandstone and other monumental and building stone, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm |
Cutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding 25 cm |
|||||||||||||
ex 2518 |
Calcined dolomite |
Calcination of uncalcined dolomite |
|||||||||||||
ex 2519 |
Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, natural magnesium carbonate (magnesite) may be used |
|||||||||||||
ex 2520 |
Plasters specially prepared for dentistry |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex 2524 |
Natural asbestos fibres |
Manufacture from asbestos concentrate |
|||||||||||||
ex 2525 |
Mica powder |
Grinding of mica or mica waste |
|||||||||||||
ex 2530 |
Earth colours, calcined or powdered |
Calcination or grinding of earth colours |
|||||||||||||
Chapter 26 |
Ores, slag and ash |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 27 |
Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 2707 |
Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuels |
Operations of refining and/or one or more specific process(es) (1) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
ex 2709 |
Crude oils obtained from bituminous minerals |
Destructive distillation of bituminous materials |
|||||||||||||
2710 |
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparations |
Operations of refining and/or one or more specific process(es) (2) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
2711 |
Petroleum gases and other gaseous hydrocarbons |
Operations of refining and/or one or more specific process(es) (3) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
2712 |
Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes and similar products obtained by synthesis or by other processes, whether or not coloured |
Operations of refining and/or one or more specific process(es) (4) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
2713 |
Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materials |
Operations of refining and/or one or more specific process(es) (5) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
2714 |
Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks |
Operations of refining and/or one or more specific process(es) (6) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
2715 |
Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs) |
Operations of refining and/or one or more specific process(es) (7) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
ex Chapter 28 |
Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 2805 |
‘Mischmetall’ |
Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
|||||||||||||
ex 2811 |
Sulphur trioxide |
Manufacture from sulphur dioxide |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 2833 |
Aluminium sulphate |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex 2840 |
Sodium perborate |
Manufacture from disodium tetraborate pentahydrate |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 2852 |
Mercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives Mercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds Mercury compounds of diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents, whether or not on a backing, other than those of heading 3002 or 3006 ; certified reference materials |
Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used may not exceed 20 % of the ex-works price of the product Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used may not exceed 20 % of the ex-works price of the product Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
Mercury compounds of chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
ex Chapter 29 |
Organic chemicals; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 2901 |
Acyclic hydrocarbons for use as power or heating fuels |
Operations of refining and/or one or more specific process(es) (8) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
ex 2902 |
Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels |
Operations of refining and/or one or more specific process(es) (9) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used, provided that their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
ex 2905 |
Metal alcoholates of alcohols of this heading and of ethanol |
Manufacture from materials of any heading, including other materials of heading 2905 . However, metal alcoholates of this heading may be used, provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
2915 |
Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives |
Manufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 2932 |
Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives |
Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used may not exceed 20 % of the ex-works price of the product Manufacture from materials of any heading |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
2933 |
Heterocyclic compounds with nitrogen hetero-atom(s) only |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
2934 |
Nucleic acids and their salts; other heterocyclic compounds |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
2939 80 |
Alkaloids of non-plant origin Heterocyclic compounds with nitrogen hetero-atom(s) only |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
Nucleic acids and their salts; other heterocyclic compounds |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex Chapter 30 |
Pharmaceutical products; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
|||||||||||||
ex 3002 |
Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera and other blood fractions and modified immunological products, whether or not obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products: |
||||||||||||||
products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packings for retail sale |
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product |
||||||||||||||
other: |
|||||||||||||||
human blood |
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product |
||||||||||||||
animal blood prepared for therapeutic or prophylactic uses |
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product |
||||||||||||||
blood fractions other than antisera, haemoglobin, blood globulins and serum globulins |
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product |
||||||||||||||
haemoglobin, blood globulins and serum globulins |
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product |
||||||||||||||
other |
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product |
||||||||||||||
Heterocyclic compounds with nitrogen hetero-atom(s) only |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds |
Manufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used may not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
3003 and 3004 |
Medicaments (excluding goods of headings 3002 , 3005 or 3006 ):
|
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials of heading 3003 or 3004 may be used provided their value, taken together, does not exceed 20 % of the ex-works price of the product Manufacture in which:
|
|||||||||||||
ex 3006 |
Appliances identifiable for ostomy use made of plastic |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex Chapter 31 |
Fertilisers; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3105 |
Mineral or chemical fertilizers containing two or three of the fertilizing elements nitrogen, phosphorus and potassium other fertilisers; goods of this Chapter, in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for:
|
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex Chapter 32 |
Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3201 |
Tannins and their salts, ethers, esters and other derivatives |
Manufacture from tanning extracts of vegetable origin |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
3205 |
Colour lakes; preparations as specified in Note 3 to this Chapter based on colour lakes (10) |
Manufacture from materials of any heading, except headings 3203 , 3204 and 3205 . However, materials from heading 3205 may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex Chapter 33 |
Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
3301 |
Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils |
Manufacture from materials of any heading, including materials of a different ‘group’ (11) in this heading. However, materials of the same group may be used, provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex Chapter 34 |
Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3403 |
Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, provided they represent less than 70 % by weight |
Operations of refining and/or one or more specific process(es) (12) |
Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
||||||||||||
3404 |
Artificial waxes and prepared waxes:
|
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product |
|||||||||||||
other |
Manufacture from materials of any heading, except:
|
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading 3823 , and |
|||||||||||||||
materials of heading 3404 However, these materials may be used provided their value does not exceed 20 % of the ex-works price of the product |
|||||||||||||||
ex Chapter 35 |
Albuminoidal substances; modified starches; enzymes; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
3505 |
Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches: |
||||||||||||||
starch ethers and esters |
Manufacture from materials of any heading, including other materials of heading 3505 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
other |
Manufacture from materials of any heading, except those of heading 1108 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 3507 |
Prepared enzymes not elsewhere specified or included |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
Chapter 36 |
Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex Chapter 37 |
Photographic or cinematographic goods; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
3701 |
Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs: |
||||||||||||||
Instant print film for colour photography |
Manufacture in which all the materials used are classified in a heading other than headings 3701 or 3702 . However, materials from heading 3702 may be used provided their value does not exceed 30 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
other |
Manufacture in which all the materials used are classified in a heading other than heading 3701 or 3702 . However, materials from headings 3701 and 3702 may be used provided their value, taken together, does not exceed 20 % of the ex-works price of the product; |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
