On the basis of principles enshrined in Article 175(3) of the Treaty, the Sixth Community Environment Action Programme, adopted by Decision No 1600/2002/EC of the European Parliament and of the Council (3), establishes the need to reduce pollution to levels which minimise harmful effects on human health, paying particular attention to sensitive populations, and the environment as a whole, to improve the monitoring and assessment of air quality including the deposition of pollutants and to provide information to the public.
(2)
Article 4(1) of Council Directive 96/62/EC of 27 September 1996 on ambient air quality assessment and management (4) requires the Commission to submit proposals for regulating the pollutants listed in Annex I to that Directive taking into account the provisions laid down in paragraphs 3 and 4 of that Article.
(3)
Scientific evidence shows that arsenic, cadmium, nickel and some polycyclic aromatic hydrocarbons are human genotoxic carcinogens and that there is no identifiable threshold below which these substances do not pose a risk to human health. Impact on human health and the environment occurs via concentrations in ambient air and via deposition. With a view to cost-effectiveness, ambient air concentrations of arsenic, cadmium, nickel and polycyclic aromatic hydrocarbons, which would not pose a significant risk to human health, cannot be achieved in specific areas.
(4)
With the aim of minimising harmful effects on human health, paying particular attention to sensitive populations, and the environment as a whole, of airborne arsenic, cadmium and nickel and polycyclic aromatic hydrocarbons, target values should be set, to be attained as far as possible. Benzo(a)pyrene should be used as a marker for the carcinogenic risk of polycyclic aromatic hydrocarbons in ambient air.
(5)
The target values would not require any measures entailing disproportionate costs. Regarding industrial installations, they would not involve measures beyond the application of best available techniques (BAT) as required by Council Directive 96/61/EC of 24 September 1996 concerning integrated pollution prevention and control (5) and in particular would not lead to the closure of installations. However, they would require Member States to take all cost-effective abatement measures in the relevant sectors.
(6)
In particular, the target values of this Directive are not to be considered as environmental quality standards as defined in Article 2(7) of Directive 96/61/EC and which, according to Article 10 of that Directive, require stricter conditions than those achievable by the use of BAT.
(7)
In accordance with Article 176 of the Treaty, Member States may maintain or introduce more stringent protective measures relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons provided that they are compatible with the Treaty and that they are notified to the Commission.
(8)
Where concentrations exceed certain assessment thresholds, monitoring of arsenic, cadmium, nickel and benzo(a)pyrene should be mandatory. Supplementary means of assessment may reduce the required number of sampling points for fixed measurements. Further monitoring of background ambient air concentrations and deposition is foreseen.
(9)
Mercury is a very hazardous substance for human health and the environment. It is present throughout the environment and, in the form of methylmercury, has the capacity to accumulate in organisms, and in particular to concentrate in organisms higher up the food chain. Mercury released into the atmosphere is capable of being transported over long distances.
(10)
The Commission intends to come forward in 2005 with a coherent strategy containing measures to protect human health and the environment from the release of mercury, based on a life-cycle approach, and taking into account production, use, waste treatment and emissions. In this context, the Commission should consider all appropriate measures with a view to reducing the quantity of mercury in terrestrial and aquatic ecosystems, and thereby the ingestion of mercury via food, and avoiding mercury in certain products.
(11)
The effects of arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons on human health, including via the food chain, and the environment as a whole, occur through concentrations in ambient air and via deposition; the accumulation of these substances in soils and the protection of ground water should be taken into account. In order to facilitate review of this Directive in 2010, the Commission and the Member States should consider promoting research into the effects of arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons on human health and the environment, particularly via deposition.
(12)
Standardised accurate measurement techniques and common criteria for the location of measuring stations are important elements in assessing ambient air quality so that the information obtained is comparable throughout the Community. Providing reference measurement methods is acknowledged to be an important issue. The Commission has already mandated work on the preparation of CEN standards for the measurement of those constituents in ambient air where target values are defined (arsenic, cadmium, nickel and benzo(a)pyrene) as well as for the deposition of heavy metals with a view to their early development and adoption. In the absence of CEN standard methods, the use of international or national standard reference measurement methods should be permitted.
(13)
Information on the concentrations and the deposition of the regulated pollutants should be forwarded to the Commission as a basis for regular reports.
(14)
Up-to-date information on ambient air concentrations and deposition of regulated pollutants should be readily available to the public.
(15)
The Member States should lay down rules on penalties applicable to infringements of the provisions of this Directive and ensure that they are implemented. Those penalties should be effective, proportionate and dissuasive.
(16)
The measures necessary for the implementation of this Directive should be adopted in accordance with Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the Commission (6).
(17)
The amendments necessary for adaptation of this Directive to scientific and technical progress should relate solely to criteria and techniques for the assessment of concentrations and deposition of regulated pollutants or detailed arrangements for forwarding information to the Commission. They should not have the effect of modifying the target values either directly or indirectly,