3702 |
Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed |
Manufacture in which all the materials used are classified within a heading other than heading 3701 or 3702 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
3704 |
Photographic plates, film paper, paperboard and textiles, exposed but not developed |
Manufacture in which all the materials used are classified within a heading other than headings 3701 to 3704 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex Chapter 38 |
Miscellaneous chemical products; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3801 |
Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
Graphite in paste form, being a mixture of more than 30 % by weight of graphite with mineral oils |
Manufacture in which the value of all the materials of heading 3403 used does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 3803 |
Refined tall oil |
Refining of crude tall oil |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3805 |
Spirits of sulphate turpentine, purified |
Purification by distillation or refining of raw spirits of sulphate turpentine |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3806 |
Ester gums |
Manufacture from resin acids |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 3807 |
Wood pitch (wood tar pitch) |
Distillation of wood tar |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
3808 |
Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers) |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3809 |
Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3810 |
Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3811 |
Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils: |
||||||||||||||
prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals |
Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 % of the ex-works price of the product. |
||||||||||||||
other |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
3812 |
Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilizers for rubber or plastics |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3813 |
Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3814 |
Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or vanish removers |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3818 |
Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3819 |
Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3820 |
Anti-freezing preparations and prepared de-icing fluids |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex 3821 |
Prepared culture media for the maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells. |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3822 |
Diagnostic or laboratory reagents on a backing and prepared diagnostic or laboratory reagents, whether or not on a backing, other than those of heading 3002 or 3006 ; certified reference materials |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3823 |
Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols: |
||||||||||||||
industrial monocarboxylic fatty acids; acid oils from refining |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||||
industrial fatty alcohols |
Manufacture from materials of any heading, including other materials of heading 3823 |
||||||||||||||
3824 |
Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: |
||||||||||||||
the following of this heading: prepared binders for foundry moulds or cores based on natural resinous products naphthenic acids, their water-insoluble salts and their esters sorbitol other than that of heading 2905 |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts ion exchangers getters for vacuum tubes |
|||||||||||||||
alkaline iron oxide for the purification of gas ammoniacal gas liquors and spent oxide produced in coal gas purification sulphonaphthenic acids, their water-insoluble salts and their esters fusel oil and Dippel's oil mixtures of salts having different anions copying pastes with a basis of gelatin, whether or not on a paper or textile backing |
|||||||||||||||
other |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
3826 |
Biodiesel and mixtures thereof, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
3901 to 3915 |
Plastics in primary forms, waste, parings and scrap of plastics. except for headings ex 3907 and 3912 for which the rules are set out below: |
||||||||||||||
addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
other |
Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (13) |
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
ex 3907 |
Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS) |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used, provided their value does not exceed 50 % of the ex-works price of the product (14) |
|||||||||||||
Polyester |
Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A) |
||||||||||||||
3912 |
Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms |
Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20 % of the ex-works price of the product |
|||||||||||||
3916 to 3921 |
Semi–manufactures and articles of plastics; except for headings ex 3916 , ex 3917 , ex 3920 and ex 3921 , for which the rules are set out below: |
||||||||||||||
flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked other: |
Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product |
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
other |
Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (15) |
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
ex 3916 and ex 3917 |
Profile shapes and tubes |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
ex 3920 |
Ionomer sheet or film |
Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium |
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
Sheets of regenerated cellulose, polyamides or polyethylene |
Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20 % of the ex-works price of the product |
||||||||||||||
ex 3921 |
Foils of plastic, metallised |
Manufacture from highly transparent polyester foils with a thickness of less than 23 micron (16) |
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
3922 to 3926 |
Articles of plastics |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex Chapter 40 |
Rubber and articles thereof; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 4001 |
Laminated slabs of crepe rubber for shoes |
Lamination of sheets of natural rubber |
|||||||||||||
4005 |
Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip |
Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50 % of the ex-works price of the product |
|||||||||||||
4012 |
Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber: |
||||||||||||||
retreaded pneumatic, solid or cushion tyres, of rubber |
Retreading of used tyres |
||||||||||||||
other |
Manufacture from materials of any heading, except those of heading 4011 or 4012 |
||||||||||||||
ex 4017 |
Articles of hard rubber |
Manufacture from hard rubber |
|||||||||||||
ex Chapter 41 |
Raw hides and skins (other than furskins) and leather; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 4102 |
Raw skins of sheep or lambs, without wool on |
Removal of wool from sheep or lamb skins, with wool on |
|||||||||||||
4104 to 4106 |
Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared |
Retanning of pre-tanned leather |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||
4107 , 4112 and 4113 |
Leather further prepared after tanning or crusting, including parchment-dressed leather, without wool or hair on, whether or not split, other than leather of heading 4114 |
Retanning of pre-tanned leather |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||
ex 4114 |
Patent leather and patent laminated leather; metallised leather |
Manufacture from leather of headings 4104 to 4107 , 4112 or 4113 , provided its value does not exceed 50 % of the ex-works price of the product |
|||||||||||||
Chapter 42 |
Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut) |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 43 |
Furskins and artificial fur; manufactures thereof; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 4302 |
Tanned or dressed furskins, assembled: |
||||||||||||||
plates, crosses and similar forms |
Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins |
||||||||||||||
other |
Manufacture from non-assembled, tanned or dressed furskins |
||||||||||||||
4303 |
Articles of apparel, clothing accessories and other articles of furskin |
Manufacture from non-assembled tanned or dressed furskins of heading 4302 |
|||||||||||||
ex Chapter 44 |
Wood and articles of wood; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 4403 |
Wood roughly squared |
Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down |
|||||||||||||
ex 4407 |
Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or finger-jointed |
Planing, sanding or finger-jointing |
|||||||||||||
ex 4408 |
Veneer sheets and sheets for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or finger-jointed |
Splicing, planing, sanding or finger-jointing |
|||||||||||||
ex 4409 |
Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed:
|
Sanding or finger-jointing |
|||||||||||||
beadings and mouldings |
Beading or moulding |
||||||||||||||
ex 4410 to ex 4413 |
Beadings and mouldings, including moulded skirting and other moulded boards |
Beading or moulding |
|||||||||||||
ex 4415 |
Packing cases, boxes, crates, drums and similar packings, of wood |
Manufacture from boards not cut to size |
|||||||||||||
ex 4416 |
Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood |
Manufacture from riven staves, not further worked than sawn on the two principal surfaces |
|||||||||||||
ex 4418 |
Builders' joinery and carpentry of wood |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, cellular wood panels, shingles and shakes may be used |
|||||||||||||
Beadings and mouldings |
Beading or moulding |
||||||||||||||
ex 4421 |
Match splints; wooden pegs or pins for footwear |
Manufacture from wood of any heading, except drawn wood of heading 4409 |
|||||||||||||
ex Chapter 45 |
Cork and articles of cork; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
4503 |
Articles of natural cork |
Manufacture from cork of heading 4501 |
|||||||||||||
Chapter 46 |
Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
Chapter 47 |
Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 48 |
Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 4811 |
Paper and paperboard, ruled, lined or squared only |
Manufacture from paper-making materials of Chapter 47 |
|||||||||||||
4816 |
Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading 4809 ), duplicator stencils and offset plates, of paper, whether or not put up in boxes |
Manufacture from paper-making materials of Chapter 47 |
|||||||||||||
4817 |
Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery |
Manufacture in which:
|
|||||||||||||
ex 4818 |
Toilet paper |
Manufacture from paper-making materials of Chapter 47 |
|||||||||||||
ex 4819 |
Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres |
Manufacture in which:
|
|||||||||||||
ex 4820 |
Letter pads |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex 4823 |
Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape |
Manufacture from paper-making materials of Chapter 47 |
|||||||||||||
ex Chapter 49 |
Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
4909 |
Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings |
Manufacture from materials of any heading, except those of heading 4909 or 4911 |
|||||||||||||
4910 |
Calendars of any kind, printed, including calendar blocks: |
||||||||||||||
calendars of the ‘perpetual’ type or with replaceable blocks mounted on bases other than paper or paperboard |
Manufacture in which:
|
||||||||||||||
other |
Manufacture from materials of any heading, except those of heading 4909 or 4911 |
||||||||||||||
ex Chapter 50 |
Silk; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 5003 |
Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed |
Carding or combing of silk waste |
|||||||||||||
5004 to ex 5006 |
Silk yarn and yarn spun from silk waste |
Manufacture from (17):
|
|||||||||||||
5007 |
Woven fabrics of silk or of silk waste |
Manufacture from yarn (18) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
ex Chapter 51 |
Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
5106 to 5110 |
Yarn of wool, of fine or coarse animal hair or of horsehair |
Manufacture from (19):
|
|||||||||||||
5111 to 5113 |
Woven fabrics of wool, of fine or coarse animal hair or of horsehair: |
Manufacture from yarn (20) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
ex Chapter 52 |
Cotton; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
5204 to 5207 |
Yarn and thread of cotton |
Manufacture from (21):
|
|||||||||||||
5208 to 5212 |
Woven fabrics of cotton |
Manufacture from yarn (22) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
ex Chapter 53 |
Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
5306 to 5308 |
Yarn of other vegetable textile fibres; paper yarn |
Manufacture from (23):
|
|||||||||||||
5309 to 5311 |
Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn |
Manufacture from yarn (24) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
5401 to 5406 |
Yarn, monofilament and thread of man-made filaments |
Manufacture from (25):
|
|||||||||||||
5407 and 5408 |
Woven fabrics of man-made filament yarn |
Manufacture from yarn (26) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
5501 to 5507 |
Man-made staple fibres |
Manufacture from chemical materials or textile pulp |
|||||||||||||
5508 to 5511 |
Sewing thread of man-made staple fibres |
Manufacture from (27):
|
|||||||||||||
5512 to 5516 |
Woven fabrics of man-made staple fibres: |
Manufacture from yarn (28) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
ex Chapter 56 |
Wadding, felt and nonwovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for: |
Manufacture from (29):
|
|||||||||||||
5602 |
Felt, whether or not impregnated, coated, covered or laminated: |
||||||||||||||
needleloom felt |
Manufacture from (30):
|
||||||||||||||
other |
Manufacture from (30):
|
||||||||||||||
5604 |
Rubber thread and cord, textile covered textile yarn, and strip and the like of heading 5404 or 5405 , impregnated, coated, covered or sheathed with rubber or plastics: |
||||||||||||||
rubber thread and cord, textile covered |
Manufacture from rubber thread or cord, not textile covered |
||||||||||||||
other |
Manufacture from (31):
|
||||||||||||||
5605 |
Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , combined with metal in the form of thread, strip or powder or covered with metal |
Manufacture from (32):
|
|||||||||||||
5606 |
Gimped yarn, and strip and the like of heading 5404 or 5405 , gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn |
Manufacture from (33):
|
|||||||||||||
Chapter 57 |
Carpets and other textile floor coverings: |
||||||||||||||
of needleloom felt |
Manufacture from (34):
However, jute fabric may be used as a backing. |
||||||||||||||
of other felt |
Manufacture from (34):
|
||||||||||||||
Other |
Manufacture from yarn (35) However, jute fabric may be used as a backing. |
||||||||||||||
ex Chapter 58 |
special woven fabrics; tufted textile fabrics; tapestries; trimmings; embroidery; except for: |
Manufacture from yarn (35) |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
5805 |
Hand-woven tapestries of the type Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made-up |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
5810 |
Embroidery in the piece, in strips or in motifs |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
5901 |
Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations |
Manufacture from yarn |
|||||||||||||
5902 |
Tyre cord fabric of high-tenacity yarn of nylon or other polyamides, polyesters or viscose rayon |
Manufacture from yarn |
|||||||||||||
5903 |
Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902 |
Manufacture from yarn |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
5904 |
Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape |
Manufacture from yarn (36) |
|||||||||||||
5905 |
Textile wall coverings. |
Manufacture from yarn |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
5906 |
Rubberised textile fabrics, other than those of heading 5902 |
Manufacture from yarn |
|||||||||||||
5907 |
Textile fabrics otherwise impregnated, coated or covered; painted canvas, being theatrical scenery, studio back-cloths or the like |
Manufacture from yarn |
Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||||
5908 |
Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefor, whether or not impregnated: |
||||||||||||||
incandescent gas mantles, impregnated |
Manufacture from tubular knitted gas mantle fabric |
||||||||||||||
Other |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||||
5909 to 5911 |
Textile articles of a kind suitable for industrial use:
|
Manufacture from yarn or waste fabrics or rags of heading 6310 Manufacture from yarn (37) Manufacture from yarn (37) |
|||||||||||||
Chapter 60 |
Knitted or crocheted fabrics |
Manufacture from yarn (37) |
|||||||||||||
Chapter 61 |
Articles of apparel and clothing accessories, knitted or crocheted: |
||||||||||||||
obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form |
Manufacture from fabric |
||||||||||||||
other |
Manufacture from yarn (37) |
||||||||||||||
ex Chapter 62 |
Articles of apparel and clothing accessories, not knitted or crocheted; except for: |
Manufacture from fabric |
|||||||||||||
6213 and 6214 |
Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like: |
||||||||||||||
embroidered |
Manufacture from yarn (38) |
Manufacture from unembroidered fabric, provided the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (38) |
|||||||||||||
other |
Manufacture from yarn (39) |
Making up followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted goods of headings 6213 and 6214 used does not exceed 47.5 % of the ex-works price of the product |
|||||||||||||
6217 |
Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 : |
||||||||||||||
embroidered |
Manufacture from yarn (40) |
Manufacture from unembroidered fabric, provided the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (40) |
|||||||||||||
fire-resistant equipment of fabric covered with foil of aluminised polyester |
Manufacture from yarn (40) |
Manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product (40) |
|||||||||||||
interlinings for collars and cuffs, cut out |
Manufacture in which:
|
||||||||||||||
ex Chapter 63 |
Other made-up textile articles; sets; worn clothing and worn textile articles; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
6301 to 6304 |
Blankets, travelling rugs, bed linen, etc.; curtains etc.; other furnishing articles: |
||||||||||||||
of felt, of non-wovens |
Manufacture from (41):
|
||||||||||||||
other: |
|||||||||||||||
embroidered |
Manufacture from unembroidered fabric (other than knitted or crocheted), provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product |
||||||||||||||
other |
|||||||||||||||
6305 |
Sacks and bags, of a kind used for the packing of goods. |
Manufacture from yarn (44) |
|||||||||||||
6306 |
Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods |
Manufacture from fabric |
|||||||||||||
6307 |
Other made-up articles, including dress patterns |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
6308 |
Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered tablecloths or serviettes, or similar textile articles, put up in packings for retail sale |
Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated provided their total value does not exceed 25 % of the ex-works price of the set |
|||||||||||||
ex Chapter 64 |
Footwear, gaiters and the like; except for: |
Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406 |
|||||||||||||
6406 |
Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable insoles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 65 |
Headgear and parts thereof; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
6505 |
Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; Hairnets of any material, whether or not lined or trimmed |
Manufacture from yarn or textile fibres (46) |
|||||||||||||
ex Chapter 66 |
Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
6601 |
Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas) |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
Chapter 67 |
Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 68 |
Articles of stone, plaster, cement, asbestos, mica or similar materials; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 6803 |
Articles of slate or of agglomerated slate |
Manufacture from worked slate |
|||||||||||||
ex 6812 |
Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate |
Manufacture from materials of any heading |
|||||||||||||
ex 6814 |
Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials |
Manufacture from worked mica (including agglomerated or reconstituted mica) |
|||||||||||||
Chapter 69 |
Ceramic products |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 70 |
Glass and glassware; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 7003 ex 7004 and ex 7005 |
Glass with a non-reflecting layer |
Manufacture from materials of heading 7001 |
|||||||||||||
7006 |
Glass of heading 7003 , 7004 or 7005 , bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials: |
||||||||||||||
glass plate substrate coated with dielectric thin film, semi-conductor grade, in accordance with SEMII standards (47) |
Manufacture from materials of heading 7006 |
||||||||||||||
other |
Manufacture from materials of heading 7001 |
||||||||||||||
7007 |
Safety glass, consisting of toughened (tempered) or laminated glass |
Manufacture from materials of heading 7001 |
|||||||||||||
7008 |
Multiple-walled insulating units of glass |
Manufacture from materials of heading 7001 |
|||||||||||||
7009 |
Glass mirrors, whether or not framed, including rear-view mirrors |
Manufacture from materials of heading 7001 |
|||||||||||||
7010 |
Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass. |
Manufacture in which all the materials used are classified within a heading other than that of the product |
Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product |
||||||||||||
7013 |
Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018 ) |
Manufacture in which all the materials used are classified within a heading other than that of the product |
Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product or Hand-decoration (with the exception of silk-screen printing) of hand-blown glassware, provided the value of the hand-blown glassware does not exceed 50 % of the ex-works price of the product |
||||||||||||
ex 7019 |
Articles (other than yarn) of glass fibres |
Manufacture from:
|
|||||||||||||
ex Chapter 71 |
Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 7101 |
Natural or cultured pearls, graded and temporarily strung for convenience of transport |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex 7102 , ex 7103 and ex 7104 |
Worked precious or semi-precious stones (natural, synthetic or reconstructed) |
Manufacture from unworked precious or semi-precious stones |
|||||||||||||
7106 7108 , and 7110 |
Precious metals: |
||||||||||||||
unwrought |
Manufacture from materials not classified in heading 7106 , 7108 or 7110 |
Electrolytic, thermal or chemical separation of precious metals of heading 7106 , 7108 or 7110 or Alloying of precious metals of heading 7106 , 7108 or 7110 with each other or with base metals |
|||||||||||||
semi-manufactured or in powder form |
Manufacture from unwrought precious metals |
||||||||||||||
ex 7107 , ex 7109 and ex 7111 |
Metals clad with precious metals, semi-manufactured |
Manufacture from metals clad with precious metals, unwrought |
|||||||||||||
7116 |
Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed) |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
7117 |
Imitation jewellery |
Manufacture in which all the materials used are classified within a heading other than that of the product |
Manufacture from base metal parts, not plated or covered with precious metals, provided the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||||
ex Chapter 72 |
Iron and steel; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
7207 |
Semi-finished products of iron or non-alloy steel |
Manufacture from materials of heading 7201 , 7202 , 7203 , 7204 or 7205 |
|||||||||||||
7208 to 7216 |
Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel |
Manufacture from ingots or other primary forms of heading 7206 |
|||||||||||||
7217 |
Wire of iron or non-alloy steel |
Manufacture from semi-finished materials of heading 7207 |
|||||||||||||
ex 7218 , 7219 to 7222 |
Semi-finished products, flat-rolled products, bars and rods, angles, shapes and sections of stainless steel |
Manufacture from ingots or other primary forms of heading 7218 |
|||||||||||||
7223 |
Wire of stainless steel |
Manufacture from semi-finished materials of heading 7218 |
|||||||||||||
ex 7224 , 7225 to 7228 |
Semi-finished products, flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; hollow drill bars and rods, of alloy or non-alloy steel |
Manufacture from ingots or other primary forms of heading 7206 , 7218 or 7224 |
|||||||||||||
7229 |
Wire of other alloy steel |
Manufacture from semi-finished materials of heading 7224 |
|||||||||||||
ex Chapter 73 |
Articles of iron or steel; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 7301 |
Sheet piling |
Manufacture from materials of heading 7206 |
|||||||||||||
7302 |
Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails |
Manufacture from materials of heading 7206 |
|||||||||||||
7304 , 7305 and 7306 |
Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel |
Manufacture from materials of heading 7206 , 7207 , 7218 or 7224 |
|||||||||||||
ex 7307 |
Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts |
Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, the value of which does not exceed 35 % of the ex-works price of the product |
|||||||||||||
7308 |
Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading 7301 may not be used |
|||||||||||||
ex 7315 |
Skid chain |
Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product |
|||||||||||||
ex Chapter 74 |
Copper and articles thereof; except for: |
Manufacture in which:
|
|||||||||||||
7401 |
Copper mattes; cement copper (precipitated copper) |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
7402 |
Unrefined copper; copper anodes for electrolytic refining |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
7403 |
Refined copper and copper alloys, unwrought: |
||||||||||||||
refined copper |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||||
copper alloys and refined copper containing other elements |
Manufacture from refined copper, unwrought, or waste and scrap of copper |
||||||||||||||
7404 |
Copper waste and scrap |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
7405 |
Master alloys of copper |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 75 |
Nickel and articles thereof; except for: |
Manufacture in which:
|
|||||||||||||
7501 to 7503 |
Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrap |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 76 |
Aluminium and articles thereof; except for: |
Manufacture in which:
|
|||||||||||||
7601 |
Unwrought aluminium |
Manufacture in which:
|
Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium |
||||||||||||
7602 |
Aluminium waste and scrap |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 7616 |
Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium |
Manufacture in which:
|
|||||||||||||
Chapter 77 |
Reserved for possible future use in the HS |
||||||||||||||
ex Chapter 78 |
Lead and articles thereof; except for: |
Manufacture in which:
|
|||||||||||||
7801 |
Unwrought lead |
||||||||||||||
refined lead |
Manufacture from ‘bullion’ or ‘work’ lead |
||||||||||||||
other |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading 7802 may not be used |
||||||||||||||
7802 |
Lead waste and scrap |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 79 |
Zinc and articles thereof; except for: |
Manufacture in which:
|
|||||||||||||
7901 |
Unwrought zinc |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading 7902 may not be used |
|||||||||||||
7902 |
Zinc waste and scrap |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex Chapter 80 |
Tin and articles thereof; except for: |
Manufacture in which:
|
|||||||||||||
8001 |
Unwrought tin |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading 8002 may not be used |
|||||||||||||
8002 and 8007 |
Tin waste and scrap; other articles of tin |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
Chapter 81 |
Other base metals; cermets; articles thereof: |
||||||||||||||
other base metals, wrought; articles thereof |
Manufacture in which the value of all the materials classified within the same heading as the product used does not exceed 50 % of the ex-works price of the product |
||||||||||||||
other |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||||
ex Chapter 82 |
Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
8206 |
Tools of two or more of headings 8202 to 8205 , put up in sets for retail sale |
Manufacture in which all the materials used are classified in a heading other than headings 8202 to 8205 . However, tools of headings 8202 to 8205 may be incorporated into the set provided their value does not exceed 15 % of the ex-works price of the set |
|||||||||||||
8207 |
Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools |
Manufacture in which:
|
|||||||||||||
8208 |
Knives and cutting blades, for machines or for mechanical appliances |
Manufacture in which:
|
|||||||||||||
ex 8211 |
Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208 |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, knife blades and handles of base metal may be used |
|||||||||||||
8214 |
Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files) |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, handles of base metal may be used |
|||||||||||||
8215 |
Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, handles of base metal may be used |
|||||||||||||
ex Chapter 83 |
Miscellaneous articles of base metal; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 8302 |
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading 8302 may be used provided their value does not exceed 20 % of the ex-works price of the product |
|||||||||||||
ex 8306 |
Statuettes and other ornaments, of base metal |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, the other materials of heading 8306 may be used provided their value does not exceed 30 % of the ex-works price of the product |
|||||||||||||
ex Chapter 84 |
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for: |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 8401 |
Nuclear fuel elements |
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product |
|||||||||||||
8402 |
Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8403 and ex 8404 |
Central heating boilers other than those of heading 8402 and auxiliary plant for central heating boilers |
Manufacture in which all the materials used are classified in a heading other than heading 8403 or 8404 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
8406 |
Steam turbines and other vapour turbines |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8407 |
Spark-ignition reciprocating or rotary internal combustion piston engines |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8408 |
Compression-ignition internal combustion piston engines (diesel or semi-diesel engines |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8409 |
Parts suitable for use solely or principally with the engines of heading 8407 or 8408 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8411 |
Turbo-jets, turbo-propellers and other gas turbines |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8412 |
Other engines and motors |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 8413 |
Rotary positive displacement pumps |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product |
||||||||||||
ex 8414 |
Industrial fans, blowers and the like |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8415 |
Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8418 |
Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air-conditioning machines of heading 8415 |
Manufacture in which:
the value of all the non-originating materials used does not exceed the value of the originating materials used |
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
ex 8419 |
Machines for wood, paper pulp, paper and paperboard industries |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8420 |
Calendering or other rolling machines, other than for metals or glass, and cylinders therefor |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8423 |
Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8425 to 8428 |
Lifting, handling, loading or unloading machinery |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8429 |
Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers: |
||||||||||||||
road rollers |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
other |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
8430 |
Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 8431 |
Parts suitable for use solely or principally with road rollers |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8439 |
Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8441 |
Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 8443 |
Office machines (for example, typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines) |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8444 to 8447 |
Machines of these headings for use in the textile industry |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 8448 |
Auxiliary machinery for use with machines of headings 8444 and 8445 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8452 |
Sewing machines, other than book-sewing machines of heading 8440 ; furniture, bases and covers specially designed for sewing machines; sewing machine needles: |
||||||||||||||
sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor |
Manufacture:
|
||||||||||||||
other |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
ex 8456 , 8457 to 8465 and ex 8466 |
Machine-tools and machines and their parts and accessories of headings 8456 to 8466 ; except: |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
water-jet cutting machines parts and accessories of water-jet cutting machines |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
8469 to 8472 |
Office machines (for example, typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines) |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8480 |
Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
8482 |
Ball or roller bearings |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8484 |
Gaskets and similar joints of metal sheeting; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 8486 |
Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes, and parts and accessories thereof |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
Machine tools (including presses) for working metal by bending, folding, straightening, flattening, and parts and accessories thereof |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass, and parts and accessories thereof |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Marking-out instruments which are pattern generating apparatus of a kind used for producing masks or reticles from photoresist coated substrates; parts and accessories thereof |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Moulds, injection or compression types |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
Lifting, handling, loading or unloading machinery |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
8487 |
Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this Chapter |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex Chapter 85 |
Electrical machinery and equipment and parts thereof; sound recorders and reproducers; television image and sound recorders and reproducers, and parts and accessories of such articles except for: |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8501 |
Electric motors and generators (excluding generating sets) |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8502 |
Electric generating sets and rotary converters |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 8504 |
Power supply units for automatic data-processing machines |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 8517 |
Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wireless network (such as a local or wide area network), other than transmission or reception apparatus of heading 8443 , 8525 , 8527 or 8528 |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
ex 8518 |
Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; audi-frequency electric amplifiers; electric sound amplifier sets |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8519 |
Sound recording or reproducing apparatus |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8521 |
Video recording or reproducing apparatus |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8522 |
Parts and accessories suitable for use solely or principally with the apparatus of heading 8519 or 8521 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8523 |
Discs, tapes, solid-state non-volatile storage devices, ‘smart cards’ and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of Chapter 37: |
||||||||||||||
Unrecorded discs, tapes, solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37; |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Recorded discs, tapes, solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37 |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
Matrices and masters for the production of discs, but excluding products of Chapter 37 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Proximity cards and ‘smart cards’ with two or more electronic integrated circuits |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
‘Smart cards’ with one electronic integrated circuit |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
8525 |
Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras; digital cameras and video camera recorders; |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8526 |
Radar apparatus, radio navigational aid apparatus and radio remote control apparatus |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8527 |
Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8528 |
Monitors and projectors, not incorporating television reception apparatus; Reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus: |
||||||||||||||
Monitors and projectors, not incorporating television reception apparatus, of a kind solely or principally used in an automatic data-processing system of heading 8471 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Other monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
8529 |
Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528 : |
||||||||||||||
suitable for use solely or principally with video recording or reproducing apparatus |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
suitable for use solely or principally with monitors and projectors, not incorporating television reception apparatus, of a kind solely or principally used in an automatic data-processing system of heading 8471 |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
Other |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
8535 |
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits, for a voltage exceeding 1 000 volts |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8536 |
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits for a voltage not exceeding 1 000 V connectors for optical fibres, optical fibre bundles or cables: |
||||||||||||||
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits for a voltage not exceeding 1 000 volts |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
Connectors for optical fibres, optical fibre bundles or cables: |
|||||||||||||||
of plastics |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
of ceramics |
Manufacture in which all the materials used are classified within a heading other than that of the product |
||||||||||||||
of copper |
Manufacture in which:
|
||||||||||||||
8537 |
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 8541 |
Diodes, transistors and similar semi-conductor devices, except wafers not yet cut into chips |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
8542 |
Electronic integrated circuits: |
||||||||||||||
monolithic integrated circuits |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
multichips which are parts of machinery or apparatus, not specified or included elsewhere in this Chapter |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
other |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
8544 |
Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8545 |
Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8546 |
Electrical insulators of any material |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8547 |
Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8548 |
Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter: |
||||||||||||||
Electronic microassemblies |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
Other |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
ex Chapter 86 |
Railway or tramway locomotives, rolling-stock and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds; except for: |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8608 |
Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex Chapter 87 |
Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for: |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
8709 |
Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8710 |
Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8711 |
Motor-cycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars: |
||||||||||||||
with reciprocating internal combustion piston engine of a cylinder capacity: |
|||||||||||||||
not exceeding 50 cc |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 20 % of the ex-works price of the products |
|||||||||||||
exceeding 50 cc |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
other |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
ex 8712 |
Bicycles without ball bearings |
Manufacture from materials of any heading, except those of heading 8714 |
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8715 |
Baby carriages and parts thereof |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
8716 |
Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex Chapter 88 |
Aircraft, spacecraft, and parts thereof; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex 8804 |
Rotochutes |
Manufacture from materials of any heading, including other materials of heading 8804 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
8805 |
Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles |
Manufacture in which all the materials used are classified within a heading other than that of the product |
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
Chapter 89 |
Ships, boats and floating structures |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, hulls of heading 8906 may not be used |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
ex Chapter 90 |
Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for: |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9001 |
Optical fibres and optical fibre bundles; optical fibre cables other than those of heading 8544 ; sheets and plates of polarising material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9002 |
Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9004 |
Spectacles, goggles and the like, corrective, protective or other |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex 9005 |
Binoculars, monoculars, other optical telescopes, and mountings therefor |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 9006 |
Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9007 |
Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9011 |
Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
ex 9014 |
Other navigational instruments and appliances |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9015 |
Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9016 |
Balances of a sensitivity of 5 cg or better, with or without weights |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9017 |
Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this Chapter |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9018 |
Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments: |
||||||||||||||
Dentists' chairs incorporating dental appliances or dentists' spittoons |
Manufacture from materials of any heading, including other materials of heading 9018 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
Other |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
|||||||||||||
9019 |
Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
9020 |
Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the products |
||||||||||||
9024 |
Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics) |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9025 |
Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9026 |
Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014 , 9015 , 9028 or 9032 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9027 |
Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9028 |
Gas, liquid or electricity supply or production meters, including calibrating meters therefor: |
||||||||||||||
Parts and accessories |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Other |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
|||||||||||||
9029 |
Revolution counters, production counters, taximeters, milometers, pedometers and the like; speed indicators and tachometers, other than those of heading 9014 or 9015 ; stroboscopes |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9030 |
Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9031 |
Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter; profile projectors |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9032 |
Automatic regulating or controlling instruments and apparatus |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9033 |
Parts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90 |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
ex Chapter 91 |
Clocks and watches and parts thereof; except for: |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
9105 |
Other clocks |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9109 |
Clock movements, complete and assembled |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9110 |
Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements |
Manufacture:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9111 |
Watch cases and parts thereof |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9112 |
Clock cases and cases of a similar type for other goods of this Chapter, and parts thereof |
Manufacture in which:
|
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the products |
||||||||||||
9113 |
Watch straps, watch bands and watch bracelets, and parts thereof: |
||||||||||||||
of base metal, whether or not gold- or silver-plated, or of metal clad with precious metal |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||||
Other |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||||||
Chapter 92 |
Musical instruments; parts and accessories of such articles |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
|||||||||||||
Chapter 93 |
Arms and ammunition; parts and accessories thereof |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex Chapter 94 |
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product |
||||||||||||
ex 9401 and ex 9403 |
Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or less |
Manufacture in which all the materials used are classified within a heading other than that of the product or manufacture from cotton cloth already made up in a form ready for use of heading 9401 or 9403 , provided: |
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the products |
||||||||||||
its value does not exceed 25 % of the ex-works price of the product, and all the other materials used are originating and are classified in a heading other than heading 9401 or 9403 |
|||||||||||||||
9405 |
Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
9406 |
Prefabricated buildings |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
ex Chapter 95 |
Toys, games and sports requisites; parts and accessories thereof; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 9503 |
Other toys; reduced-size (‘scale’) models and similar recreational models, working or not; puzzles of all kinds |
Manufacture in which:
|
|||||||||||||
ex 9506 |
Golf clubs and parts thereof |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, roughly-shaped blocks for making golf-club heads may be used |
|||||||||||||
ex Chapter 96 |
Miscellaneous manufactured articles; except for: |
Manufacture in which all the materials used are classified within a heading other than that of the product |
|||||||||||||
ex 9601 and ex 9602 |
Articles of animal, vegetable or mineral carving materials |
Manufacture from ‘worked’ carving materials of the same heading |
|||||||||||||
ex 9603 |
Brooms and brushes, (except for besoms and the like and brushes made from marten or squirrel hair), hand-operated mechanical floor sweepers, not motorised, paint pads and rollers; squeegees (other than roller squeegees). |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
|||||||||||||
9605 |
Travel sets for personal toilet, sewing or shoe or clothes cleaning |
Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided their total value does not exceed 15 % of the ex-works price of the set |
|||||||||||||
9606 |
Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles button blanks |
Manufacture in which:
|
|||||||||||||
9608 |
Ball-point pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609 |
Manufacture in which all the materials used are classified within a heading other than that of the product. However, nibs or nib-points classified within the same heading may be used |
|||||||||||||
9612 |
Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes |
Manufacture in which:
|
|||||||||||||
ex 9613 |
Lighters with piezo-igniter |
Manufacture in which the value of all the materials of heading 9613 used does not exceed 30 % of the ex-works price of the product |
|||||||||||||
ex 9614 |
Smoking pipes and pipe bowls |
Manufacture from roughly shaped blocks |
|||||||||||||
Chapter 97 |
Works of art, collectors' pieces and antiques |
Manufacture in which all the materials used are classified within a heading other than that of the product |
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
For the special conditions relating to ‘specific processes’, see Introductory Note 7.2.
-
For the special conditions relating to ‘specific processes’, see Introductory Note 7.2.
-
For the special conditions relating to ‘specific processes’, see Introductory Note 7.2.
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided they are not classified in another heading in Chapter 32.
-
A ‘group’ is regarded as any part of the heading separated from the rest by a semi-colon.
-
For the special conditions relating to ‘specific processes’, see Introductory Notes 7.1 and 7.3.
-
In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product.
-
In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product.
-
In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product.
-
The following foils shall be considered as highly transparent: foils, the optical dimming of which, measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor), is less than 2 %.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
See Introductory Note 6.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
See Introductory Note 6.
-
See Introductory Note 6.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembling pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6.
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
-
SEMII – Semiconductor Equipment and Materials Institute Incorporated.
ANNEX II-A TO PROTOCOL 1
DEROGATIONS FROM THE LIST OF WORKING OR PROCESSING TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO ACQUIRE ORIGINATING STATUS
The products mentioned in the list may not all be covered by the Agreement. It is, therefore, necessary to consult the other parts of the Agreement.
Common provisions
1. |
For the products listed in the table below, the following rules may also apply instead of the rules set out in Annex II to this Protocol. |
2. |
A proof of origin issued or made out pursuant to this Annex shall bear the following entry in French: ‘Dérogation - Annexe II-A du protocole no 1… - Matières de la position SH no … originaires de … utilisées.’ . This entry shall be recorded in box 7 of the movement certificates EUR.1 referred to in Article 18 of this Protocol, or shall be added to the origin declaration referred to in Article 21 thereof. |
3. |
Côte d'Ivoire and the Member States of the European Union shall each take the steps necessary to implement this Annex. |
HS heading |
Product description |
Special derogation concerning working or processing carried out on non-originating materials that confers originating status |
||||||||||
Chapter 2 |
Meat and edible meat offal |
All meat and edible offal must be wholly obtained |
||||||||||
Chapter 4 |
Dairy produce; birds' eggs, natural honey, edible products of animal origin, not elsewhere specified or included |
Manufacture in which:
|
||||||||||
Chapter 6 |
Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage |
Manufacture in which all the materials of Chapter 6 used are wholly obtained or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products |
||||||||||
0812 - 0814 |
Fruit and nuts, provisionally preserved; fruit, dried, other than that of headings 0801 to 0806 ; Peel of citrus fruits or melons |
Manufacture in which the content of materials of Chapter 8 used does not exceed 30 % of the weight of the final product |
||||||||||
Chapter 9 |
Coffee, tea, maté and spices |
Manufacture from materials of any heading |
||||||||||
1101 - 1104 |
Grain mill products |
Manufacture from materials of Chapter 10, except rice of heading 1006 |
||||||||||
1105 - 1109 |
Flour, meal, powder, flakes of potatoes, etc.; starches; inulin; wheat gluten |
Manufacture in which the content of non-originating materials does not exceed 20 % by weight or Manufacture from materials of Chapter 10, except materials of heading 1006 , in which the materials of heading 0710 and of subheading 0710 10 used are wholly obtained |
||||||||||
Chapter 12 |
Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder |
Manufacture from materials of any heading except that of the product |
||||||||||
1301 |
Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams) |
Manufacture from materials of any heading |
||||||||||
1302 |
Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:
|
Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the products |
||||||||||
1506 |
Other animal fats and oils and their fractions, whether or not refined, but not chemically modified |
Manufacture from materials of any heading except that of the product |
||||||||||
ex 1507 to 1515 |
Vegetable oils and their fractions:
|
Manufacture from materials of any subheading except that of the product |
||||||||||
1516 |
Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared |
Manufacture from materials classified in a heading other than that of the product |
||||||||||
Chapter 18 |
Cocoa and cocoa preparations |
Manufacture:
|
||||||||||
1901 |
Food preparations of flour, groats, meal, starch or malt extract, not containing cocoa in more than 40 % by weight calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading 0401 to 0404 , containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included |
Manufacture:
|
||||||||||
1902 |
Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared |
Manufacture in which:
|
||||||||||
1903 |
Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or in similar forms:
|
Manufacture from materials of any heading except that of the product |
||||||||||
1904 |
Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour and meal), pre-cooked or otherwise prepared, not elsewhere specified or included |
Manufacture:
|
||||||||||
1905 |
Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products |
Manufacture in which the content of materials of Chapter 11 used does not exceed 20 % by weight |
||||||||||
ex Chapter 20 |
Preparations of vegetables, fruit, nuts or other parts of plants:
|
Manufacture:
or Manufacture:
|
||||||||||
Chapter 21 |
Miscellaneous edible preparations |
Manufacture:
or Manufacture:
|
||||||||||
Chapter 23 |
Residues and waste from the food industries; prepared animal fodder |
Manufacture:
or Manufacture:
|
||||||||||
Chapter 32 |
Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks |
Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
Chapter 33 |
Essential oils and resinoids; perfumery, cosmetic or toilet preparations |
Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
ex Chapter 34 |
Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster; except: |
Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product |
||||||||||
ex 3404 |
Artificial waxes and prepared waxes:
|
Manufacture from materials of any heading |
||||||||||
Chapter 35 |
Albuminoidal substances; modified starches; glues; enzymes |
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
Chapter 36 |
Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations |
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
Chapter 37 |
Photographic or cinematographic goods |
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
Chapter 38 |
Miscellaneous chemical products |
Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
ex 3922 to 3926 |
Articles of plastics |
Manufacture in which all the materials used are classified in a heading other than that of the product. |
||||||||||
ex Chapter 41 |
Raw hides and skins (other than furskins) and leather |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
4101 - 4103 |
Raw hides and skins of bovine (including buffalo) or equine animals (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split; raw skins of sheep or lambs (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not with wool on or split, other than those excluded by Note 1(c) to Chapter 41; other raw hides and skins (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split, other than those excluded by Notes 1(b) or 1(c) to Chapter 41 |
Manufacture from materials of any heading |
||||||||||
4104 - 4106 |
Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared |
Retanning of pre-tanned leather |
||||||||||
Chapter 42 |
Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut) |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
Chapter 46 |
Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
Chapter 48 |
Paper and paperboard; articles of paper pulp, of paper or of paperboard |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
ex 6117 |
Other made-up clothing accessories; knitted or crocheted parts of garments or of clothing accessories |
Spinning of natural and/or man-made staple fibres, or extrusion of man-made filament yarn, accompanied by knitting (knitted to shape products) or Dyeing of yarn of natural fibres accompanied by knitting (knitted to shape products) |
||||||||||
6213 and 6214 |
Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:
|
Weaving accompanied by making-up (including cutting) or Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (1) or Making-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product Weaving accompanied by making-up (including cutting) or Making-up preceded by printing accompanied by at least two preparatory finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product |
||||||||||
6307 |
Other made-up articles, including dress patterns |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||
6308 |
Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale |
Each item of the set must satisfy the rule which would apply to it if it were not included in the set. However, the value of the non-originating articles must not exceed 35 % of the ex-works price of the set |
||||||||||
ex Chapter 64 |
Footwear, gaiters and the like |
Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components |
||||||||||
Chapter 69 |
Ceramic products |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||
ex Chapter 71 |
Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin, except for: |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
||||||||||
7106 , 7108 and 7110 |
Precious metals:
|
Manufacture from materials of any heading, except those of headings 7106 , 7108 and 7110 or Electrolytic, thermal or chemical separation of precious metals of heading 7106 , 7108 or 7110 or Fusion and/or alloying of precious metals of heading 7106 , 7108 or 7110 with each other or with base metals Manufacture from unwrought precious metals |
||||||||||
7115 |
Other articles of precious metal or of metal clad with precious metal |
Manufacture from materials of any heading except that of the product |
||||||||||
Chapter 83 |
Miscellaneous articles of base metal |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||
ex 8302 |
Other mountings, fittings and similar articles suitable for buildings, and automatic door closers |
Manufacture in which all the materials used are classified in a heading other than that of the product. However, the other materials of heading 8302 may be used provided their value does not exceed 30 % of the ex-works price of the product |
||||||||||
ex 8306 |
Statuettes and other ornaments, of base metal |
Manufacture in which all the materials used are classified in a heading other than that of the product. However, the other materials of heading 8306 may be used provided their value does not exceed 40 % of the ex-works price of the product |
||||||||||
Chapter 84 |
Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||
Chapter 85 |
Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles |
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||
Chapter 87 |
Vehicles other than railway or tramway rolling stock, and parts and accessories thereof |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product |
||||||||||
Chapter 94 |
Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings |
Manufacture in which all the materials used are classified in a heading other than that of the product or Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product |
-
For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.
ANNEX III TO PROTOCOL 1
FORM FOR MOVEMENT CERTIFICATE EUR.1
1. |
Movement certificates EUR.1 shall be made out on the basis of the form of which a specimen appears in this Annex. This form shall be printed in one or more of the languages in which the Agreement is drawn up. Certificates shall be made out in one of these languages and in accordance with the provisions of the domestic law of the exporting State. If they are handwritten, they shall be completed in ink in printed characters. |
2. |
Each certificate shall measure 210 × 297 mm; a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 60 g/m2. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye. |
3. |
The exporting States may reserve the right to print the certificates themselves or may have them printed by approved printers. In the latter case, each certificate must include a reference to such approval. Each certificate must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified. |
MOVEMENT CERTIFICATE
APPLICATION FOR A MOVEMENT CERTIFICATE
DECLARATION BY THE EXPORTER
ANNEX IV TO PROTOCOL 1
ORIGIN DECLARATION
ANNEX V-A TO PROTOCOL 1
SUPPLIER DECLARATION FOR PRODUCTS HAVING PREFERENTIAL ORIGIN STATUS
I, the undersigned, declare that the goods listed on this invoice …(1) were produced in …(2) and satisfy the rules of origin governing preferential trade between Côte d'Ivoire and the European Union.
I undertake to make available to the customs authorities, if required, evidence in support of this declaration.
…(3) …(4) …(5)
Note
The abovementioned text, suitably completed in conformity with the footnotes below, constitutes a supplier's declaration. The footnotes do not have to be reproduced.
(1) |
|
(2) |
The European Union, a Member State of the European Union, Côte d'Ivoire, an OCT or another ACP State having applied a EPA at least on a provisional basis. Where Côte d'Ivoire, an OCT or another ACP State having applied an EPA at least on a provisional basis is given, reference must also be made to the EU customs office holding any relevant movement certificate(s) EUR.1 or EUR.2, giving the reference number(s) of the certificate(s) or form(s) concerned and, if possible, the relevant customs entry number. |
(3) |
Place and date. |
(4) |
Name and function in company. |
(5) |
Signature. |
ANNEX V-B TO PROTOCOL 1
SUPPLIER DECLARATION FOR PRODUCTS NOT HAVING PREFERENTIAL ORIGIN STATUS
I, the undersigned, declare that the goods listed on this invoice …(1) were produced …(2) and incorporate the following components or materials which do not originate in Côte d'Ivoire, in another ACP State having applied an EPA at least on a provisional basis, in an OCT or in the European Union for preferential trade:
…(3)…(4)
…(5)
… …(6)
I undertake to make available to the customs authorities, if required, evidence in support of this declaration.
…(7)…(8)
…(9)
Note
The abovementioned text, suitably completed in conformity with the footnotes below, constitutes a supplier's declaration. The footnotes do not have to be reproduced.
(1) |
|
(2) |
The European Union, a Member State of the European Union, Côte d'Ivoire, an OCT or another ACP State having applied a EPA at least on a provisional basis. |
(3) |
A description of the product is to be given in all cases. The description must be adequate and should be sufficiently detailed to allow the tariff classification of the goods concerned to be determined. |
(4) |
Customs values to be given only if required. |
(5) |
Country of origin to be given only if required. The origin to be given must be a preferential origin, all other origins to be given as ‘third country’. |
(6) |
‘and have undergone the following processing in [the European Union] [a Member State of the European Union] [Côte d'Ivoire] [an OCT] [another ACP State having applied an EPA at least on a provisional basis] …’, to be added with a description of the processing carried out if this information is required. |
(7) |
Place and date. |
(8) |
Name and function in company. |
(9) |
Signature. |
ANNEX VI TO PROTOCOL 1
INFORMATION CERTIFICATE
1. |
The form of the information certificate given in this Annex shall be used; it shall be printed in one or more of the official languages in which the Agreement is drawn up and shall be in accordance with the provisions of the domestic law of the exporting State. Information certificates shall be completed in one of those languages; if they are handwritten, they shall be completed in ink in capital letters. They shall bear a serial number, whether or not printed, by which they can be identified. |
2. |
The information certificate shall measure 210 × 297 mm, a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper must be white, sized for writing, not containing mechanical pulp and weighing not less than 65 g/m2. |
3. |
The national administrations may reserve the right to print the forms themselves or may have them printed by printers approved by them. In the latter case, each certificate must include a reference to such approval. The forms shall bear the name and address of the printer or a mark by which the printer can be identified. |
ANNEX VII TO PROTOCOL 1
FORM FOR APPLICATION FOR A DEROGATION
1.1 Customs classification (HS heading) |
|
Customs classification (HS heading) |
|
|
|
|
|
|
|
|
|
from … to… |
|
|
|
|
|
|
|
|
NOTES
1. |
If the boxes in the form are not sufficient to contain all relevant information, additional pages may be attached to the form. In this case, ‘see annex’ must be indicated in the appropriate box. |
2. |
If possible, samples or other illustrative material (pictures, designs, catalogues, etc.) of the final product and of the materials used should accompany the form. |
3. |
A form shall be completed for each product covered by the request.
|
ANNEX VIII TO PROTOCOL 1
OVERSEAS COUNTRIES AND TERRITORIES
Within the meaning of this Protocol ‘overseas countries and territories’ are the countries and territories referred to in Annex II to the Treaty on the Functioning of the European Union listed below:
(This list is without prejudice to the status of these countries and territories, or to future changes in their status.)
1. |
Overseas countries and territories of the Kingdom of Denmark:
|
2. |
Overseas countries and territories of the French Republic:
|
3. |
Overseas countries and territories of the Kingdom of the Netherlands:
|
4. |
Overseas countries and territories of the United Kingdom of Great Britain and Northern Ireland:
|
ANNEX IX TO PROTOCOL 1
PRODUCTS REFERRED TO IN ARTICLE 7(4) OF THE PROTOCOL
CN code |
Description |
1701 |
Cane or beet sugar and chemically pure sucrose, in solid form. |
1702 |
Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel. |
1704 90 99 |
Sugar confectionery (including white chocolate), not containing cocoa: other: other: other: other: other: |
1806 10 30 |
Chocolate and other food preparations containing cocoa: cocoa powder, containing added sugar or other sweetening matter: containing 65 % or more but less than 80 % by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose |
1806 10 90 |
Chocolate and other food preparations containing cocoa: cocoa powder, containing added sugar or other sweetening matter: containing 80 % or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose |
1806 20 95 |
Chocolate and other food preparations containing cocoa: other preparations in blocks, slabs or bars weighing more than 2 kg or in liquid, paste, powder, granular or other bulk form in containers or immediate packings, of a content exceeding 2 kg: other: other |
1901 90 99 |
Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included: other: other: other |
2101 12 98 |
Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof: extracts, essences and concentrates, of coffee, and preparations with a basis of these extracts, essences or concentrates or with a basis of coffee: preparations with a basis of these extracts, essences or concentrates or with a basis of coffee: other |
2101 20 98 |
Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof: extracts, essences and concentrates, of tea or maté, and preparations with a basis of these extracts, essences or concentrates, or with a basis of tea or maté: preparations: other |
2106 90 59 |
Food preparations not elsewhere specified or included: other flavoured or coloured sugar syrups: other other |
2106 90 98 |
Food preparations not elsewhere specified or included: other other other |
3302 10 29 |
Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages: of a kind used in the food or drink industries: of a kind used in the drink industries: preparations containing all flavouring agents characterising a beverage: other other |
JOINT DECLARATION
concerning the Principality of Andorra
1. |
Products originating in the Principality of Andorra falling within Chapters 25 to 97 of the Harmonised System shall be accepted by Côte d'Ivoire as originating in the European Union within the meaning of this Agreement. |
2. |
Protocol 1 concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation shall apply mutatis mutandis for the purpose of defining the originating status of the above-mentioned products. |
JOINT DECLARATION
concerning the Republic of San Marino
1. |
Products originating in the Republic of San Marino shall be accepted by Côte d’Ivoire as originating in the European Union within the meaning of this Agreement. |
2. |
Protocol 1 concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation shall apply mutatis mutandis for the purpose of defining the originating status of the above-mentioned products. |
This summary has been adopted from EUR-Lex.